Add web only amd64 build and push target to Makefile

Fix typo in arm64 docker/webonly/Dockerfile -> docker/main/Dockerfile

.cspell/frigate-dictionary.txt

@@ -0,0 +1,168 @@
+rtmp
+edgetpu
+labelmap
+rockchip
+jetson
+rocm
+vaapi
+CUDA
+hwaccel
+RTSP
+Hikvision
+Dahua
+Amcrest
+Reolink
+Loryta
+Beelink
+Celeron
+vaapi
+blakeblackshear
+workdir
+onvif
+autotracking
+openvino
+tflite
+deepstack
+codeproject
+udev
+tailscale
+restream
+restreaming
+webrtc
+ssdlite
+mobilenet
+mosquitto
+datasheet
+Jellyfin
+Radeon
+libva
+Ubiquiti
+Unifi
+Tapo
+Annke
+autotracker
+autotracked
+variations
+ONVIF
+traefik
+devcontainer
+rootfs
+ffprobe
+autotrack
+logpipe
+imread
+imwrite
+imencode
+imutils
+thresholded
+timelapse
+ultrafast
+sleeptime
+radeontop
+vainfo
+tmpfs
+homography
+websockets
+LIBAVFORMAT
+NTSC
+onnxruntime
+fourcc
+radeonsi
+paho
+imagestream
+jsonify
+cgroups
+sysconf
+memlimit
+gpuload
+nvml
+setproctitle
+psutil
+Kalman
+frontdoor
+namedtuples
+zeep
+fflags
+probesize
+wallclock
+rknn
+socs
+pydantic
+shms
+imdecode
+colormap
+webui
+mse
+jsmpeg
+unreviewed
+Chromecast
+Swipeable
+flac
+scroller
+cmdline
+toggleable
+bottombar
+opencv
+apexcharts
+buildx
+mqtt
+rawvideo
+defragment
+Norfair
+subclassing
+yolo
+tensorrt
+blackshear
+stylelint
+HACS
+homeassistant
+hass
+castable
+mobiledet
+framebuffer
+mjpeg
+substream
+codeowner
+noninteractive
+restreamed
+mountpoint
+fstype
+OWASP
+iotop
+letsencrypt
+fullchain
+lsusb
+iostat
+usermod
+balena
+passwordless
+debconf
+dpkg
+poweroff
+surveillance
+qnap
+homekit
+colorspace
+quantisation
+skylake
+Cuvid
+foscam
+onnx
+numpy
+protobuf
+aarch
+amdgpu
+chipset
+referer
+mpegts
+webp
+authelia
+authentik
+unichip
+rebranded
+udevadm
+automations
+unraid
+hideable
+healthcheck
+keepalive

.devcontainer/devcontainer.json

@@ -10,10 +10,14 @@
   "features": {
     "ghcr.io/devcontainers/features/common-utils:1": {}
   },
-  "forwardPorts": [5000, 5001, 5173, 1935, 8554, 8555],
+  "forwardPorts": [8971, 5000, 5001, 5173, 8554, 8555],
   "portsAttributes": {
+    "8971": {
+      "label": "External NGINX",
+      "onAutoForward": "silent"
+    },
     "5000": {
-      "label": "NGINX",
+      "label": "Internal NGINX",
       "onAutoForward": "silent"
     },
     "5001": {
@@ -24,10 +28,6 @@
       "label": "Vite Server",
       "onAutoForward": "silent"
     },
-    "1935": {
-      "label": "RTMP",
-      "onAutoForward": "silent"
-    },
     "8554": {
       "label": "gortc RTSP",
       "onAutoForward": "silent"

.github/DISCUSSION_TEMPLATE/camera-support.yml

@@ -0,0 +1,135 @@
+title: "[Camera Support]: "
+labels: ["support", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support or questions for an issue with your cameras.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: What browser(s) are you using?
+      placeholder: Google Chrome 88.0.4324.150
+      description: >
+        Provide the full name and don't forget to add the version!
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: ffprobe
+    attributes:
+      label: FFprobe output from your camera
+      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: stats
+    attributes:
+      label: Frigate stats
+      description: Output from frigate's /api/stats endpoint
+      render: json
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: object-detector
+    attributes:
+      label: Object Detector
+      options:
+        - Coral
+        - OpenVino
+        - TensorRT
+        - RKNN
+        - Other
+        - CPU (no Coral)
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/config-support.yml

@@ -0,0 +1,102 @@
+title: "[Config Support]: "
+labels: ["support", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support or questions related to Frigate's configuration and config file.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: stats
+    attributes:
+      label: Frigate stats
+      description: Output from frigate's /api/stats endpoint
+      render: json
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: object-detector
+    attributes:
+      label: Object Detector
+      options:
+        - Coral
+        - OpenVino
+        - TensorRT
+        - RKNN
+        - Other
+        - CPU (no coral)
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop or simple cut/paste is possible in this field
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/detector-support.yml

@@ -0,0 +1,106 @@
+title: "[Detector Support]: "
+labels: ["support", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support or questions related to Frigate's object detectors.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: docker
+    attributes:
+      label: docker-compose file or Docker CLI command
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: object-detector
+    attributes:
+      label: Object Detector
+      options:
+        - Coral
+        - OpenVino
+        - TensorRT
+        - RKNN
+        - Other
+        - CPU (no coral)
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/general-support.yml

@@ -0,0 +1,133 @@
+title: "[Support]: "
+labels: ["support", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support for issues that don't fall into any specific category.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: What browser(s) are you using?
+      placeholder: Google Chrome 88.0.4324.150
+      description: >
+        Provide the full name and don't forget to add the version!
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: ffprobe
+    attributes:
+      label: FFprobe output from your camera
+      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: stats
+    attributes:
+      label: Frigate stats
+      description: Output from frigate's /api/stats endpoint
+      render: json
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: object-detector
+    attributes:
+      label: Object Detector
+      options:
+        - Coral
+        - OpenVino
+        - TensorRT
+        - RKNN
+        - Other
+        - CPU (no coral)
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/hardware-acceleration-support.yml

@@ -0,0 +1,124 @@
+title: "[HW Accel Support]: "
+labels: ["support", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form to submit a support request for hardware acceleration issues.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: In which browser(s) are you experiencing the issue with?
+      placeholder: Google Chrome 88.0.4324.150
+      description: >
+        Provide the full name and don't forget to add the version!
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: docker
+    attributes:
+      label: docker-compose file or Docker CLI command
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: ffprobe
+    attributes:
+      label: FFprobe output from your camera
+      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
+      render: shell
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/question.yml

@@ -0,0 +1,21 @@
+title: "[Question]: "
+labels: ["question"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for questions you have about Frigate.
+
+        Before submitting your question, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        **If you are looking for support, start a new discussion and use a support category.**
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: "What is your question?"
+    validations:
+      required: true

.github/DISCUSSION_TEMPLATE/report-a-bug.yml

@@ -0,0 +1,146 @@
+title: "[Bug]: "
+labels: ["bug", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form to submit a reproducible bug in Frigate or Frigate's UI.
+
+        Before submitting your bug report, please [search the discussions][discussions], look at recent open and closed [pull requests][prs], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your bug has already been fixed by the developers or reported by the community.
+
+        **If you are unsure if your issue is actually a bug or not, please submit a support request first.**
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [prs]: https://www.github.com/blakeblackshear/frigate/pulls
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: checkboxes
+    attributes:
+      label: Checklist
+      description: Please verify that you've followed these steps
+      options:
+        - label: I have updated to the latest available Frigate version.
+          required: true
+        - label: I have cleared the cache of my browser.
+          required: true
+        - label: I have tried a different browser to see if it is related to my browser.
+          required: true
+        - label: I have tried reproducing the issue in [incognito mode](https://www.computerworld.com/article/1719851/how-to-go-incognito-in-chrome-firefox-safari-and-edge.html) to rule out problems with any third party extensions or plugins I have installed.
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+      description: Provide a clear and concise description of what the bug is.
+    validations:
+      required: true
+  - type: textarea
+    id: steps
+    attributes:
+      label: Steps to reproduce
+      description: |
+        Please tell us exactly how to reproduce your issue.
+        Provide clear and concise step by step instructions and add code snippets if needed.
+      value: |
+        1.
+        2.
+        3.
+        ...
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: In which browser(s) are you experiencing the issue with?
+      placeholder: Google Chrome 88.0.4324.150
+      description: >
+        Provide the full name and don't forget to add the version!
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: docker
+    attributes:
+      label: docker-compose file or Docker CLI command
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of all tabs.
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/FUNDING.yml

@@ -1,3 +1,4 @@
 github:
   - blakeblackshear
   - NickM-27
+  - hawkeye217

.github/ISSUE_TEMPLATE/camera_support_request.yml

@@ -1,107 +0,0 @@
-name: Camera Support Request
-description: Support for setting up cameras in Frigate
-title: "[Camera Support]: "
-labels: ["support", "triage"]
-assignees: []
-body:
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the Debug page in the Web UI
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: logs
-    attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: ffprobe
-    attributes:
-      label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` and provide output below
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: stats
-    attributes:
-      label: Frigate stats
-      description: Output from frigate's /api/stats endpoint
-      render: json
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - HassOS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - HassOS Addon
-        - Docker Compose
-        - Docker CLI
-    validations:
-      required: true
-  - type: dropdown
-    id: coral
-    attributes:
-      label: Coral version
-      options:
-        - USB
-        - PCIe
-        - M.2
-        - Dev Board
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/ISSUE_TEMPLATE/config.yml

@@ -1 +1,8 @@
 blank_issues_enabled: false
+contact_links:
+  - name: Frigate Support
+    url: https://github.com/blakeblackshear/frigate/discussions/new/choose
+    about: Get support for setting up or troubleshooting Frigate.
+  - name: Frigate Bug Report
+    url: https://github.com/blakeblackshear/frigate/discussions/new/choose
+    about: Report a specific UI or backend bug.

.github/ISSUE_TEMPLATE/config_support_request.yml

@@ -1,82 +0,0 @@
-name: Config Support Request
-description: Support for Frigate configuration
-title: "[Config Support]: "
-labels: ["support", "triage"]
-assignees: []
-body:
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the Debug page in the Web UI
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: logs
-    attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: stats
-    attributes:
-      label: Frigate stats
-      description: Output from frigate's /api/stats endpoint
-      render: json
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - HassOS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - HassOS Addon
-        - Docker Compose
-        - Docker CLI
-    validations:
-      required: true
-  - type: dropdown
-    id: coral
-    attributes:
-      label: Coral version
-      options:
-        - USB
-        - PCIe
-        - M.2
-        - Dev Board
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/ISSUE_TEMPLATE/detector_support_request.yml

@@ -1,84 +0,0 @@
-name: Detector Support Request
-description: Support for setting up object detector in Frigate (Coral, OpenVINO, TensorRT, etc.)
-title: "[Detector Support]: "
-labels: ["support", "triage"]
-assignees: []
-body:
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the Debug page in the Web UI
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: logs
-    attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - HassOS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - HassOS Addon
-        - Docker Compose
-        - Docker CLI
-    validations:
-      required: true
-  - type: dropdown
-    id: coral
-    attributes:
-      label: Coral version
-      options:
-        - USB
-        - PCIe
-        - M.2
-        - Dev Board
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/ISSUE_TEMPLATE/general_support_request.yml

@@ -1,107 +0,0 @@
-name: General Support Request
-description: General support request for Frigate
-title: "[Support]: "
-labels: ["support", "triage"]
-assignees: []
-body:
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the Debug page in the Web UI
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: logs
-    attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: ffprobe
-    attributes:
-      label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` and provide output below
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: stats
-    attributes:
-      label: Frigate stats
-      description: Output from frigate's /api/stats endpoint
-      render: json
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - HassOS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - HassOS Addon
-        - Docker Compose
-        - Docker CLI
-    validations:
-      required: true
-  - type: dropdown
-    id: coral
-    attributes:
-      label: Coral version
-      options:
-        - USB
-        - PCIe
-        - M.2
-        - Dev Board
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/ISSUE_TEMPLATE/hwaccel_support_request.yml

@@ -1,96 +0,0 @@
-name: Hardware Acceleration Support Request
-description: Support for setting up GPU hardware acceleration in Frigate
-title: "[HW Accel Support]: "
-labels: ["support", "triage"]
-assignees: []
-body:
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the Debug page in the Web UI
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: logs
-    attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: ffprobe
-    attributes:
-      label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` and provide output below
-      render: shell
-    validations:
-      required: true
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - HassOS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - HassOS Addon
-        - Docker Compose
-        - Docker CLI
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/actions/setup/action.yml

@@ -5,17 +5,28 @@ inputs:
     required: true
 outputs:
   image-name:
-    value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ github.ref_name }}-${{ steps.create-short-sha.outputs.SHORT_SHA }}
+    value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ steps.create-short-sha.outputs.SHORT_SHA }}
   cache-name:
     value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:cache
 runs:
   using: "composite"
   steps:
-    - name: Remove unnecessary files
-      run: |
-        sudo rm -rf /usr/share/dotnet
-        sudo rm -rf /usr/local/lib/android
-        sudo rm -rf /opt/ghc
+    # Stop docker so we can mount more space at /var/lib/docker
+    - name: Stop docker
+      run: sudo systemctl stop docker
+      shell: bash
+    # This creates a virtual volume at /var/lib/docker to maximize the size
+    # As of 2/14/2024, this results in 97G for docker images
+    - name: Maximize build space
+      uses: easimon/maximize-build-space@master
+      with:
+        remove-dotnet: 'true'
+        remove-android: 'true'
+        remove-haskell: 'true'
+        remove-codeql: 'true'
+        build-mount-path: '/var/lib/docker'
+    - name: Start docker
+      run: sudo systemctl start docker
       shell: bash
     - id: lowercaseRepo
       uses: ASzc/change-string-case-action@v5

.github/dependabot.yml

@@ -34,5 +34,7 @@ updates:
     directory: "/docs"
     schedule:
       interval: daily
+    allow:
+      - dependency-name: "@docusaurus/*"
     open-pull-requests-limit: 10
     target-branch: dev

.github/workflows/ci.yml

@@ -37,16 +37,6 @@ jobs:
           target: frigate
           tags: ${{ steps.setup.outputs.image-name }}-amd64
           cache-from: type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64
-      - name: Build and push TensorRT (x86 GPU)
-        uses: docker/bake-action@v4
-        with:
-          push: true
-          targets: tensorrt
-          files: docker/tensorrt/trt.hcl
-          set: |
-            tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt
-            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64
-            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64,mode=max
   arm64_build:
     runs-on: ubuntu-latest
     name: ARM Build
@@ -79,7 +69,7 @@ jobs:
             rpi.tags=${{ steps.setup.outputs.image-name }}-rpi
             *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64
             *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64,mode=max
-      - name: Build and push RockChip build
+      - name: Build and push Rockchip build
         uses: docker/bake-action@v3
         with:
           push: true
@@ -140,6 +130,82 @@ jobs:
             tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt-jp5
             *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp5
             *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp5,mode=max
+  amd64_extra_builds:
+    runs-on: ubuntu-latest
+    name: AMD64 Extra Build
+    needs:
+      - amd64_build
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+      - name: Set up QEMU and Buildx
+        id: setup
+        uses: ./.github/actions/setup
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      - name: Build and push TensorRT (x86 GPU)
+        env:
+          COMPUTE_LEVEL: "50 60 70 80 90"
+        uses: docker/bake-action@v4
+        with:
+          push: true
+          targets: tensorrt
+          files: docker/tensorrt/trt.hcl
+          set: |
+            tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt
+            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64
+            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64,mode=max
+      #- name: AMD/ROCm general build
+      #  env:
+      #    AMDGPU: gfx
+      #    HSA_OVERRIDE: 0
+      #  uses: docker/bake-action@v3
+      #  with:
+      #    push: true
+      #    targets: rocm
+      #    files: docker/rocm/rocm.hcl
+      #    set: |
+      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm
+      #      *.cache-from=type=gha
+      #- name: AMD/ROCm gfx900
+      #  env:
+      #    AMDGPU: gfx900
+      #    HSA_OVERRIDE: 1
+      #    HSA_OVERRIDE_GFX_VERSION: 9.0.0
+      #  uses: docker/bake-action@v3
+      #  with:
+      #    push: true
+      #    targets: rocm
+      #    files: docker/rocm/rocm.hcl
+      #    set: |
+      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm-gfx900
+      #      *.cache-from=type=gha
+      #- name: AMD/ROCm gfx1030
+      #  env:
+      #    AMDGPU: gfx1030
+      #    HSA_OVERRIDE: 1
+      #    HSA_OVERRIDE_GFX_VERSION: 10.3.0
+      #  uses: docker/bake-action@v3
+      #  with:
+      #    push: true
+      #    targets: rocm
+      #    files: docker/rocm/rocm.hcl
+      #    set: |
+      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm-gfx1030
+      #      *.cache-from=type=gha
+      #- name: AMD/ROCm gfx1100
+      #  env:
+      #    AMDGPU: gfx1100
+      #    HSA_OVERRIDE: 1
+      #    HSA_OVERRIDE_GFX_VERSION: 11.0.0
+      #  uses: docker/bake-action@v3
+      #  with:
+      #    push: true
+      #    targets: rocm
+      #    files: docker/rocm/rocm.hcl
+      #    set: |
+      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm-gfx1100
+      #      *.cache-from=type=gha
   # The majority of users running arm64 are rpi users, so the rpi
   # build should be the primary arm64 image
   assemble_default_build:
@@ -154,16 +220,16 @@ jobs:
         with:
           string: ${{ github.repository }}
       - name: Log in to the Container registry
-        uses: docker/login-action@343f7c4344506bcbf9b4de18042ae17996df046d
+        uses: docker/login-action@0d4c9c5ea7693da7b068278f7b52bda2a190a446
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
           password: ${{ secrets.GITHUB_TOKEN }}
       - name: Create short sha
         run: echo "SHORT_SHA=${GITHUB_SHA::7}" >> $GITHUB_ENV
-      - uses: int128/docker-manifest-create-action@v1
+      - uses: int128/docker-manifest-create-action@v2
         with:
-          tags: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ github.ref_name }}-${{ env.SHORT_SHA }}
-          suffixes: |
-            -amd64
-            -rpi
+          tags: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}
+          sources: |
+            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}-amd64
+            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}-rpi

.github/workflows/dependabot-auto-merge.yaml

@@ -11,7 +11,7 @@ jobs:
     steps:
       - name: Get Dependabot metadata
         id: metadata
-        uses: dependabot/fetch-metadata@v1
+        uses: dependabot/fetch-metadata@v2
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
       - name: Enable auto-merge for Dependabot PRs

.github/workflows/pull_request.yml

@@ -51,12 +51,12 @@ jobs:
       - uses: actions/checkout@v4
       - uses: actions/setup-node@master
         with:
-          node-version: 16.x
+          node-version: 20.x
       - run: npm install
         working-directory: ./web
-      - name: Test
-        run: npm run test
-        working-directory: ./web
+      # - name: Test
+      #   run: npm run test
+      #   working-directory: ./web
 
   python_checks:
     runs-on: ubuntu-latest
@@ -65,7 +65,7 @@ jobs:
       - name: Check out the repository
         uses: actions/checkout@v4
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v5.0.0
+        uses: actions/setup-python@v5.1.0
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Install requirements

.github/workflows/release.yml

@@ -16,22 +16,32 @@ jobs:
         with:
           string: ${{ github.repository }}
       - name: Log in to the Container registry
-        uses: docker/login-action@343f7c4344506bcbf9b4de18042ae17996df046d
+        uses: docker/login-action@0d4c9c5ea7693da7b068278f7b52bda2a190a446
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
           password: ${{ secrets.GITHUB_TOKEN }}
       - name: Create tag variables
         run: |
-          BRANCH=$([[ "${{ github.ref_name }}" =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]] && echo "master" || echo "dev")
+          BUILD_TYPE=$([[ "${{ github.ref_name }}" =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]] && echo "stable" || echo "beta")
+          echo "BUILD_TYPE=${BUILD_TYPE}" >> $GITHUB_ENV
           echo "BASE=ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}" >> $GITHUB_ENV
-          echo "BUILD_TAG=${BRANCH}-${GITHUB_SHA::7}" >> $GITHUB_ENV
+          echo "BUILD_TAG=${GITHUB_SHA::7}" >> $GITHUB_ENV
           echo "CLEAN_VERSION=$(echo ${GITHUB_REF##*/} | tr '[:upper:]' '[:lower:]' | sed 's/^[v]//')" >> $GITHUB_ENV
       - name: Tag and push the main image
         run: |
           VERSION_TAG=${BASE}:${CLEAN_VERSION}
+          STABLE_TAG=${BASE}:stable
           PULL_TAG=${BASE}:${BUILD_TAG}
           docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG} docker://${VERSION_TAG}
           for variant in standard-arm64 tensorrt tensorrt-jp4 tensorrt-jp5 rk; do
             docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG}-${variant} docker://${VERSION_TAG}-${variant}
           done
+
+          # stable tag
+          if [[ "${BUILD_TYPE}" == "stable" ]]; then
+            docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG} docker://${STABLE_TAG}
+            for variant in standard-arm64 tensorrt tensorrt-jp4 tensorrt-jp5 rk; do
+              docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG}-${variant} docker://${STABLE_TAG}-${variant}
+            done
+          fi

.github/workflows/stale.yml

@@ -24,3 +24,18 @@ jobs:
           operations-per-run: 120
       - name: Print outputs
         run: echo ${{ join(steps.stale.outputs.*, ',') }}
+
+  # clean_ghcr:
+  #   name: Delete outdated dev container images
+  #   runs-on: ubuntu-latest
+  #   steps:
+  #     - name: Delete old images
+  #       uses: snok/container-retention-policy@v2
+  #       with:
+  #         image-names: dev-*
+  #         cut-off: 60 days ago UTC
+  #         keep-at-least: 5
+  #         account-type: personal
+  #         token: ${{ secrets.GITHUB_TOKEN }}
+  #         token-type: github-token
+

.gitignore

@@ -8,7 +8,6 @@ config/*
 !config/*.example
 models
 *.mp4
-*.ts
 *.db
 *.csv
 frigate/version.py
@@ -17,4 +16,5 @@ web/node_modules
 web/coverage
 core
 !/web/**/*.ts
-.idea/*
+.idea/*
+.ipynb_checkpoints

CODEOWNERS

@@ -2,5 +2,5 @@
 /docker/tensorrt/ @madsciencetist @NateMeyer
 /docker/tensorrt/*arm64* @madsciencetist
 /docker/tensorrt/*jetson* @madsciencetist
-
 /docker/rockchip/ @MarcA711
+/docker/rocm/ @harakas

Makefile

@@ -1,8 +1,9 @@
 default_target: local
 
 COMMIT_HASH := $(shell git log -1 --pretty=format:"%h"|tail -1)
-VERSION = 0.13.0
-IMAGE_REPO ?= ghcr.io/blakeblackshear/frigate
+VERSION = 0.14.1
+#IMAGE_REPO ?= ghcr.io/blakeblackshear/frigate
+IMAGE_REPO ?= gitea.tremendousturtle.tools/chris/frigate
 GITHUB_REF_NAME ?= $(shell git rev-parse --abbrev-ref HEAD)
 CURRENT_UID := $(shell id -u)
 CURRENT_GID := $(shell id -g)
@@ -23,15 +24,30 @@ local: version
 amd64:
 	docker buildx build --platform linux/amd64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/main/Dockerfile .
 
+amd64_web:
+	docker buildx build --platform linux/amd64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/webonly/Dockerfile .
+
 arm64:
 	docker buildx build --platform linux/arm64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/main/Dockerfile .
 
+arm64_web:
+	docker buildx build --platform linux/arm64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/webonly/Dockerfile .
+
 build: version amd64 arm64
 	docker buildx build --platform linux/arm64/v8,linux/amd64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/main/Dockerfile .
 
+build_web: version amd64_web arm64_web
+	docker buildx build --platform linux/arm64/v8,linux/amd64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/webonly/Dockerfile .
+
 push: push-boards
 	docker buildx build --push --platform linux/arm64/v8,linux/amd64 --target=frigate --tag $(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH) --file docker/main/Dockerfile .
 
+push_web: push-boards
+	docker buildx build --push --platform linux/arm64/v8,linux/amd64 --target=frigate --tag $(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH) --file docker/webonly/Dockerfile .
+
+push_web-amd64:
+	docker buildx build --push --platform linux/amd64 --target=frigate --tag $(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH) --file docker/webonly/Dockerfile .
+
 run: local
 	docker run --rm --publish=5000:5000 --volume=${PWD}/config:/config frigate:latest
 

README.md

@@ -29,18 +29,22 @@ If you would like to make a donation to support development, please use [Github
 
 ## Screenshots
 
-Integration into Home Assistant
-
+### Live dashboard
 <div>
-<a href="docs/static/img/media_browser.png"><img src="docs/static/img/media_browser.png" height=400></a>
-<a href="docs/static/img/notification.png"><img src="docs/static/img/notification.png" height=400></a>
+<img width="800" alt="Live dashboard" src="https://github.com/blakeblackshear/frigate/assets/569905/5e713cb9-9db5-41dc-947a-6937c3bc376e">
 </div>
 
-Also comes with a builtin UI:
-
+### Streamlined review workflow
 <div>
-<a href="docs/static/img/home-ui.png"><img src="docs/static/img/home-ui.png" height=400></a>
-<a href="docs/static/img/camera-ui.png"><img src="docs/static/img/camera-ui.png" height=400></a>
+<img width="800" alt="Streamlined review workflow" src="https://github.com/blakeblackshear/frigate/assets/569905/6fed96e8-3b18-40e5-9ddc-31e6f3c9f2ff">
 </div>
 
-![Events](docs/static/img/events-ui.png)
+### Multi-camera scrubbing
+<div>
+<img width="800" alt="Multi-camera scrubbing" src="https://github.com/blakeblackshear/frigate/assets/569905/d6788a15-0eeb-4427-a8d4-80b93cae3d74">
+</div>
+
+### Built-in mask and zone editor
+<div>
+<img width="800" alt="Multi-camera scrubbing" src="https://github.com/blakeblackshear/frigate/assets/569905/d7885fc3-bfe6-452f-b7d0-d957cb3e31f5">
+</div>

cspell.json

@@ -0,0 +1,21 @@
+{
+  "version": "0.2",
+  "ignorePaths": [
+    "Dockerfile",
+    "Dockerfile.*",
+    "CMakeLists.txt",
+    "*.db",
+    "node_modules",
+    "__pycache__",
+    "dist"
+  ],
+  "language": "en",
+  "dictionaryDefinitions": [
+    {
+      "name": "frigate-dictionary",
+      "path": "./.cspell/frigate-dictionary.txt",
+      "addWords": true
+    }
+  ],
+  "dictionaries": ["frigate-dictionary"]
+}

docker/main/Dockerfile

@@ -33,15 +33,18 @@ RUN --mount=type=tmpfs,target=/tmp --mount=type=tmpfs,target=/var/cache/apt \
 FROM scratch AS go2rtc
 ARG TARGETARCH
 WORKDIR /rootfs/usr/local/go2rtc/bin
-ADD --link --chmod=755 "https://github.com/AlexxIT/go2rtc/releases/download/v1.8.4/go2rtc_linux_${TARGETARCH}" go2rtc
+ADD --link --chmod=755 "https://github.com/AlexxIT/go2rtc/releases/download/v1.9.2/go2rtc_linux_${TARGETARCH}" go2rtc
 
+FROM wget AS tempio
+ARG TARGETARCH
+RUN --mount=type=bind,source=docker/main/install_tempio.sh,target=/deps/install_tempio.sh \
+    /deps/install_tempio.sh
 
 ####
 #
 # OpenVino Support
 #
 # 1. Download and convert a model from Intel's Public Open Model Zoo
-# 2. Build libUSB without udev to handle NCS2 enumeration
 #
 ####
 # Download and Convert OpenVino model
@@ -51,17 +54,24 @@ ARG DEBIAN_FRONTEND
 # Install OpenVino Runtime and Dev library
 COPY docker/main/requirements-ov.txt /requirements-ov.txt
 RUN apt-get -qq update \
-    && apt-get -qq install -y wget python3 python3-distutils \
+    && apt-get -qq install -y wget python3 python3-dev python3-distutils gcc pkg-config libhdf5-dev \
     && wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
     && python3 get-pip.py "pip" \
     && pip install -r /requirements-ov.txt
 
 # Get OpenVino Model
-RUN mkdir /models \
-    && cd /models && omz_downloader --name ssdlite_mobilenet_v2 \
-    && cd /models && omz_converter --name ssdlite_mobilenet_v2 --precision FP16
-
+RUN --mount=type=bind,source=docker/main/build_ov_model.py,target=/build_ov_model.py \
+    mkdir /models && cd /models \
+    && wget http://download.tensorflow.org/models/object_detection/ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz \
+    && tar -xvf ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz \
+    && python3 /build_ov_model.py
 
+####
+#
+# Coral Compatibility
+#
+# Builds libusb without udev. Needed for synology and other devices with USB coral
+####
 # libUSB - No Udev
 FROM wget as libusb-build
 ARG TARGETARCH
@@ -97,11 +107,12 @@ RUN wget -qO edgetpu_model.tflite https://github.com/google-coral/test_data/raw/
 RUN wget -qO cpu_model.tflite https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess.tflite
 COPY labelmap.txt .
 # Copy OpenVino model
-COPY --from=ov-converter /models/public/ssdlite_mobilenet_v2/FP16 openvino-model
+COPY --from=ov-converter /models/ssdlite_mobilenet_v2.xml openvino-model/
+COPY --from=ov-converter /models/ssdlite_mobilenet_v2.bin openvino-model/
 RUN wget -q https://github.com/openvinotoolkit/open_model_zoo/raw/master/data/dataset_classes/coco_91cl_bkgr.txt -O openvino-model/coco_91cl_bkgr.txt && \
     sed -i 's/truck/car/g' openvino-model/coco_91cl_bkgr.txt
 # Get Audio Model and labels
-RUN wget -qO cpu_audio_model.tflite https://tfhub.dev/google/lite-model/yamnet/classification/tflite/1?lite-format=tflite
+RUN wget -qO - https://www.kaggle.com/api/v1/models/google/yamnet/tfLite/classification-tflite/1/download | tar xvz && mv 1.tflite cpu_audio_model.tflite
 COPY audio-labelmap.txt .
 
 
@@ -159,6 +170,7 @@ FROM scratch AS deps-rootfs
 COPY --from=nginx /usr/local/nginx/ /usr/local/nginx/
 COPY --from=go2rtc /rootfs/ /
 COPY --from=libusb-build /usr/local/lib /usr/local/lib
+COPY --from=tempio /rootfs/ /
 COPY --from=s6-overlay /rootfs/ /
 COPY --from=models /rootfs/ /
 COPY docker/main/rootfs/ /
@@ -176,7 +188,7 @@ ARG APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=DontWarn
 ENV NVIDIA_VISIBLE_DEVICES=all
 ENV NVIDIA_DRIVER_CAPABILITIES="compute,video,utility"
 
-ENV PATH="/usr/lib/btbn-ffmpeg/bin:/usr/local/go2rtc/bin:/usr/local/nginx/sbin:${PATH}"
+ENV PATH="/usr/lib/btbn-ffmpeg/bin:/usr/local/go2rtc/bin:/usr/local/tempio/bin:/usr/local/nginx/sbin:${PATH}"
 
 # Install dependencies
 RUN --mount=type=bind,source=docker/main/install_deps.sh,target=/deps/install_deps.sh \
@@ -191,12 +203,13 @@ COPY --from=deps-rootfs / /
 RUN ldconfig
 
 EXPOSE 5000
-EXPOSE 1935
 EXPOSE 8554
 EXPOSE 8555/tcp 8555/udp
 
 # Configure logging to prepend timestamps, log to stdout, keep 0 archives and rotate on 10MB
 ENV S6_LOGGING_SCRIPT="T 1 n0 s10000000 T"
+# Do not fail on long-running download scripts
+ENV S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0
 
 ENTRYPOINT ["/init"]
 CMD []
@@ -232,12 +245,14 @@ RUN apt-get update \
 RUN --mount=type=bind,source=./docker/main/requirements-dev.txt,target=/workspace/frigate/requirements-dev.txt \
     pip3 install -r requirements-dev.txt
 
+HEALTHCHECK NONE
+
 CMD ["sleep", "infinity"]
 
 
 # Frigate web build
 # This should be architecture agnostic, so speed up the build on multiarch by not using QEMU.
-FROM --platform=$BUILDPLATFORM node:16 AS web-build
+FROM --platform=$BUILDPLATFORM node:20 AS web-build
 
 WORKDIR /work
 COPY web/package.json web/package-lock.json ./

docker/main/build_nginx.sh

@@ -5,7 +5,8 @@ set -euxo pipefail
 NGINX_VERSION="1.25.3"
 VOD_MODULE_VERSION="1.31"
 SECURE_TOKEN_MODULE_VERSION="1.5"
-RTMP_MODULE_VERSION="1.2.2"
+SET_MISC_MODULE_VERSION="v0.33"
+NGX_DEVEL_KIT_VERSION="v0.3.3"
 
 cp /etc/apt/sources.list /etc/apt/sources.list.d/sources-src.list
 sed -i 's|deb http|deb-src http|g' /etc/apt/sources.list.d/sources-src.list
@@ -49,10 +50,16 @@ mkdir /tmp/nginx-secure-token-module
 wget https://github.com/kaltura/nginx-secure-token-module/archive/refs/tags/${SECURE_TOKEN_MODULE_VERSION}.tar.gz
 tar -zxf ${SECURE_TOKEN_MODULE_VERSION}.tar.gz -C /tmp/nginx-secure-token-module --strip-components=1
 rm ${SECURE_TOKEN_MODULE_VERSION}.tar.gz
-mkdir /tmp/nginx-rtmp-module
-wget -nv https://github.com/arut/nginx-rtmp-module/archive/refs/tags/v${RTMP_MODULE_VERSION}.tar.gz
-tar -zxf v${RTMP_MODULE_VERSION}.tar.gz -C /tmp/nginx-rtmp-module --strip-components=1
-rm v${RTMP_MODULE_VERSION}.tar.gz
+
+mkdir /tmp/ngx_devel_kit
+wget https://github.com/vision5/ngx_devel_kit/archive/refs/tags/${NGX_DEVEL_KIT_VERSION}.tar.gz
+tar -zxf ${NGX_DEVEL_KIT_VERSION}.tar.gz -C /tmp/ngx_devel_kit --strip-components=1
+rm ${NGX_DEVEL_KIT_VERSION}.tar.gz
+
+mkdir /tmp/nginx-set-misc-module
+wget https://github.com/openresty/set-misc-nginx-module/archive/refs/tags/${SET_MISC_MODULE_VERSION}.tar.gz
+tar -zxf ${SET_MISC_MODULE_VERSION}.tar.gz -C /tmp/nginx-set-misc-module --strip-components=1
+rm ${SET_MISC_MODULE_VERSION}.tar.gz
 
 cd /tmp/nginx
 
@@ -60,10 +67,13 @@ cd /tmp/nginx
     --with-file-aio \
     --with-http_sub_module \
     --with-http_ssl_module \
+    --with-http_auth_request_module \
+    --with-http_realip_module \
     --with-threads \
+    --add-module=../ngx_devel_kit \
+    --add-module=../nginx-set-misc-module \
     --add-module=../nginx-vod-module \
     --add-module=../nginx-secure-token-module \
-    --add-module=../nginx-rtmp-module \
     --with-cc-opt="-O3 -Wno-error=implicit-fallthrough"
 
 make CC="ccache gcc" -j$(nproc) && make install

docker/main/build_ov_model.py

@@ -0,0 +1,11 @@
+import openvino as ov
+from openvino.tools import mo
+
+ov_model = mo.convert_model(
+    "/models/ssdlite_mobilenet_v2_coco_2018_05_09/frozen_inference_graph.pb",
+    compress_to_fp16=True,
+    transformations_config="/usr/local/lib/python3.9/dist-packages/openvino/tools/mo/front/tf/ssd_v2_support.json",
+    tensorflow_object_detection_api_pipeline_config="/models/ssdlite_mobilenet_v2_coco_2018_05_09/pipeline.config",
+    reverse_input_channels=True,
+)
+ov.save_model(ov_model, "/models/ssdlite_mobilenet_v2.xml")

docker/main/install_deps.sh

@@ -40,7 +40,7 @@ apt-get -qq install --no-install-recommends --no-install-suggests -y \
 # btbn-ffmpeg -> amd64
 if [[ "${TARGETARCH}" == "amd64" ]]; then
     mkdir -p /usr/lib/btbn-ffmpeg
-    wget -qO btbn-ffmpeg.tar.xz "https://github.com/BtbN/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linux64-gpl-5.1.tar.xz"
+    wget -qO btbn-ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linux64-gpl-5.1.tar.xz"
     tar -xf btbn-ffmpeg.tar.xz -C /usr/lib/btbn-ffmpeg --strip-components 1
     rm -rf btbn-ffmpeg.tar.xz /usr/lib/btbn-ffmpeg/doc /usr/lib/btbn-ffmpeg/bin/ffplay
 fi
@@ -48,7 +48,7 @@ fi
 # ffmpeg -> arm64
 if [[ "${TARGETARCH}" == "arm64" ]]; then
     mkdir -p /usr/lib/btbn-ffmpeg
-    wget -qO btbn-ffmpeg.tar.xz "https://github.com/BtbN/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linuxarm64-gpl-5.1.tar.xz"
+    wget -qO btbn-ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linuxarm64-gpl-5.1.tar.xz"
     tar -xf btbn-ffmpeg.tar.xz -C /usr/lib/btbn-ffmpeg --strip-components 1
     rm -rf btbn-ffmpeg.tar.xz /usr/lib/btbn-ffmpeg/doc /usr/lib/btbn-ffmpeg/bin/ffplay
 fi

docker/main/install_tempio.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+set -euxo pipefail
+
+tempio_version="2021.09.0"
+
+if [[ "${TARGETARCH}" == "amd64" ]]; then
+    arch="amd64"
+elif [[ "${TARGETARCH}" == "arm64" ]]; then
+    arch="aarch64"
+fi
+
+mkdir -p /rootfs/usr/local/tempio/bin
+
+wget -q -O /rootfs/usr/local/tempio/bin/tempio "https://github.com/home-assistant/tempio/releases/download/${tempio_version}/tempio_${arch}"
+chmod 755 /rootfs/usr/local/tempio/bin/tempio

docker/main/requirements-ov.txt

@@ -1,5 +1,3 @@
 numpy
-# Openvino Library - Custom built with MYRIAD support
-openvino @ https://github.com/NateMeyer/openvino-wheels/releases/download/multi-arch_2022.3.1/openvino-2022.3.1-1-cp39-cp39-manylinux_2_31_x86_64.whl; platform_machine == 'x86_64'
-openvino @ https://github.com/NateMeyer/openvino-wheels/releases/download/multi-arch_2022.3.1/openvino-2022.3.1-1-cp39-cp39-linux_aarch64.whl; platform_machine == 'aarch64'
-openvino-dev[tensorflow2] @ https://github.com/NateMeyer/openvino-wheels/releases/download/multi-arch_2022.3.1/openvino_dev-2022.3.1-1-py3-none-any.whl
+tensorflow
+openvino-dev>=2024.0.0

docker/main/requirements-wheels.txt

@@ -1,29 +1,32 @@
 click == 8.1.*
-Flask == 2.3.*
+Flask == 3.0.*
+Flask_Limiter == 3.7.*
 imutils == 0.5.*
-matplotlib == 3.7.*
+joserfc == 0.11.*
+markupsafe == 2.1.*
 mypy == 1.6.1
-numpy == 1.23.*
+numpy == 1.26.*
 onvif_zeep == 0.2.12
-opencv-python-headless == 4.7.0.*
-paho-mqtt == 1.6.*
+opencv-python-headless == 4.9.0.*
+paho-mqtt == 2.1.*
+pandas == 2.2.*
 peewee == 3.17.*
 peewee_migrate == 1.12.*
 psutil == 5.9.*
-pydantic == 1.10.*
+pydantic == 2.7.*
 git+https://github.com/fbcotter/py3nvml#egg=py3nvml
 PyYAML == 6.0.*
-pytz == 2023.3.post1
+pytz == 2024.1
+pyzmq == 26.0.*
 ruamel.yaml == 0.18.*
 tzlocal == 5.2
 types-PyYAML == 6.0.*
-requests == 2.31.*
-types-requests == 2.31.*
-scipy == 1.11.*
+requests == 2.32.*
+types-requests == 2.32.*
+scipy == 1.13.*
 norfair == 2.2.*
 setproctitle == 1.3.*
 ws4py == 0.5.*
 unidecode == 1.3.*
-# Openvino Library - Custom built with MYRIAD support
-openvino @ https://github.com/NateMeyer/openvino-wheels/releases/download/multi-arch_2022.3.1/openvino-2022.3.1-1-cp39-cp39-manylinux_2_31_x86_64.whl; platform_machine == 'x86_64'
-openvino @ https://github.com/NateMeyer/openvino-wheels/releases/download/multi-arch_2022.3.1/openvino-2022.3.1-1-cp39-cp39-linux_aarch64.whl; platform_machine == 'aarch64'
+onnxruntime == 1.18.*
+openvino == 2024.1.*

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/consumer-for

@@ -0,0 +1 @@
+certsync

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/pipeline-name

@@ -0,0 +1 @@
+certsync-pipeline

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/run

@@ -0,0 +1,4 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+
+exec logutil-service /dev/shm/logs/certsync

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/type

@@ -0,0 +1 @@
+longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/finish

@@ -0,0 +1,30 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Take down the S6 supervision tree when the service fails
+
+set -o errexit -o nounset -o pipefail
+
+# Logs should be sent to stdout so that s6 can collect them
+
+declare exit_code_container
+exit_code_container=$(cat /run/s6-linux-init-container-results/exitcode)
+readonly exit_code_container
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+readonly service="CERTSYNC"
+
+echo "[INFO] Service ${service} exited with code ${exit_code_service} (by signal ${exit_code_signal})"
+
+if [[ "${exit_code_service}" -eq 256 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo $((128 + exit_code_signal)) >/run/s6-linux-init-container-results/exitcode
+  fi
+  if [[ "${exit_code_signal}" -eq 15 ]]; then
+    exec /run/s6/basedir/bin/halt
+  fi
+elif [[ "${exit_code_service}" -ne 0 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo "${exit_code_service}" >/run/s6-linux-init-container-results/exitcode
+  fi
+  exec /run/s6/basedir/bin/halt
+fi

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/producer-for

@@ -0,0 +1 @@
+certsync-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/run

@@ -0,0 +1,58 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Start the CERTSYNC service
+
+set -o errexit -o nounset -o pipefail
+
+# Logs should be sent to stdout so that s6 can collect them
+
+echo "[INFO] Starting certsync..."
+
+lefile="/etc/letsencrypt/live/frigate/fullchain.pem"
+
+tls_enabled=`python3 /usr/local/nginx/get_tls_settings.py | jq -r .enabled`
+
+while true
+do
+    if [[ "$tls_enabled" == 'false' ]]; then
+        sleep 9999
+        continue
+    fi
+
+    if [ ! -e $lefile ]
+    then
+        echo "[ERROR] TLS certificate does not exist: $lefile"
+    fi
+
+    leprint=`openssl x509 -in $lefile -fingerprint -noout 2>&1 || echo 'failed'`
+
+    case "$leprint" in
+        *Fingerprint*)
+            ;;
+        *)
+            echo "[ERROR] Missing fingerprint from $lefile"
+            ;;
+    esac
+
+    liveprint=`echo | openssl s_client -showcerts -connect 127.0.0.1:8971 2>&1 | openssl x509 -fingerprint 2>&1 | grep -i fingerprint  || echo 'failed'`
+
+    case "$liveprint" in
+        *Fingerprint*)
+            ;;
+        *)
+            echo "[ERROR] Missing fingerprint from current nginx TLS cert"
+            ;;
+    esac
+
+    if [[ "$leprint" != "failed" && "$liveprint" != "failed" && "$leprint" != "$liveprint" ]]
+    then
+        echo "[INFO] Reloading nginx to refresh TLS certificate"
+        echo "$lefile: $leprint"
+        /usr/local/nginx/sbin/nginx -s reload
+    fi
+
+    sleep 60
+
+done
+
+exit 0

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/timeout-kill

@@ -0,0 +1 @@
+30000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/type

@@ -0,0 +1 @@
+longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/run

@@ -16,8 +16,8 @@ function migrate_db_path() {
     if [[ -f "${config_file_yaml}" ]]; then
         config_file="${config_file_yaml}"
     elif [[ ! -f "${config_file}" ]]; then
-        echo "[ERROR] Frigate config file not found"
-        return 1
+        # Frigate will create the config file on startup
+        return 0
     fi
     unset config_file_yaml
 

docker/main/rootfs/etc/s6-overlay/s6-rc.d/log-prepare/run

@@ -4,7 +4,7 @@
 
 set -o errexit -o nounset -o pipefail
 
-dirs=(/dev/shm/logs/frigate /dev/shm/logs/go2rtc /dev/shm/logs/nginx)
+dirs=(/dev/shm/logs/frigate /dev/shm/logs/go2rtc /dev/shm/logs/nginx /dev/shm/logs/certsync)
 
 mkdir -p "${dirs[@]}"
 chown nobody:nogroup "${dirs[@]}"

docker/main/rootfs/etc/s6-overlay/s6-rc.d/nginx/data/check

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+set -e
+
+# Wait for PID file to exist.
+while ! test -f /run/nginx.pid; do sleep 1; done

docker/main/rootfs/etc/s6-overlay/s6-rc.d/nginx/notification-fd

@@ -0,0 +1 @@
+3

docker/main/rootfs/etc/s6-overlay/s6-rc.d/nginx/run

@@ -8,6 +8,84 @@ set -o errexit -o nounset -o pipefail
 
 echo "[INFO] Starting NGINX..."
 
+# Taken from https://github.com/felipecrs/cgroup-scripts/commits/master/get_cpus.sh
+function get_cpus() {
+    local quota=""
+    local period=""
+
+    if [ -f /sys/fs/cgroup/cgroup.controllers ]; then
+        if [ -f /sys/fs/cgroup/cpu.max ]; then
+            read -r quota period </sys/fs/cgroup/cpu.max
+            if [ "$quota" = "max" ]; then
+                quota=""
+                period=""
+            fi
+        else
+            echo "[WARN] /sys/fs/cgroup/cpu.max not found. Falling back to /proc/cpuinfo." >&2
+        fi
+    else
+        if [ -f /sys/fs/cgroup/cpu/cpu.cfs_quota_us ] && [ -f /sys/fs/cgroup/cpu/cpu.cfs_period_us ]; then
+            quota=$(cat /sys/fs/cgroup/cpu/cpu.cfs_quota_us)
+            period=$(cat /sys/fs/cgroup/cpu/cpu.cfs_period_us)
+
+            if [ "$quota" = "-1" ]; then
+                quota=""
+                period=""
+            fi
+        else
+            echo "[WARN] /sys/fs/cgroup/cpu/cpu.cfs_quota_us or /sys/fs/cgroup/cpu/cpu.cfs_period_us not found. Falling back to /proc/cpuinfo." >&2
+        fi
+    fi
+
+    local cpus
+    if [ "${period}" != "0" ] && [ -n "${quota}" ] && [ -n "${period}" ]; then
+        cpus=$((quota / period))
+        if [ "$cpus" -eq 0 ]; then
+            cpus=1
+        fi
+    else
+        cpus=$(grep -c ^processor /proc/cpuinfo)
+    fi
+
+    printf '%s' "$cpus"
+}
+
+function set_worker_processes() {
+    # Capture number of assigned CPUs to calculate worker processes
+    local cpus
+
+    cpus=$(get_cpus)
+    if [[ "${cpus}" -gt 4 ]]; then
+        cpus=4
+    fi
+
+    # we need to catch any errors because sed will fail if user has bind mounted a custom nginx file
+    sed -i "s/worker_processes auto;/worker_processes ${cpus};/" /usr/local/nginx/conf/nginx.conf || true
+}
+
+set_worker_processes
+
+# ensure the directory for ACME challenges exists
+mkdir -p /etc/letsencrypt/www
+
+# Create self signed certs if needed
+letsencrypt_path=/etc/letsencrypt/live/frigate
+mkdir -p $letsencrypt_path
+
+if [ ! \( -f "$letsencrypt_path/privkey.pem" -a -f "$letsencrypt_path/fullchain.pem" \) ]; then
+    echo "[INFO] No TLS certificate found. Generating a self signed certificate..."
+    openssl req -new -newkey rsa:4096 -days 365 -nodes -x509 \
+        -subj "/O=FRIGATE DEFAULT CERT/CN=*" \
+        -keyout "$letsencrypt_path/privkey.pem" -out "$letsencrypt_path/fullchain.pem" 2>/dev/null
+fi
+
+# build templates for optional TLS support
+python3 /usr/local/nginx/get_tls_settings.py | \
+    tempio  -template /usr/local/nginx/templates/listen.gotmpl \
+            -out /usr/local/nginx/conf/listen.conf
+
 # Replace the bash process with the NGINX process, redirecting stderr to stdout
 exec 2>&1
-exec nginx
+exec \
+    s6-notifyoncheck -t 30000 -n 1 \
+    nginx

docker/main/rootfs/labelmap/coco-80.txt

@@ -0,0 +1,80 @@
+0  person
+1  bicycle
+2  car
+3  motorcycle
+4  airplane
+5  car
+6  train
+7  car
+8  boat
+9  traffic light
+10  fire hydrant
+11  stop sign
+12  parking meter
+13  bench
+14  bird
+15  cat
+16  dog
+17  horse
+18  sheep
+19  cow
+20  elephant
+21  bear
+22  zebra
+23  giraffe
+24  backpack
+25  umbrella
+26  handbag
+27  tie
+28  suitcase
+29  frisbee
+30  skis
+31  snowboard
+32  sports ball
+33  kite
+34  baseball bat
+35  baseball glove
+36  skateboard
+37  surfboard
+38  tennis racket
+39  bottle
+40  wine glass
+41  cup
+42  fork
+43  knife
+44  spoon
+45  bowl
+46  banana
+47  apple
+48  sandwich
+49  orange
+50  broccoli
+51  carrot
+52  hot dog
+53  pizza
+54  donut
+55  cake
+56  chair
+57  couch
+58  potted plant
+59  bed
+60  dining table
+61  toilet
+62  tv
+63  laptop
+64  mouse
+65  remote
+66  keyboard
+67  cell phone
+68  microwave
+69  oven
+70  toaster
+71  sink
+72  refrigerator
+73  book
+74  clock
+75  vase
+76  scissors
+77  teddy bear
+78  hair drier
+79  toothbrush

docker/main/rootfs/labelmap/coco.txt

@@ -0,0 +1,91 @@
+0  person
+1  bicycle
+2  car
+3  motorcycle
+4  airplane
+5  bus
+6  train
+7  car
+8  boat
+9  traffic light
+10  fire hydrant
+11  street sign
+12  stop sign
+13  parking meter
+14  bench
+15  bird
+16  cat
+17  dog
+18  horse
+19  sheep
+20  cow
+21  elephant
+22  bear
+23  zebra
+24  giraffe
+25  hat
+26  backpack
+27  umbrella
+28  shoe
+29  eye glasses
+30  handbag
+31  tie
+32  suitcase
+33  frisbee
+34  skis
+35  snowboard
+36  sports ball
+37  kite
+38  baseball bat
+39  baseball glove
+40  skateboard
+41  surfboard
+42  tennis racket
+43  bottle
+44  plate
+45  wine glass
+46  cup
+47  fork
+48  knife
+49  spoon
+50  bowl
+51  banana
+52  apple
+53  sandwich
+54  orange
+55  broccoli
+56  carrot
+57  hot dog
+58  pizza
+59  donut
+60  cake
+61  chair
+62  couch
+63  potted plant
+64  bed
+65  mirror
+66  dining table
+67  window
+68  desk
+69  toilet
+70  door
+71  tv
+72  laptop
+73  mouse
+74  remote
+75  keyboard
+76  cell phone
+77  microwave
+78  oven
+79  toaster
+80  sink
+81  refrigerator
+82  blender
+83  book
+84  clock
+85  vase
+86  scissors
+87  teddy bear
+88  hair drier
+89  toothbrush
+90  hair brush

docker/main/rootfs/usr/local/go2rtc/create_config.py

@@ -21,9 +21,9 @@ FRIGATE_ENV_VARS = {k: v for k, v in os.environ.items() if k.startswith("FRIGATE
 if os.path.isdir("/run/secrets"):
     for secret_file in os.listdir("/run/secrets"):
         if secret_file.startswith("FRIGATE_"):
-            FRIGATE_ENV_VARS[secret_file] = Path(
-                os.path.join("/run/secrets", secret_file)
-            ).read_text()
+            FRIGATE_ENV_VARS[secret_file] = (
+                Path(os.path.join("/run/secrets", secret_file)).read_text().strip()
+            )
 
 config_file = os.environ.get("CONFIG_FILE", "/config/config.yml")
 
@@ -32,13 +32,16 @@ config_file_yaml = config_file.replace(".yml", ".yaml")
 if os.path.isfile(config_file_yaml):
     config_file = config_file_yaml
 
-with open(config_file) as f:
-    raw_config = f.read()
+try:
+    with open(config_file) as f:
+        raw_config = f.read()
 
-if config_file.endswith((".yaml", ".yml")):
-    config: dict[str, any] = yaml.safe_load(raw_config)
-elif config_file.endswith(".json"):
-    config: dict[str, any] = json.loads(raw_config)
+    if config_file.endswith((".yaml", ".yml")):
+        config: dict[str, any] = yaml.safe_load(raw_config)
+    elif config_file.endswith(".json"):
+        config: dict[str, any] = json.loads(raw_config)
+except FileNotFoundError:
+    config: dict[str, any] = {}
 
 go2rtc_config: dict[str, any] = config.get("go2rtc", {})
 
@@ -109,23 +112,9 @@ if int(os.environ["LIBAVFORMAT_VERSION_MAJOR"]) < 59:
             "rtsp": "-fflags nobuffer -flags low_delay -stimeout 5000000 -user_agent go2rtc/ffmpeg -rtsp_transport tcp -i {input}"
         }
     elif go2rtc_config["ffmpeg"].get("rtsp") is None:
-        go2rtc_config["ffmpeg"][
-            "rtsp"
-        ] = "-fflags nobuffer -flags low_delay -stimeout 5000000 -user_agent go2rtc/ffmpeg -rtsp_transport tcp -i {input}"
-
-# add hardware acceleration presets for rockchip devices
-# may be removed if frigate uses a go2rtc version that includes these presets
-if go2rtc_config.get("ffmpeg") is None:
-    go2rtc_config["ffmpeg"] = {
-        "h264/rk": "-c:v h264_rkmpp_encoder -g 50 -bf 0",
-        "h265/rk": "-c:v hevc_rkmpp_encoder -g 50 -bf 0",
-    }
-else:
-    if go2rtc_config["ffmpeg"].get("h264/rk") is None:
-        go2rtc_config["ffmpeg"]["h264/rk"] = "-c:v h264_rkmpp_encoder -g 50 -bf 0"
-
-    if go2rtc_config["ffmpeg"].get("h265/rk") is None:
-        go2rtc_config["ffmpeg"]["h265/rk"] = "-c:v hevc_rkmpp_encoder -g 50 -bf 0"
+        go2rtc_config["ffmpeg"]["rtsp"] = (
+            "-fflags nobuffer -flags low_delay -stimeout 5000000 -user_agent go2rtc/ffmpeg -rtsp_transport tcp -i {input}"
+        )
 
 for name in go2rtc_config.get("streams", {}):
     stream = go2rtc_config["streams"][name]

docker/main/rootfs/usr/local/nginx/conf/auth_location.conf

@@ -0,0 +1,43 @@
+set $upstream_auth http://127.0.0.1:5001/auth;
+
+## Virtual endpoint created by nginx to forward auth requests.
+location /auth {
+    ## Essential Proxy Configuration
+    internal;
+    proxy_pass $upstream_auth;
+
+    ## Headers
+
+    # First strip out all the request headers
+    # Note: This is important to ensure that upgrade requests for secure
+    #       websockets dont cause the backend to fail
+    proxy_pass_request_headers off;
+    # Pass info about the request
+    proxy_set_header X-Original-Method $request_method;
+    proxy_set_header X-Original-URL $scheme://$http_host$request_uri;
+    proxy_set_header X-Server-Port $server_port;
+    proxy_set_header Content-Length "";
+    # Pass along auth related info
+    proxy_set_header Authorization $http_authorization;
+    proxy_set_header Cookie $http_cookie;
+    proxy_set_header X-CSRF-TOKEN "1";
+
+    # include headers from common auth proxies
+    include proxy_trusted_headers.conf;
+
+    ## Basic Proxy Configuration
+    proxy_pass_request_body off;
+    proxy_next_upstream error timeout invalid_header http_500 http_502 http_503; # Timeout if the real server is dead
+    proxy_redirect http:// $scheme://;
+    proxy_http_version 1.1;
+    proxy_cache_bypass $cookie_session;
+    proxy_no_cache $cookie_session;
+    proxy_buffers 4 32k;
+    client_body_buffer_size 128k;
+
+    ## Advanced Proxy Configuration
+    send_timeout 5m;
+    proxy_read_timeout 240;
+    proxy_send_timeout 240;
+    proxy_connect_timeout 240;
+}

docker/main/rootfs/usr/local/nginx/conf/auth_request.conf

@@ -0,0 +1,22 @@
+## Send a subrequest to verify if the user is authenticated and has permission to access the resource.
+auth_request /auth;
+
+## Save the upstream metadata response headers from Authelia to variables.
+auth_request_set $user $upstream_http_remote_user;
+auth_request_set $groups $upstream_http_remote_groups;
+auth_request_set $name $upstream_http_remote_name;
+auth_request_set $email $upstream_http_remote_email;
+
+## Inject the metadata response headers from the variables into the request made to the backend.
+proxy_set_header Remote-User $user;
+proxy_set_header Remote-Groups $groups;
+proxy_set_header Remote-Email $email;
+proxy_set_header Remote-Name $name;
+
+## Refresh the cookie as needed
+auth_request_set $auth_cookie $upstream_http_set_cookie;
+add_header Set-Cookie $auth_cookie;
+
+## Pass the location header back up if it exists
+auth_request_set $redirection_url $upstream_http_location;
+add_header Location $redirection_url;

docker/main/rootfs/usr/local/nginx/conf/go2rtc_upstream.conf

@@ -0,0 +1,4 @@
+upstream go2rtc {
+    server 127.0.0.1:1984;
+    keepalive 1024;
+}

docker/main/rootfs/usr/local/nginx/conf/nginx.conf

@@ -10,6 +10,8 @@ events {
 }
 
 http {
+    map_hash_bucket_size 256;
+
     include mime.types;
     default_type application/octet-stream;
 
@@ -54,13 +56,10 @@ http {
         keepalive 1024;
     }
 
-    upstream go2rtc {
-        server 127.0.0.1:1984;
-        keepalive 1024;
-    }
+    include go2rtc_upstream.conf;
 
     server {
-        listen 5000;
+        include listen.conf;
 
         # vod settings
         vod_base_url '';
@@ -93,7 +92,10 @@ http {
         gzip on;
         gzip_types application/vnd.apple.mpegurl;
 
+        include auth_location.conf;
+
         location /vod/ {
+            include auth_request.conf;
             aio threads;
             vod hls;
 
@@ -105,6 +107,7 @@ http {
         }
 
         location /stream/ {
+            include auth_request.conf;
             add_header Cache-Control "no-store";
             expires off;
 
@@ -119,12 +122,14 @@ http {
         }
 
         location /clips/ {
-
+            include auth_request.conf;
             types {
                 video/mp4 mp4;
                 image/jpeg jpg;
             }
 
+            expires 7d;
+            add_header Cache-Control "public";
             autoindex on;
             root /media/frigate;
         }
@@ -135,6 +140,7 @@ http {
         }
 
         location /recordings/ {
+            include auth_request.conf;
             types {
                 video/mp4 mp4;
             }
@@ -145,6 +151,7 @@ http {
         }
 
         location /exports/ {
+            include auth_request.conf;
             types {
                 video/mp4 mp4;
             }
@@ -155,17 +162,20 @@ http {
         }
 
         location /ws {
+            include auth_request.conf;
             proxy_pass http://mqtt_ws/;
             include proxy.conf;
         }
 
         location /live/jsmpeg/ {
+            include auth_request.conf;
             proxy_pass http://jsmpeg/;
             include proxy.conf;
         }
 
         # frigate lovelace card uses this path
         location /live/mse/api/ws {
+            include auth_request.conf;
             limit_except GET {
                 deny  all;
             }
@@ -174,6 +184,7 @@ http {
         }
 
         location /live/webrtc/api/ws {
+            include auth_request.conf;
             limit_except GET {
                 deny  all;
             }
@@ -183,6 +194,7 @@ http {
 
         # pass through go2rtc player
         location /live/webrtc/webrtc.html {
+            include auth_request.conf;
             limit_except GET {
                 deny  all;
             }
@@ -192,6 +204,7 @@ http {
 
         # frontend uses this to fetch the version
         location /api/go2rtc/api {
+            include auth_request.conf;
             limit_except GET {
                 deny  all;
             }
@@ -201,6 +214,7 @@ http {
 
         # integration uses this to add webrtc candidate
         location /api/go2rtc/webrtc {
+            include auth_request.conf;
             limit_except POST {
                 deny  all;
             }
@@ -208,13 +222,15 @@ http {
             include proxy.conf;
         }
 
-        location ~* /api/.*\.(jpg|jpeg|png)$ {
+        location ~* /api/.*\.(jpg|jpeg|png|webp|gif)$ {
+            include auth_request.conf;
             rewrite ^/api/(.*)$ $1 break;
             proxy_pass http://frigate_api;
             include proxy.conf;
         }
 
         location /api/ {
+            include auth_request.conf;
             add_header Cache-Control "no-store";
             expires off;
             proxy_pass http://frigate_api/;
@@ -229,27 +245,38 @@ http {
             add_header X-Cache-Status $upstream_cache_status;
 
             location /api/vod/ {
+                include auth_request.conf;
                 proxy_pass http://frigate_api/vod/;
                 include proxy.conf;
                 proxy_cache off;
             }
 
+            location /api/login {
+                auth_request off;
+                rewrite ^/api(/.*)$ $1 break;
+                proxy_pass http://frigate_api;
+                include proxy.conf;
+            }
+
             location /api/stats {
+                include auth_request.conf;
                 access_log off;
-                rewrite ^/api/(.*)$ $1 break;
+                rewrite ^/api(/.*)$ $1 break;
                 proxy_pass http://frigate_api;
                 include proxy.conf;
             }
 
             location /api/version {
+                include auth_request.conf;
                 access_log off;
-                rewrite ^/api/(.*)$ $1 break;
+                rewrite ^/api(/.*)$ $1 break;
                 proxy_pass http://frigate_api;
                 include proxy.conf;
             }
         }
 
         location / {
+            # do not require auth for static assets
             add_header Cache-Control "no-store";
             expires off;
 
@@ -271,22 +298,7 @@ http {
             sub_filter_once off;
 
             root /opt/frigate/web;
-            try_files $uri $uri/ /index.html;
-        }
-    }
-}
-
-rtmp {
-    server {
-        listen 1935;
-        chunk_size 4096;
-        allow publish 127.0.0.1;
-        deny publish all;
-        allow play all;
-        application live {
-            live on;
-            record off;
-            meta copy;
+            try_files $uri $uri.html $uri/ /index.html;
         }
     }
 }

docker/main/rootfs/usr/local/nginx/conf/proxy.conf

@@ -1,4 +1,26 @@
-proxy_http_version 1.1;
+## Headers
+proxy_set_header Host $host;
 proxy_set_header Upgrade $http_upgrade;
 proxy_set_header Connection "Upgrade";
-proxy_set_header Host $host;
+proxy_set_header X-Original-URL $scheme://$http_host$request_uri;
+proxy_set_header X-Forwarded-Proto $scheme;
+proxy_set_header X-Forwarded-Host $http_host;
+proxy_set_header X-Forwarded-URI $request_uri;
+proxy_set_header X-Forwarded-Ssl on;
+proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+proxy_set_header X-Real-IP $remote_addr;
+
+## Basic Proxy Configuration
+client_body_buffer_size 128k;
+proxy_next_upstream error timeout invalid_header http_500 http_502 http_503; ## Timeout if the real server is dead.
+proxy_redirect  http://  $scheme://;
+proxy_http_version 1.1;
+proxy_cache_bypass $cookie_session;
+proxy_no_cache $cookie_session;
+proxy_buffers 64 256k;
+
+## Advanced Proxy Configuration
+send_timeout 5m;
+proxy_read_timeout 360;
+proxy_send_timeout 360;
+proxy_connect_timeout 360;

docker/main/rootfs/usr/local/nginx/conf/proxy_trusted_headers.conf

@@ -0,0 +1,25 @@
+# Header used to validate reverse proxy trust
+proxy_set_header X-Proxy-Secret $http_x_proxy_secret;
+
+# these headers will be copied to the /auth request and are available
+# to be mapped in the config to Frigate's remote-user header
+
+# List of headers sent by common authentication proxies:
+# - Authelia
+# - Traefik forward auth
+# - oauth2_proxy
+# - Authentik
+
+proxy_set_header Remote-User $http_remote_user;
+proxy_set_header Remote-Groups $http_remote_groups;
+proxy_set_header Remote-Email $http_remote_email;
+proxy_set_header Remote-Name $http_remote_name;
+proxy_set_header X-Forwarded-User $http_x_forwarded_user;
+proxy_set_header X-Forwarded-Groups $http_x_forwarded_groups;
+proxy_set_header X-Forwarded-Email $http_x_forwarded_email;
+proxy_set_header X-Forwarded-Preferred-Username $http_x_forwarded_preferred_username;
+proxy_set_header X-authentik-username $http_x_authentik_username;
+proxy_set_header X-authentik-groups $http_x_authentik_groups;
+proxy_set_header X-authentik-email $http_x_authentik_email;
+proxy_set_header X-authentik-name $http_x_authentik_name;
+proxy_set_header X-authentik-uid $http_x_authentik_uid;

docker/main/rootfs/usr/local/nginx/get_tls_settings.py

@@ -0,0 +1,28 @@
+"""Prints the tls config as json to stdout."""
+
+import json
+import os
+
+import yaml
+
+config_file = os.environ.get("CONFIG_FILE", "/config/config.yml")
+
+# Check if we can use .yaml instead of .yml
+config_file_yaml = config_file.replace(".yml", ".yaml")
+if os.path.isfile(config_file_yaml):
+    config_file = config_file_yaml
+
+try:
+    with open(config_file) as f:
+        raw_config = f.read()
+
+    if config_file.endswith((".yaml", ".yml")):
+        config: dict[str, any] = yaml.safe_load(raw_config)
+    elif config_file.endswith(".json"):
+        config: dict[str, any] = json.loads(raw_config)
+except FileNotFoundError:
+    config: dict[str, any] = {}
+
+tls_config: dict[str, any] = config.get("tls", {"enabled": True})
+
+print(json.dumps(tls_config))

docker/main/rootfs/usr/local/nginx/templates/listen.gotmpl

@@ -0,0 +1,33 @@
+# intended for internal traffic, not protected by auth
+listen 5000;
+
+{{ if not .enabled }}
+# intended for external traffic, protected by auth
+listen 8971;
+{{ else }}
+# intended for external traffic, protected by auth
+listen 8971 ssl;
+
+ssl_certificate /etc/letsencrypt/live/frigate/fullchain.pem;
+ssl_certificate_key /etc/letsencrypt/live/frigate/privkey.pem;
+
+# generated 2024-06-01, Mozilla Guideline v5.7, nginx 1.25.3, OpenSSL 1.1.1w, modern configuration, no OCSP
+# https://ssl-config.mozilla.org/#server=nginx&version=1.25.3&config=modern&openssl=1.1.1w&ocsp=false&guideline=5.7
+ssl_session_timeout 1d;
+ssl_session_cache shared:MozSSL:10m;  # about 40000 sessions
+ssl_session_tickets off;
+
+# modern configuration
+ssl_protocols TLSv1.3;
+ssl_prefer_server_ciphers off;
+
+# HSTS (ngx_http_headers_module is required) (63072000 seconds)
+add_header Strict-Transport-Security "max-age=63072000" always;
+
+# ACME challenge location
+location /.well-known/acme-challenge/ {
+    default_type "text/plain";
+    root /etc/letsencrypt/www;
+}
+{{ end }}
+

docker/rockchip/Dockerfile

@@ -9,24 +9,18 @@ COPY docker/rockchip/requirements-wheels-rk.txt /requirements-wheels-rk.txt
 RUN sed -i "/https:\/\//d" /requirements-wheels.txt
 RUN pip3 wheel --wheel-dir=/rk-wheels -c /requirements-wheels.txt -r /requirements-wheels-rk.txt
 
-FROM deps AS rk-deps
+FROM deps AS rk-frigate
 ARG TARGETARCH
 
-RUN --mount=type=bind,from=rk-wheels,source=/rk-wheels,target=/deps/rk-wheels \ 
-    pip3 install -U /deps/rk-wheels/*.whl 
+RUN --mount=type=bind,from=rk-wheels,source=/rk-wheels,target=/deps/rk-wheels \
+    pip3 install -U /deps/rk-wheels/*.whl
 
 WORKDIR /opt/frigate/
 COPY --from=rootfs / /
 
-ADD https://github.com/MarcA711/rknpu2/releases/download/v1.5.2/librknnrt_rk356x.so /usr/lib/
-ADD https://github.com/MarcA711/rknpu2/releases/download/v1.5.2/librknnrt_rk3588.so /usr/lib/
-
-ADD https://github.com/MarcA711/rknn-models/releases/download/v1.5.2-rk3562/yolov8n-320x320-rk3562.rknn /models/rknn/
-ADD https://github.com/MarcA711/rknn-models/releases/download/v1.5.2-rk3566/yolov8n-320x320-rk3566.rknn /models/rknn/
-ADD https://github.com/MarcA711/rknn-models/releases/download/v1.5.2-rk3568/yolov8n-320x320-rk3568.rknn /models/rknn/
-ADD https://github.com/MarcA711/rknn-models/releases/download/v1.5.2-rk3588/yolov8n-320x320-rk3588.rknn /models/rknn/
+ADD https://github.com/MarcA711/rknn-toolkit2/releases/download/v2.0.0/librknnrt.so /usr/lib/
 
 RUN rm -rf /usr/lib/btbn-ffmpeg/bin/ffmpeg
 RUN rm -rf /usr/lib/btbn-ffmpeg/bin/ffprobe
-ADD --chmod=111 https://github.com/MarcA711/Rockchip-FFmpeg-Builds/releases/download/6.0-1/ffmpeg /usr/lib/btbn-ffmpeg/bin/
-ADD --chmod=111 https://github.com/MarcA711/Rockchip-FFmpeg-Builds/releases/download/6.0-1/ffprobe /usr/lib/btbn-ffmpeg/bin/
+ADD --chmod=111 https://github.com/MarcA711/Rockchip-FFmpeg-Builds/releases/download/6.1-5/ffmpeg /usr/lib/btbn-ffmpeg/bin/
+ADD --chmod=111 https://github.com/MarcA711/Rockchip-FFmpeg-Builds/releases/download/6.1-5/ffprobe /usr/lib/btbn-ffmpeg/bin/

docker/rockchip/requirements-wheels-rk.txt

@@ -1,2 +1 @@
-hide-warnings == 0.17
-rknn-toolkit-lite2 @ https://github.com/MarcA711/rknn-toolkit2/releases/download/v1.5.2/rknn_toolkit_lite2-1.5.2-cp39-cp39-linux_aarch64.whl
+rknn-toolkit-lite2 @ https://github.com/MarcA711/rknn-toolkit2/releases/download/v2.0.0/rknn_toolkit_lite2-2.0.0b0-cp39-cp39-linux_aarch64.whl

docker/rockchip/rk.hcl

@@ -1,9 +1,3 @@
-target wget {
-  dockerfile = "docker/main/Dockerfile"
-  platforms = ["linux/arm64"]
-  target = "wget"
-}
-
 target wheels {
   dockerfile = "docker/main/Dockerfile"
   platforms = ["linux/arm64"]
@@ -25,7 +19,6 @@ target rootfs {
 target rk {
   dockerfile = "docker/rockchip/Dockerfile"
   contexts = {
-    wget = "target:wget",
     wheels = "target:wheels",
     deps = "target:deps",
     rootfs = "target:rootfs"

docker/rocm/Dockerfile

@@ -0,0 +1,106 @@
+# syntax=docker/dockerfile:1.4
+
+# https://askubuntu.com/questions/972516/debian-frontend-environment-variable
+ARG DEBIAN_FRONTEND=noninteractive
+ARG ROCM=5.7.3
+ARG AMDGPU=gfx900
+ARG HSA_OVERRIDE_GFX_VERSION
+ARG HSA_OVERRIDE
+
+#######################################################################
+FROM ubuntu:focal as rocm
+
+ARG ROCM
+
+RUN apt-get update && apt-get -y upgrade
+RUN apt-get -y install gnupg wget
+
+RUN mkdir --parents --mode=0755 /etc/apt/keyrings
+
+RUN wget https://repo.radeon.com/rocm/rocm.gpg.key -O - | gpg --dearmor | tee /etc/apt/keyrings/rocm.gpg > /dev/null
+COPY docker/rocm/rocm.list /etc/apt/sources.list.d/
+COPY docker/rocm/rocm-pin-600 /etc/apt/preferences.d/
+
+RUN apt-get update
+
+RUN apt-get -y install --no-install-recommends migraphx
+RUN apt-get -y install --no-install-recommends migraphx-dev
+
+RUN mkdir -p /opt/rocm-dist/opt/rocm-$ROCM/lib
+RUN cd /opt/rocm-$ROCM/lib && cp -dpr libMIOpen*.so* libamd*.so* libhip*.so* libhsa*.so* libmigraphx*.so* librocm*.so* librocblas*.so* /opt/rocm-dist/opt/rocm-$ROCM/lib/
+RUN cd /opt/rocm-dist/opt/ && ln -s rocm-$ROCM rocm
+
+RUN mkdir -p /opt/rocm-dist/etc/ld.so.conf.d/
+RUN echo /opt/rocm/lib|tee /opt/rocm-dist/etc/ld.so.conf.d/rocm.conf
+
+#######################################################################
+FROM --platform=linux/amd64 debian:11 as debian-base
+
+RUN apt-get update && apt-get -y upgrade
+RUN apt-get -y install --no-install-recommends libelf1 libdrm2 libdrm-amdgpu1 libnuma1 kmod
+
+RUN apt-get -y install python3
+
+#######################################################################
+# ROCm does not come with migraphx wrappers for python 3.9, so we build it here
+FROM debian-base as debian-build
+
+ARG ROCM
+
+COPY --from=rocm /opt/rocm-$ROCM /opt/rocm-$ROCM
+RUN ln -s /opt/rocm-$ROCM /opt/rocm
+
+RUN apt-get -y install g++ cmake
+RUN apt-get -y install python3-pybind11 python3.9-distutils python3-dev
+
+WORKDIR /opt/build
+
+COPY docker/rocm/migraphx .
+
+RUN mkdir build && cd build && cmake .. && make install
+
+#######################################################################
+FROM deps AS deps-prelim
+
+# need this to install libnuma1
+RUN apt-get update
+# no ugprade?!?!
+RUN apt-get -y install libnuma1
+
+WORKDIR /opt/frigate/
+COPY --from=rootfs / /
+COPY docker/rocm/rootfs/ /
+
+#######################################################################
+FROM scratch AS rocm-dist
+
+ARG ROCM
+ARG AMDGPU
+
+COPY --from=rocm /opt/rocm-$ROCM/bin/rocminfo /opt/rocm-$ROCM/bin/migraphx-driver /opt/rocm-$ROCM/bin/
+COPY --from=rocm /opt/rocm-$ROCM/share/miopen/db/*$AMDGPU* /opt/rocm-$ROCM/share/miopen/db/
+COPY --from=rocm /opt/rocm-$ROCM/lib/rocblas/library/*$AMDGPU* /opt/rocm-$ROCM/lib/rocblas/library/
+COPY --from=rocm /opt/rocm-dist/ /
+COPY --from=debian-build /opt/rocm/lib/migraphx.cpython-39-x86_64-linux-gnu.so /opt/rocm-$ROCM/lib/
+
+#######################################################################
+FROM deps-prelim AS rocm-prelim-hsa-override0
+
+ENV HSA_ENABLE_SDMA=0
+
+COPY --from=rocm-dist / /
+
+RUN ldconfig
+
+#######################################################################
+FROM rocm-prelim-hsa-override0 as rocm-prelim-hsa-override1
+
+ARG HSA_OVERRIDE_GFX_VERSION
+ENV HSA_OVERRIDE_GFX_VERSION=$HSA_OVERRIDE_GFX_VERSION
+
+#######################################################################
+FROM rocm-prelim-hsa-override$HSA_OVERRIDE as rocm-deps
+
+# Request yolov8 download at startup
+ENV DOWNLOAD_YOLOV8=1
+

docker/rocm/migraphx/CMakeLists.txt

@@ -0,0 +1,26 @@
+
+cmake_minimum_required(VERSION 3.1)
+
+set(CMAKE_CXX_STANDARD 17)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
+set(CMAKE_CXX_EXTENSIONS OFF)
+
+if(NOT CMAKE_BUILD_TYPE)
+  set(CMAKE_BUILD_TYPE Release)
+endif()
+
+SET(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
+
+project(migraphx_py)
+
+include_directories(/opt/rocm/include)
+
+find_package(pybind11 REQUIRED)
+pybind11_add_module(migraphx migraphx_py.cpp)
+
+target_link_libraries(migraphx PRIVATE /opt/rocm/lib/libmigraphx.so /opt/rocm/lib/libmigraphx_tf.so /opt/rocm/lib/libmigraphx_onnx.so)
+
+install(TARGETS migraphx
+  COMPONENT python
+  LIBRARY DESTINATION /opt/rocm/lib
+)

docker/rocm/migraphx/migraphx_py.cpp

@@ -0,0 +1,582 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2015-2022 Advanced Micro Devices, Inc. All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <pybind11/pybind11.h>
+#include <pybind11/stl.h>
+#include <pybind11/numpy.h>
+#include <migraphx/program.hpp>
+#include <migraphx/instruction_ref.hpp>
+#include <migraphx/operation.hpp>
+#include <migraphx/quantization.hpp>
+#include <migraphx/generate.hpp>
+#include <migraphx/instruction.hpp>
+#include <migraphx/ref/target.hpp>
+#include <migraphx/stringutils.hpp>
+#include <migraphx/tf.hpp>
+#include <migraphx/onnx.hpp>
+#include <migraphx/load_save.hpp>
+#include <migraphx/register_target.hpp>
+#include <migraphx/json.hpp>
+#include <migraphx/make_op.hpp>
+#include <migraphx/op/common.hpp>
+
+#ifdef HAVE_GPU
+#include <migraphx/gpu/hip.hpp>
+#endif
+
+using half   = half_float::half;
+namespace py = pybind11;
+
+#ifdef __clang__
+#define MIGRAPHX_PUSH_UNUSED_WARNING \
+    _Pragma("clang diagnostic push") \
+        _Pragma("clang diagnostic ignored \"-Wused-but-marked-unused\"")
+#define MIGRAPHX_POP_WARNING _Pragma("clang diagnostic pop")
+#else
+#define MIGRAPHX_PUSH_UNUSED_WARNING
+#define MIGRAPHX_POP_WARNING
+#endif
+#define MIGRAPHX_PYBIND11_MODULE(...) \
+    MIGRAPHX_PUSH_UNUSED_WARNING      \
+    PYBIND11_MODULE(__VA_ARGS__)      \
+    MIGRAPHX_POP_WARNING
+
+#define MIGRAPHX_PYTHON_GENERATE_SHAPE_ENUM(x, t) .value(#x, migraphx::shape::type_t::x)
+namespace migraphx {
+
+migraphx::value to_value(py::kwargs kwargs);
+migraphx::value to_value(py::list lst);
+
+template <class T, class F>
+void visit_py(T x, F f)
+{
+    if(py::isinstance<py::kwargs>(x))
+    {
+        f(to_value(x.template cast<py::kwargs>()));
+    }
+    else if(py::isinstance<py::list>(x))
+    {
+        f(to_value(x.template cast<py::list>()));
+    }
+    else if(py::isinstance<py::bool_>(x))
+    {
+        f(x.template cast<bool>());
+    }
+    else if(py::isinstance<py::int_>(x) or py::hasattr(x, "__index__"))
+    {
+        f(x.template cast<int>());
+    }
+    else if(py::isinstance<py::float_>(x))
+    {
+        f(x.template cast<float>());
+    }
+    else if(py::isinstance<py::str>(x))
+    {
+        f(x.template cast<std::string>());
+    }
+    else if(py::isinstance<migraphx::shape::dynamic_dimension>(x))
+    {
+        f(migraphx::to_value(x.template cast<migraphx::shape::dynamic_dimension>()));
+    }
+    else
+    {
+        MIGRAPHX_THROW("VISIT_PY: Unsupported data type!");
+    }
+}
+
+migraphx::value to_value(py::list lst)
+{
+    migraphx::value v = migraphx::value::array{};
+    for(auto val : lst)
+    {
+        visit_py(val, [&](auto py_val) { v.push_back(py_val); });
+    }
+
+    return v;
+}
+
+migraphx::value to_value(py::kwargs kwargs)
+{
+    migraphx::value v = migraphx::value::object{};
+
+    for(auto arg : kwargs)
+    {
+        auto&& key = py::str(arg.first);
+        auto&& val = arg.second;
+        visit_py(val, [&](auto py_val) { v[key] = py_val; });
+    }
+    return v;
+}
+} // namespace migraphx
+
+namespace pybind11 {
+namespace detail {
+
+template <>
+struct npy_format_descriptor<half>
+{
+    static std::string format()
+    {
+        // following: https://docs.python.org/3/library/struct.html#format-characters
+        return "e";
+    }
+    static constexpr auto name() { return _("half"); }
+};
+
+} // namespace detail
+} // namespace pybind11
+
+template <class F>
+void visit_type(const migraphx::shape& s, F f)
+{
+    s.visit_type(f);
+}
+
+template <class T, class F>
+void visit(const migraphx::raw_data<T>& x, F f)
+{
+    x.visit(f);
+}
+
+template <class F>
+void visit_types(F f)
+{
+    migraphx::shape::visit_types(f);
+}
+
+template <class T>
+py::buffer_info to_buffer_info(T& x)
+{
+    migraphx::shape s = x.get_shape();
+    assert(s.type() != migraphx::shape::tuple_type);
+    if(s.dynamic())
+        MIGRAPHX_THROW("MIGRAPHX PYTHON: dynamic shape argument passed to to_buffer_info");
+    auto strides = s.strides();
+    std::transform(
+        strides.begin(), strides.end(), strides.begin(), [&](auto i) { return i * s.type_size(); });
+    py::buffer_info b;
+    visit_type(s, [&](auto as) {
+        // migraphx use int8_t data to store bool type, we need to
+        // explicitly specify the data type as bool for python
+        if(s.type() == migraphx::shape::bool_type)
+        {
+            b = py::buffer_info(x.data(),
+                                as.size(),
+                                py::format_descriptor<bool>::format(),
+                                s.ndim(),
+                                s.lens(),
+                                strides);
+        }
+        else
+        {
+            b = py::buffer_info(x.data(),
+                                as.size(),
+                                py::format_descriptor<decltype(as())>::format(),
+                                s.ndim(),
+                                s.lens(),
+                                strides);
+        }
+    });
+    return b;
+}
+
+migraphx::shape to_shape(const py::buffer_info& info)
+{
+    migraphx::shape::type_t t;
+    std::size_t n = 0;
+    visit_types([&](auto as) {
+        if(info.format == py::format_descriptor<decltype(as())>::format() or
+           (info.format == "l" and py::format_descriptor<decltype(as())>::format() == "q") or
+           (info.format == "L" and py::format_descriptor<decltype(as())>::format() == "Q"))
+        {
+            t = as.type_enum();
+            n = sizeof(as());
+        }
+        else if(info.format == "?" and py::format_descriptor<decltype(as())>::format() == "b")
+        {
+            t = migraphx::shape::bool_type;
+            n = sizeof(bool);
+        }
+    });
+
+    if(n == 0)
+    {
+        MIGRAPHX_THROW("MIGRAPHX PYTHON: Unsupported data type " + info.format);
+    }
+
+    auto strides = info.strides;
+    std::transform(strides.begin(), strides.end(), strides.begin(), [&](auto i) -> std::size_t {
+        return n > 0 ? i / n : 0;
+    });
+
+    // scalar support
+    if(info.shape.empty())
+    {
+        return migraphx::shape{t};
+    }
+    else
+    {
+        return migraphx::shape{t, info.shape, strides};
+    }
+}
+
+MIGRAPHX_PYBIND11_MODULE(migraphx, m)
+{
+    py::class_<migraphx::shape> shape_cls(m, "shape");
+    shape_cls
+        .def(py::init([](py::kwargs kwargs) {
+            auto v = migraphx::to_value(kwargs);
+            auto t = migraphx::shape::parse_type(v.get("type", "float"));
+            if(v.contains("dyn_dims"))
+            {
+                auto dyn_dims =
+                    migraphx::from_value<std::vector<migraphx::shape::dynamic_dimension>>(
+                        v.at("dyn_dims"));
+                return migraphx::shape(t, dyn_dims);
+            }
+            auto lens = v.get<std::size_t>("lens", {1});
+            if(v.contains("strides"))
+                return migraphx::shape(t, lens, v.at("strides").to_vector<std::size_t>());
+            else
+                return migraphx::shape(t, lens);
+        }))
+        .def("type", &migraphx::shape::type)
+        .def("lens", &migraphx::shape::lens)
+        .def("strides", &migraphx::shape::strides)
+        .def("ndim", &migraphx::shape::ndim)
+        .def("elements", &migraphx::shape::elements)
+        .def("bytes", &migraphx::shape::bytes)
+        .def("type_string", &migraphx::shape::type_string)
+        .def("type_size", &migraphx::shape::type_size)
+        .def("dyn_dims", &migraphx::shape::dyn_dims)
+        .def("packed", &migraphx::shape::packed)
+        .def("transposed", &migraphx::shape::transposed)
+        .def("broadcasted", &migraphx::shape::broadcasted)
+        .def("standard", &migraphx::shape::standard)
+        .def("scalar", &migraphx::shape::scalar)
+        .def("dynamic", &migraphx::shape::dynamic)
+        .def("__eq__", std::equal_to<migraphx::shape>{})
+        .def("__ne__", std::not_equal_to<migraphx::shape>{})
+        .def("__repr__", [](const migraphx::shape& s) { return migraphx::to_string(s); });
+
+    py::enum_<migraphx::shape::type_t>(shape_cls, "type_t")
+        MIGRAPHX_SHAPE_VISIT_TYPES(MIGRAPHX_PYTHON_GENERATE_SHAPE_ENUM);
+
+    py::class_<migraphx::shape::dynamic_dimension>(shape_cls, "dynamic_dimension")
+        .def(py::init<>())
+        .def(py::init<std::size_t, std::size_t>())
+        .def(py::init<std::size_t, std::size_t, std::set<std::size_t>>())
+        .def_readwrite("min", &migraphx::shape::dynamic_dimension::min)
+        .def_readwrite("max", &migraphx::shape::dynamic_dimension::max)
+        .def_readwrite("optimals", &migraphx::shape::dynamic_dimension::optimals)
+        .def("is_fixed", &migraphx::shape::dynamic_dimension::is_fixed);
+
+    py::class_<migraphx::argument>(m, "argument", py::buffer_protocol())
+        .def_buffer([](migraphx::argument& x) -> py::buffer_info { return to_buffer_info(x); })
+        .def(py::init([](py::buffer b) {
+            py::buffer_info info = b.request();
+            return migraphx::argument(to_shape(info), info.ptr);
+        }))
+        .def("get_shape", &migraphx::argument::get_shape)
+        .def("data_ptr",
+             [](migraphx::argument& x) { return reinterpret_cast<std::uintptr_t>(x.data()); })
+        .def("tolist",
+             [](migraphx::argument& x) {
+                 py::list l{x.get_shape().elements()};
+                 visit(x, [&](auto data) { l = py::cast(data.to_vector()); });
+                 return l;
+             })
+        .def("__eq__", std::equal_to<migraphx::argument>{})
+        .def("__ne__", std::not_equal_to<migraphx::argument>{})
+        .def("__repr__", [](const migraphx::argument& x) { return migraphx::to_string(x); });
+
+    py::class_<migraphx::target>(m, "target");
+
+    py::class_<migraphx::instruction_ref>(m, "instruction_ref")
+        .def("shape", [](migraphx::instruction_ref i) { return i->get_shape(); })
+        .def("op", [](migraphx::instruction_ref i) { return i->get_operator(); });
+
+    py::class_<migraphx::module, std::unique_ptr<migraphx::module, py::nodelete>>(m, "module")
+        .def("print", [](const migraphx::module& mm) { std::cout << mm << std::endl; })
+        .def(
+            "add_instruction",
+            [](migraphx::module& mm,
+               const migraphx::operation& op,
+               std::vector<migraphx::instruction_ref>& args,
+               std::vector<migraphx::module*>& mod_args) {
+                return mm.add_instruction(op, args, mod_args);
+            },
+            py::arg("op"),
+            py::arg("args"),
+            py::arg("mod_args") = std::vector<migraphx::module*>{})
+        .def(
+            "add_literal",
+            [](migraphx::module& mm, py::buffer data) {
+                py::buffer_info info = data.request();
+                auto literal_shape   = to_shape(info);
+                return mm.add_literal(literal_shape, reinterpret_cast<char*>(info.ptr));
+            },
+            py::arg("data"))
+        .def(
+            "add_parameter",
+            [](migraphx::module& mm, const std::string& name, const migraphx::shape shape) {
+                return mm.add_parameter(name, shape);
+            },
+            py::arg("name"),
+            py::arg("shape"))
+        .def(
+            "add_return",
+            [](migraphx::module& mm, std::vector<migraphx::instruction_ref>& args) {
+                return mm.add_return(args);
+            },
+            py::arg("args"))
+        .def("__repr__", [](const migraphx::module& mm) { return migraphx::to_string(mm); });
+
+    py::class_<migraphx::program>(m, "program")
+        .def(py::init([]() { return migraphx::program(); }))
+        .def("get_parameter_names", &migraphx::program::get_parameter_names)
+        .def("get_parameter_shapes", &migraphx::program::get_parameter_shapes)
+        .def("get_output_shapes", &migraphx::program::get_output_shapes)
+        .def("is_compiled", &migraphx::program::is_compiled)
+        .def(
+            "compile",
+            [](migraphx::program& p,
+               const migraphx::target& t,
+               bool offload_copy,
+               bool fast_math,
+               bool exhaustive_tune) {
+                migraphx::compile_options options;
+                options.offload_copy    = offload_copy;
+                options.fast_math       = fast_math;
+                options.exhaustive_tune = exhaustive_tune;
+                p.compile(t, options);
+            },
+            py::arg("t"),
+            py::arg("offload_copy")    = true,
+            py::arg("fast_math")       = true,
+            py::arg("exhaustive_tune") = false)
+        .def("get_main_module", [](const migraphx::program& p) { return p.get_main_module(); })
+        .def(
+            "create_module",
+            [](migraphx::program& p, const std::string& name) { return p.create_module(name); },
+            py::arg("name"))
+        .def("run",
+             [](migraphx::program& p, py::dict params) {
+                 migraphx::parameter_map pm;
+                 for(auto x : params)
+                 {
+                     std::string key      = x.first.cast<std::string>();
+                     py::buffer b         = x.second.cast<py::buffer>();
+                     py::buffer_info info = b.request();
+                     pm[key]              = migraphx::argument(to_shape(info), info.ptr);
+                 }
+                 return p.eval(pm);
+             })
+        .def("run_async",
+             [](migraphx::program& p,
+                py::dict params,
+                std::uintptr_t stream,
+                std::string stream_name) {
+                 migraphx::parameter_map pm;
+                 for(auto x : params)
+                 {
+                     std::string key      = x.first.cast<std::string>();
+                     py::buffer b         = x.second.cast<py::buffer>();
+                     py::buffer_info info = b.request();
+                     pm[key]              = migraphx::argument(to_shape(info), info.ptr);
+                 }
+                 migraphx::execution_environment exec_env{
+                     migraphx::any_ptr(reinterpret_cast<void*>(stream), stream_name), true};
+                 return p.eval(pm, exec_env);
+             })
+        .def("sort", &migraphx::program::sort)
+        .def("print", [](const migraphx::program& p) { std::cout << p << std::endl; })
+        .def("__eq__", std::equal_to<migraphx::program>{})
+        .def("__ne__", std::not_equal_to<migraphx::program>{})
+        .def("__repr__", [](const migraphx::program& p) { return migraphx::to_string(p); });
+
+    py::class_<migraphx::operation> op(m, "op");
+    op.def(py::init([](const std::string& name, py::kwargs kwargs) {
+          migraphx::value v = migraphx::value::object{};
+          if(kwargs)
+          {
+              v = migraphx::to_value(kwargs);
+          }
+          return migraphx::make_op(name, v);
+      }))
+        .def("name", &migraphx::operation::name);
+
+    py::enum_<migraphx::op::pooling_mode>(op, "pooling_mode")
+        .value("average", migraphx::op::pooling_mode::average)
+        .value("max", migraphx::op::pooling_mode::max)
+        .value("lpnorm", migraphx::op::pooling_mode::lpnorm);
+
+    py::enum_<migraphx::op::rnn_direction>(op, "rnn_direction")
+        .value("forward", migraphx::op::rnn_direction::forward)
+        .value("reverse", migraphx::op::rnn_direction::reverse)
+        .value("bidirectional", migraphx::op::rnn_direction::bidirectional);
+
+    m.def(
+        "argument_from_pointer",
+        [](const migraphx::shape shape, const int64_t address) {
+            return migraphx::argument(shape, reinterpret_cast<void*>(address));
+        },
+        py::arg("shape"),
+        py::arg("address"));
+
+    m.def(
+        "parse_tf",
+        [](const std::string& filename,
+           bool is_nhwc,
+           unsigned int batch_size,
+           std::unordered_map<std::string, std::vector<std::size_t>> map_input_dims,
+           std::vector<std::string> output_names) {
+            return migraphx::parse_tf(
+                filename, migraphx::tf_options{is_nhwc, batch_size, map_input_dims, output_names});
+        },
+        "Parse tf protobuf (default format is nhwc)",
+        py::arg("filename"),
+        py::arg("is_nhwc")        = true,
+        py::arg("batch_size")     = 1,
+        py::arg("map_input_dims") = std::unordered_map<std::string, std::vector<std::size_t>>(),
+        py::arg("output_names")   = std::vector<std::string>());
+
+    m.def(
+        "parse_onnx",
+        [](const std::string& filename,
+           unsigned int default_dim_value,
+           migraphx::shape::dynamic_dimension default_dyn_dim_value,
+           std::unordered_map<std::string, std::vector<std::size_t>> map_input_dims,
+           std::unordered_map<std::string, std::vector<migraphx::shape::dynamic_dimension>>
+               map_dyn_input_dims,
+           bool skip_unknown_operators,
+           bool print_program_on_error,
+           int64_t max_loop_iterations) {
+            migraphx::onnx_options options;
+            options.default_dim_value      = default_dim_value;
+            options.default_dyn_dim_value  = default_dyn_dim_value;
+            options.map_input_dims         = map_input_dims;
+            options.map_dyn_input_dims     = map_dyn_input_dims;
+            options.skip_unknown_operators = skip_unknown_operators;
+            options.print_program_on_error = print_program_on_error;
+            options.max_loop_iterations    = max_loop_iterations;
+            return migraphx::parse_onnx(filename, options);
+        },
+        "Parse onnx file",
+        py::arg("filename"),
+        py::arg("default_dim_value")     = 0,
+        py::arg("default_dyn_dim_value") = migraphx::shape::dynamic_dimension{1, 1},
+        py::arg("map_input_dims") = std::unordered_map<std::string, std::vector<std::size_t>>(),
+        py::arg("map_dyn_input_dims") =
+            std::unordered_map<std::string, std::vector<migraphx::shape::dynamic_dimension>>(),
+        py::arg("skip_unknown_operators") = false,
+        py::arg("print_program_on_error") = false,
+        py::arg("max_loop_iterations")    = 10);
+
+    m.def(
+        "parse_onnx_buffer",
+        [](const std::string& onnx_buffer,
+           unsigned int default_dim_value,
+           migraphx::shape::dynamic_dimension default_dyn_dim_value,
+           std::unordered_map<std::string, std::vector<std::size_t>> map_input_dims,
+           std::unordered_map<std::string, std::vector<migraphx::shape::dynamic_dimension>>
+               map_dyn_input_dims,
+           bool skip_unknown_operators,
+           bool print_program_on_error) {
+            migraphx::onnx_options options;
+            options.default_dim_value      = default_dim_value;
+            options.default_dyn_dim_value  = default_dyn_dim_value;
+            options.map_input_dims         = map_input_dims;
+            options.map_dyn_input_dims     = map_dyn_input_dims;
+            options.skip_unknown_operators = skip_unknown_operators;
+            options.print_program_on_error = print_program_on_error;
+            return migraphx::parse_onnx_buffer(onnx_buffer, options);
+        },
+        "Parse onnx file",
+        py::arg("filename"),
+        py::arg("default_dim_value")     = 0,
+        py::arg("default_dyn_dim_value") = migraphx::shape::dynamic_dimension{1, 1},
+        py::arg("map_input_dims") = std::unordered_map<std::string, std::vector<std::size_t>>(),
+        py::arg("map_dyn_input_dims") =
+            std::unordered_map<std::string, std::vector<migraphx::shape::dynamic_dimension>>(),
+        py::arg("skip_unknown_operators") = false,
+        py::arg("print_program_on_error") = false);
+
+    m.def(
+        "load",
+        [](const std::string& name, const std::string& format) {
+            migraphx::file_options options;
+            options.format = format;
+            return migraphx::load(name, options);
+        },
+        "Load MIGraphX program",
+        py::arg("filename"),
+        py::arg("format") = "msgpack");
+
+    m.def(
+        "save",
+        [](const migraphx::program& p, const std::string& name, const std::string& format) {
+            migraphx::file_options options;
+            options.format = format;
+            return migraphx::save(p, name, options);
+        },
+        "Save MIGraphX program",
+        py::arg("p"),
+        py::arg("filename"),
+        py::arg("format") = "msgpack");
+
+    m.def("get_target", &migraphx::make_target);
+    m.def("create_argument", [](const migraphx::shape& s, const std::vector<double>& values) {
+        if(values.size() != s.elements())
+            MIGRAPHX_THROW("Values and shape elements do not match");
+        migraphx::argument a{s};
+        a.fill(values.begin(), values.end());
+        return a;
+    });
+    m.def("generate_argument", &migraphx::generate_argument, py::arg("s"), py::arg("seed") = 0);
+    m.def("fill_argument", &migraphx::fill_argument, py::arg("s"), py::arg("value"));
+    m.def("quantize_fp16",
+          &migraphx::quantize_fp16,
+          py::arg("prog"),
+          py::arg("ins_names") = std::vector<std::string>{"all"});
+    m.def("quantize_int8",
+          &migraphx::quantize_int8,
+          py::arg("prog"),
+          py::arg("t"),
+          py::arg("calibration") = std::vector<migraphx::parameter_map>{},
+          py::arg("ins_names")   = std::vector<std::string>{"dot", "convolution"});
+
+#ifdef HAVE_GPU
+    m.def("allocate_gpu", &migraphx::gpu::allocate_gpu, py::arg("s"), py::arg("host") = false);
+    m.def("to_gpu", &migraphx::gpu::to_gpu, py::arg("arg"), py::arg("host") = false);
+    m.def("from_gpu", &migraphx::gpu::from_gpu);
+    m.def("gpu_sync", [] { migraphx::gpu::gpu_sync(); });
+#endif
+
+#ifdef VERSION_INFO
+    m.attr("__version__") = VERSION_INFO;
+#else
+    m.attr("__version__") = "dev";
+#endif
+}

docker/rocm/rocm-pin-600

@@ -0,0 +1,3 @@
+Package: *
+Pin: release o=repo.radeon.com
+Pin-Priority: 600

docker/rocm/rocm.hcl

@@ -0,0 +1,38 @@
+variable "AMDGPU" {
+  default = "gfx900"
+}
+variable "ROCM" {
+  default = "5.7.3"
+}
+variable "HSA_OVERRIDE_GFX_VERSION" {
+  default = ""
+}
+variable "HSA_OVERRIDE" {
+  default = "1"
+}
+target deps {
+  dockerfile = "docker/main/Dockerfile"
+  platforms = ["linux/amd64"]
+  target = "deps"
+}
+
+target rootfs {
+  dockerfile = "docker/main/Dockerfile"
+  platforms = ["linux/amd64"]
+  target = "rootfs"
+}
+
+target rocm {
+  dockerfile = "docker/rocm/Dockerfile"
+  contexts = {
+    deps = "target:deps",
+    rootfs = "target:rootfs"
+  }
+  platforms = ["linux/amd64"]
+  args = {
+    AMDGPU = AMDGPU,
+    ROCM = ROCM,
+    HSA_OVERRIDE_GFX_VERSION = HSA_OVERRIDE_GFX_VERSION,
+    HSA_OVERRIDE = HSA_OVERRIDE
+  }
+}

docker/rocm/rocm.list

@@ -0,0 +1 @@
+deb [arch=amd64 signed-by=/etc/apt/keyrings/rocm.gpg] https://repo.radeon.com/rocm/apt/5.7.3 focal main

docker/rocm/rocm.mk

@@ -0,0 +1,17 @@
+BOARDS += rocm
+
+# AMD/ROCm is chunky so we build couple of smaller images for specific chipsets
+ROCM_CHIPSETS:=gfx900:9.0.0 gfx1030:10.3.0 gfx1100:11.0.0
+
+local-rocm: version
+	$(foreach chipset,$(ROCM_CHIPSETS),AMDGPU=$(word 1,$(subst :, ,$(chipset))) HSA_OVERRIDE_GFX_VERSION=$(word 2,$(subst :, ,$(chipset))) HSA_OVERRIDE=1 docker buildx bake --load --file=docker/rocm/rocm.hcl --set rocm.tags=frigate:latest-rocm-$(word 1,$(subst :, ,$(chipset))) rocm;)
+	unset HSA_OVERRIDE_GFX_VERSION && HSA_OVERRIDE=0 AMDGPU=gfx docker buildx bake --load --file=docker/rocm/rocm.hcl --set rocm.tags=frigate:latest-rocm rocm
+
+build-rocm: version
+	$(foreach chipset,$(ROCM_CHIPSETS),AMDGPU=$(word 1,$(subst :, ,$(chipset))) HSA_OVERRIDE_GFX_VERSION=$(word 2,$(subst :, ,$(chipset))) HSA_OVERRIDE=1 docker buildx bake --file=docker/rocm/rocm.hcl --set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm-$(chipset) rocm;)
+	unset HSA_OVERRIDE_GFX_VERSION && HSA_OVERRIDE=0 AMDGPU=gfx docker buildx bake --file=docker/rocm/rocm.hcl --set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm rocm
+
+push-rocm: build-rocm
+	$(foreach chipset,$(ROCM_CHIPSETS),AMDGPU=$(word 1,$(subst :, ,$(chipset))) HSA_OVERRIDE_GFX_VERSION=$(word 2,$(subst :, ,$(chipset))) HSA_OVERRIDE=1 docker buildx bake --push --file=docker/rocm/rocm.hcl --set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm-$(chipset) rocm;)
+	unset HSA_OVERRIDE_GFX_VERSION && HSA_OVERRIDE=0 AMDGPU=gfx docker buildx bake --push --file=docker/rocm/rocm.hcl --set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm rocm
+

docker/rocm/rootfs/etc/s6-overlay/s6-rc.d/compile-rocm-models/run

@@ -0,0 +1,20 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Compile YoloV8 ONNX files into ROCm MIGraphX files
+
+OVERRIDE=$(cd /opt/frigate && python3 -c 'import frigate.detectors.plugins.rocm as rocm; print(rocm.auto_override_gfx_version())')
+
+if ! test -z "$OVERRIDE"; then
+  echo "Using HSA_OVERRIDE_GFX_VERSION=${OVERRIDE}"
+  export HSA_OVERRIDE_GFX_VERSION=$OVERRIDE
+fi
+
+for onnx in /config/model_cache/yolov8/*.onnx
+do
+  mxr="${onnx%.onnx}.mxr"
+  if ! test -f $mxr; then
+    echo "processing $onnx into $mxr"
+    /opt/rocm/bin/migraphx-driver compile $onnx --optimize --gpu --enable-offload-copy --binary -o $mxr
+  fi
+done
+

docker/rocm/rootfs/etc/s6-overlay/s6-rc.d/compile-rocm-models/type

@@ -0,0 +1 @@
+oneshot

docker/rocm/rootfs/etc/s6-overlay/s6-rc.d/compile-rocm-models/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/compile-rocm-models/run

docker/tensorrt/Dockerfile.base

@@ -8,6 +8,8 @@ ARG TRT_BASE=nvcr.io/nvidia/tensorrt:23.03-py3
 # Build TensorRT-specific library
 FROM ${TRT_BASE} AS trt-deps
 
+ARG COMPUTE_LEVEL
+
 RUN apt-get update \
     && apt-get install -y git build-essential cuda-nvcc-* cuda-nvtx-* libnvinfer-dev libnvinfer-plugin-dev libnvparsers-dev libnvonnxparsers-dev \
     && rm -rf /var/lib/apt/lists/*

docker/tensorrt/detector/tensorrt_libyolo.sh

@@ -11,7 +11,7 @@ git clone --depth 1 https://github.com/NateMeyer/tensorrt_demos.git -b condition
 if [ ! -e /usr/local/cuda ]; then
     ln -s /usr/local/cuda-* /usr/local/cuda
 fi
-cd ./tensorrt_demos/plugins && make all -j$(nproc)
+cd ./tensorrt_demos/plugins && make all -j$(nproc) computes="${COMPUTE_LEVEL:-}"
 cp libyolo_layer.so /usr/local/lib/libyolo_layer.so
 
 # Store yolo scripts for later conversion

docker/tensorrt/trt.hcl

@@ -10,12 +10,16 @@ variable "SLIM_BASE" {
 variable "TRT_BASE" {
   default = null
 }
+variable "COMPUTE_LEVEL" {
+  default = ""
+}
 
 target "_build_args" {
   args = {
     BASE_IMAGE = BASE_IMAGE,
     SLIM_BASE = SLIM_BASE,
-    TRT_BASE = TRT_BASE
+    TRT_BASE = TRT_BASE,
+    COMPUTE_LEVEL = COMPUTE_LEVEL
   }
   platforms = ["linux/${ARCH}"]
 }

docker/tensorrt/trt.mk

@@ -2,7 +2,7 @@ BOARDS += trt
 
 JETPACK4_BASE ?= timongentzsch/l4t-ubuntu20-opencv:latest	# L4T 32.7.1 JetPack 4.6.1
 JETPACK5_BASE ?= nvcr.io/nvidia/l4t-tensorrt:r8.5.2-runtime	# L4T 35.3.1 JetPack 5.1.1
-X86_DGPU_ARGS := ARCH=amd64
+X86_DGPU_ARGS := ARCH=amd64 COMPUTE_LEVEL="50 60 70 80 90"
 JETPACK4_ARGS := ARCH=arm64 BASE_IMAGE=$(JETPACK4_BASE) SLIM_BASE=$(JETPACK4_BASE) TRT_BASE=$(JETPACK4_BASE)
 JETPACK5_ARGS := ARCH=arm64 BASE_IMAGE=$(JETPACK5_BASE) SLIM_BASE=$(JETPACK5_BASE) TRT_BASE=$(JETPACK5_BASE)
 

docker/webonly/Dockerfile

@@ -0,0 +1,19 @@
+# syntax=docker/dockerfile:1.6
+
+# Frigate web build
+# This should be architecture agnostic, so speed up the build on multiarch by not using QEMU.
+FROM --platform=$BUILDPLATFORM node:20 AS web-build
+
+WORKDIR /work
+COPY web/package.json web/package-lock.json ./
+RUN npm install
+
+COPY web/ ./
+RUN npm run build \
+    && mv dist/BASE_PATH/monacoeditorwork/* dist/assets/ \
+    && rm -rf dist/BASE_PATH
+
+FROM --platform=$BUILDPLATFORM ghcr.io/blakeblackshear/frigate:stable AS frigate
+WORKDIR /opt/frigate/
+RUN rm -rf web/ && mkdir web
+COPY --from=web-build /work/dist/ web/

docs/docs/configuration/advanced.md

@@ -80,6 +80,14 @@ model:
   input_pixel_format: "bgr"
 ```
 
+#### `labelmap`
+
+:::warning
+
+If the labelmap is customized then the labels used for alerts will need to be adjusted as well. See [alert labels](../configuration/review.md#restricting-alerts-to-specific-labels) for more info.
+
+:::
+
 The labelmap can be customized to your needs. A common reason to do this is to combine multiple object types that are easily confused when you don't need to be as granular such as car/truck. By default, truck is renamed to car because they are often confused. You cannot add new object types, but you can change the names of existing objects in the model.
 
 ```yaml
@@ -96,7 +104,7 @@ model:
 
 Note that if you rename objects in the labelmap, you will also need to update your `objects -> track` list as well.
 
-:::caution
+:::warning
 
 Some labels have special handling and modifications can disable functionality.
 
@@ -106,7 +114,53 @@ Some labels have special handling and modifications can disable functionality.
 
 :::
 
-## Custom ffmpeg build
+## Network Configuration
+
+Changes to Frigate's internal network configuration can be made by bind mounting nginx.conf into the container. For example:
+
+```yaml
+services:
+  frigate:
+    container_name: frigate
+    ...
+    volumes:
+      ...
+      - /path/to/your/nginx.conf:/usr/local/nginx/conf/nginx.conf
+```
+
+### Enabling IPv6
+
+IPv6 is disabled by default, to enable IPv6 listen.gotmpl needs to be bind mounted with IPv6 enabled. For example:
+
+```
+{{ if not .enabled }}
+# intended for external traffic, protected by auth
+listen 8971;
+{{ else }}
+# intended for external traffic, protected by auth
+listen 8971 ssl;
+
+# intended for internal traffic, not protected by auth
+listen 5000;
+```
+
+becomes
+
+```
+{{ if not .enabled }}
+# intended for external traffic, protected by auth
+listen [::]:8971 ipv6only=off;
+{{ else }}
+# intended for external traffic, protected by auth
+listen [::]:8971 ipv6only=off ssl;
+
+# intended for internal traffic, not protected by auth
+listen [::]:5000 ipv6only=off;
+```
+
+## Custom Dependencies
+
+### Custom ffmpeg build
 
 Included with Frigate is a build of ffmpeg that works for the vast majority of users. However, there exists some hardware setups which have incompatibilities with the included build. In this case, a docker volume mapping can be used to overwrite the included ffmpeg build with an ffmpeg build that works for your specific hardware setup.
 
@@ -118,9 +172,9 @@ To do this:
 
 NOTE: The folder that is mapped from the host needs to be the folder that contains `/bin`. So if the full structure is `/home/appdata/frigate/custom-ffmpeg/bin/ffmpeg` then `/home/appdata/frigate/custom-ffmpeg` needs to be mapped to `/usr/lib/btbn-ffmpeg`.
 
-## Custom go2rtc version
+### Custom go2rtc version
 
-Frigate currently includes go2rtc v1.8.4, there may be certain cases where you want to run a different version of go2rtc.
+Frigate currently includes go2rtc v1.9.4, there may be certain cases where you want to run a different version of go2rtc.
 
 To do this:
 

docs/docs/configuration/authentication.md

@@ -0,0 +1,132 @@
+---
+id: authentication
+title: Authentication
+---
+
+# Authentication
+
+Frigate stores user information in its database. Password hashes are generated using industry standard PBKDF2-SHA256 with 600,000 iterations. Upon successful login, a JWT token is issued with an expiration date and set as a cookie. The cookie is refreshed as needed automatically. This JWT token can also be passed in the Authorization header as a bearer token.
+
+Users are managed in the UI under Settings > Users.
+
+The following ports are available to access the Frigate web UI.
+
+| Port   | Description                                                                                                                                                                                                  |
+| ------ | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| `8971` | Authenticated UI and API. Reverse proxies should use this port.                                                                                                                                              |
+| `5000` | Internal unauthenticated UI and API access. Access to this port should be limited. Intended to be used within the docker network for services that integrate with Frigate and do not support authentication. |
+
+## Onboarding
+
+On startup, an admin user and password are generated and printed in the logs. It is recommended to set a new password for the admin account after logging in for the first time under Settings > Users.
+
+## Resetting admin password
+
+In the event that you are locked out of your instance, you can tell Frigate to reset the admin password and print it in the logs on next startup using the `reset_admin_password` setting in your config file.
+
+## Login failure rate limiting
+
+In order to limit the risk of brute force attacks, rate limiting is available for login failures. This is implemented with Flask-Limiter, and the string notation for valid values is available in [the documentation](https://flask-limiter.readthedocs.io/en/stable/configuration.html#rate-limit-string-notation).
+
+For example, `1/second;5/minute;20/hour` will rate limit the login endpoint when failures occur more than:
+
+- 1 time per second
+- 5 times per minute
+- 20 times per hour
+
+Restarting Frigate will reset the rate limits.
+
+If you are running Frigate behind a proxy, you will want to set `trusted_proxies` or these rate limits will apply to the upstream proxy IP address. This means that a brute force attack will rate limit login attempts from other devices and could temporarily lock you out of your instance. In order to ensure rate limits only apply to the actual IP address where the requests are coming from, you will need to list the upstream networks that you want to trust. These trusted proxies are checked against the `X-Forwarded-For` header when looking for the IP address where the request originated.
+
+If you are running a reverse proxy in the same docker compose file as Frigate, here is an example of how your auth config might look:
+
+```yaml
+auth:
+  failed_login_rate_limit: "1/second;5/minute;20/hour"
+  trusted_proxies:
+    - 172.18.0.0/16 # <---- this is the subnet for the internal docker compose network
+```
+
+## JWT Token Secret
+
+The JWT token secret needs to be kept secure. Anyone with this secret can generate valid JWT tokens to authenticate with Frigate. This should be a cryptographically random string of at least 64 characters.
+
+You can generate a token using the Python secret library with the following command:
+
+```shell
+python3 -c 'import secrets; print(secrets.token_hex(64))'
+```
+
+Frigate looks for a JWT token secret in the following order:
+
+1. An environment variable named `FRIGATE_JWT_SECRET`
+2. A docker secret named `FRIGATE_JWT_SECRET` in `/run/secrets/`
+3. A `jwt_secret` option from the Home Assistant Addon options
+4. A `.jwt_secret` file in the config directory
+
+If no secret is found on startup, Frigate generates one and stores it in a `.jwt_secret` file in the config directory.
+
+Changing the secret will invalidate current tokens.
+
+## Proxy configuration
+
+Frigate can be configured to leverage features of common upstream authentication proxies such as Authelia, Authentik, oauth2_proxy, or traefik-forward-auth.
+
+If you are leveraging the authentication of an upstream proxy, you likely want to disable Frigate's authentication. Optionally, if communication between the reverse proxy and Frigate is over an untrusted network, you should set an `auth_secret` in the `proxy` config and configure the proxy to send the secret value as a header named `X-Proxy-Secret`. Assuming this is an untrusted network, you will also want to [configure a real TLS certificate](tls.md) to ensure the traffic can't simply be sniffed to steal the secret.
+
+Here is an example of how to disable Frigate's authentication and also ensure the requests come only from your known proxy.
+
+```yaml
+auth:
+  enabled: False
+
+proxy:
+  auth_secret: <some random long string>
+```
+
+You can use the following code to generate a random secret.
+
+```shell
+python3 -c 'import secrets; print(secrets.token_hex(64))'
+```
+
+### Header mapping
+
+If you have disabled Frigate's authentication and your proxy supports passing a header with the authenticated username, you can use the `header_map` config to specify the header name so it is passed to Frigate. For example, the following will map the `X-Forwarded-User` value. Header names are not case sensitive.
+
+```yaml
+proxy:
+  ...
+  header_map:
+    user: x-forwarded-user
+```
+
+Note that only the following list of headers are permitted by default:
+
+```
+Remote-User
+Remote-Groups
+Remote-Email
+Remote-Name
+X-Forwarded-User
+X-Forwarded-Groups
+X-Forwarded-Email
+X-Forwarded-Preferred-Username
+X-authentik-username
+X-authentik-groups
+X-authentik-email
+X-authentik-name
+X-authentik-uid
+```
+
+If you would like to add more options, you can overwrite the default file with a docker bind mount at `/usr/local/nginx/conf/proxy_trusted_headers.conf`. Reference the source code for the default file formatting.
+
+Future versions of Frigate may leverage group and role headers for authorization in Frigate as well.
+
+### Login page redirection
+
+Frigate gracefully performs login page redirection that should work with most authentication proxies. If your reverse proxy returns a `Location` header on `401`, `302`, or `307` unauthorized responses, Frigate's frontend will automatically detect it and redirect to that URL.
+
+### Custom logout url
+
+If your reverse proxy has a dedicated logout url, you can specify using the `logout_url` config option. This will update the link for the `Logout` link in the UI.

docs/docs/configuration/autotracking.md

@@ -159,7 +159,7 @@ This is often caused by the same reason as above - the `MoveStatus` ONVIF parame
 
 ### I'm seeing this error in the logs: "Autotracker: motion estimator couldn't get transformations". What does this mean?
 
-To maintain object tracking during PTZ moves, Frigate tracks the motion of your camera based on the details of the frame. If you are seeing this message, it could mean that your `zoom_factor` may be set too high, the scene around your detected object does not have enough details (like hard edges or color variatons), or your camera's shutter speed is too slow and motion blur is occurring. Try reducing `zoom_factor`, finding a way to alter the scene around your object, or changing your camera's shutter speed.
+To maintain object tracking during PTZ moves, Frigate tracks the motion of your camera based on the details of the frame. If you are seeing this message, it could mean that your `zoom_factor` may be set too high, the scene around your detected object does not have enough details (like hard edges or color variations), or your camera's shutter speed is too slow and motion blur is occurring. Try reducing `zoom_factor`, finding a way to alter the scene around your object, or changing your camera's shutter speed.
 
 ### Calibration seems to have completed, but the camera is not actually moving to track my object. Why?
 

docs/docs/configuration/birdseye.md

@@ -1,13 +1,20 @@
 # Birdseye
 
-Birdseye allows a heads-up view of your cameras to see what is going on around your property / space without having to watch all cameras that may have nothing happening. Birdseye allows specific modes that intelligently show and disappear based on what you care about. 
+In addition to Frigate's Live camera dashboard, Birdseye allows a portable heads-up view of your cameras to see what is going on around your property / space without having to watch all cameras that may have nothing happening. Birdseye allows specific modes that intelligently show and disappear based on what you care about.
+
+Birdseye can be viewed by adding the "Birdseye" camera to a Camera Group in the Web UI. Add a Camera Group by pressing the "+" icon on the Live page, and choose "Birdseye" as one of the cameras.
+
+Birdseye can also be used in HomeAssistant dashboards, cast to media devices, etc.
+
+## Birdseye Behavior
 
 ### Birdseye Modes
 
 Birdseye offers different modes to customize which cameras show under which circumstances.
- - **continuous:** All cameras are always included
- - **motion:** Cameras that have detected motion within the last 30 seconds are included
- - **objects:** Cameras that have tracked an active object within the last 30 seconds are included
+
+- **continuous:** All cameras are always included
+- **motion:** Cameras that have detected motion within the last 30 seconds are included
+- **objects:** Cameras that have tracked an active object within the last 30 seconds are included
 
 ### Custom Birdseye Icon
 
@@ -34,6 +41,29 @@ cameras:
       enabled: False
 ```
 
+### Birdseye Inactivity
+
+By default birdseye shows all cameras that have had the configured activity in the last 30 seconds, this can be configured:
+
+```yaml
+birdseye:
+  enabled: True
+  inactivity_threshold: 15
+```
+
+## Birdseye Layout
+
+### Birdseye Dimensions
+
+The resolution and aspect ratio of birdseye can be configured. Resolution will increase the quality but does not affect the layout. Changing the aspect ratio of birdseye does affect how cameras are laid out.
+
+```yaml
+birdseye:
+  enabled: True
+  width: 1280
+  height: 720
+```
+
 ### Sorting cameras in the Birdseye view
 
 It is possible to override the order of cameras that are being shown in the Birdseye view.
@@ -54,4 +84,28 @@ cameras:
       order: 2
 ```
 
-*Note*: Cameras are sorted by default using their name to ensure a constant view inside Birdseye.
+_Note_: Cameras are sorted by default using their name to ensure a constant view inside Birdseye.
+
+### Birdseye Cameras
+
+It is possible to limit the number of cameras shown on birdseye at one time. When this is enabled, birdseye will show the cameras with most recent activity. There is a cooldown to ensure that cameras do not switch too frequently.
+
+For example, this can be configured to only show the most recently active camera.
+
+```yaml
+birdseye:
+  enabled: True
+  layout:
+    max_cameras: 1
+```
+
+### Birdseye Scaling
+
+By default birdseye tries to fit 2 cameras in each row and then double in size until a suitable layout is found. The scaling can be configured with a value between 1.0 and 5.0 depending on use case.
+
+```yaml
+birdseye:
+  enabled: True
+  layout:
+    scaling_factor: 3.0
+```

docs/docs/configuration/camera_specific.md

@@ -69,16 +69,12 @@ cameras:
     ffmpeg:
       output_args:
         record: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c:v copy -tag:v hvc1 -bsf:v hevc_mp4toannexb -c:a aac
-        rtmp: -c:v copy -c:a aac -f flv
 
       inputs:
         - path: rtsp://user:password@camera-ip:554/H264/ch1/main/av_stream # <----- Update for your camera
           roles:
             - detect
             - record
-            - rtmp
-    rtmp:
-      enabled: False # <-- RTMP should be disabled if your stream is not H264
     detect:
       width: # <- optional, by default Frigate tries to automatically detect resolution
       height: # <- optional, by default Frigate tries to automatically detect resolution
@@ -105,6 +101,15 @@ If available, recommended settings are:
 
 According to [this discussion](https://github.com/blakeblackshear/frigate/issues/3235#issuecomment-1135876973), the http video streams seem to be the most reliable for Reolink.
 
+Cameras connected via a Reolink NVR can be connected with the http stream, use `channel[0..15]` in the stream url for the additional channels.
+The setup of main stream can be also done via RTSP, but isn't always reliable on all hardware versions. The example configuration is working with the oldest HW version RLN16-410 device with multiple types of cameras.
+
+:::warning
+
+The below configuration only works for reolink cameras with stream resolution of 5MP or lower, 8MP+ cameras need to use RTSP as http-flv is not supported in this case.
+
+:::
+
 ```yaml
 go2rtc:
   streams:
@@ -112,6 +117,11 @@ go2rtc:
       - "ffmpeg:http://reolink_ip/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=username&password=password#video=copy#audio=copy#audio=opus"
     your_reolink_camera_sub:
       - "ffmpeg:http://reolink_ip/flv?port=1935&app=bcs&stream=channel0_ext.bcs&user=username&password=password"
+    your_reolink_camera_via_nvr:
+      - "ffmpeg:http://reolink_nvr_ip/flv?port=1935&app=bcs&stream=channel3_main.bcs&user=username&password=password" # channel numbers are 0-15
+      - "ffmpeg:your_reolink_camera_via_nvr#audio=aac"
+    your_reolink_camera_via_nvr_sub:
+      - "ffmpeg:http://reolink_nvr_ip/flv?port=1935&app=bcs&stream=channel3_ext.bcs&user=username&password=password"
 
 cameras:
   your_reolink_camera:
@@ -125,6 +135,17 @@ cameras:
           input_args: preset-rtsp-restream
           roles:
             - detect
+  reolink_via_nvr:
+    ffmpeg:
+      inputs:
+        - path: rtsp://127.0.0.1:8554/your_reolink_camera_via_nvr?video=copy&audio=aac
+          input_args: preset-rtsp-restream
+          roles:
+            - record
+        - path: rtsp://127.0.0.1:8554/your_reolink_camera_via_nvr_sub?video=copy
+          input_args: preset-rtsp-restream
+          roles:
+            - detect
 ```
 
 #### Reolink Doorbell
@@ -154,15 +175,14 @@ go2rtc:
       - rtspx://192.168.1.1:7441/abcdefghijk
 ```
 
-[See the go2rtc docs for more information](https://github.com/AlexxIT/go2rtc/tree/v1.8.4#source-rtsp)
+[See the go2rtc docs for more information](https://github.com/AlexxIT/go2rtc/tree/v1.9.4#source-rtsp)
 
-In the Unifi 2.0 update Unifi Protect Cameras had a change in audio sample rate which causes issues for ffmpeg. The input rate needs to be set for record and rtmp if used directly with unifi protect.
+In the Unifi 2.0 update Unifi Protect Cameras had a change in audio sample rate which causes issues for ffmpeg. The input rate needs to be set for record if used directly with unifi protect.
 
 ```yaml
 ffmpeg:
   output_args:
     record: preset-record-ubiquiti
-    rtmp: preset-rtmp-ubiquiti # recommend using go2rtc instead
 ```
 
 ### TP-Link VIGI Cameras

docs/docs/configuration/cameras.md

@@ -11,12 +11,11 @@ A camera is enabled by default but can be temporarily disabled by using `enabled
 
 Each role can only be assigned to one input per camera. The options for roles are as follows:
 
-| Role     | Description                                                                              |
-| -------- | ---------------------------------------------------------------------------------------- |
-| `detect` | Main feed for object detection. [docs](object_detectors.md)                              |
-| `record` | Saves segments of the video feed based on configuration settings. [docs](record.md)      |
-| `audio`  | Feed for audio based detection. [docs](audio_detectors.md)                               |
-| `rtmp`   | Deprecated: Broadcast as an RTMP feed for other services to consume. [docs](restream.md) |
+| Role     | Description                                                                         |
+| -------- | ----------------------------------------------------------------------------------- |
+| `detect` | Main feed for object detection. [docs](object_detectors.md)                         |
+| `record` | Saves segments of the video feed based on configuration settings. [docs](record.md) |
+| `audio`  | Feed for audio based detection. [docs](audio_detectors.md)                          |
 
 ```yaml
 mqtt:
@@ -29,7 +28,6 @@ cameras:
         - path: rtsp://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2
           roles:
             - detect
-            - rtmp # <- deprecated, recommend using restream instead
         - path: rtsp://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/live
           roles:
             - record
@@ -52,7 +50,7 @@ For camera model specific settings check the [camera specific](camera_specific.m
 
 ## Setting up camera PTZ controls
 
-:::caution
+:::warning
 
 Not every PTZ supports ONVIF, which is the standard protocol Frigate uses to communicate with your camera. Check the [official list of ONVIF conformant products](https://www.onvif.org/conformant-products/), your camera documentation, or camera manufacturer's website to ensure your PTZ supports ONVIF. Also, ensure your camera is running the latest firmware.
 
@@ -86,13 +84,33 @@ This list of working and non-working PTZ cameras is based on user feedback.
 | Ctronics PTZ             |      ✅      |      ❌      |                                                                                                                                                 |
 | Dahua                    |      ✅      |      ✅      |                                                                                                                                                 |
 | Foscam R5                |      ✅      |      ❌      |                                                                                                                                                 |
+| Hanwha XNP-6550RH        |      ✅      |      ❌      |                                                                                                                                                 |
 | Hikvision                |      ✅      |      ❌      | Incomplete ONVIF support (MoveStatus won't update even on latest firmware) - reported with HWP-N4215IH-DE and DS-2DE3304W-DE, but likely others |
 | Reolink 511WA            |      ✅      |      ❌      | Zoom only                                                                                                                                       |
 | Reolink E1 Pro           |      ✅      |      ❌      |                                                                                                                                                 |
 | Reolink E1 Zoom          |      ✅      |      ❌      |                                                                                                                                                 |
 | Reolink RLC-823A 16x     |      ✅      |      ❌      |                                                                                                                                                 |
 | Sunba 405-D20X           |      ✅      |      ❌      |                                                                                                                                                 |
-| Tapo C200                |      ✅      |      ❌      | Incomplete ONVIF support                                                                                                                        |
-| Tapo C210                |      ❌      |      ❌      | Incomplete ONVIF support                                                                                                                        |
+| Tapo                     |      ✅      |      ❌      | Many models supported, ONVIF Service Port: 2020                                                                                                 |
 | Uniview IPC672LR-AX4DUPK |      ✅      |      ❌      | Firmware says FOV relative movement is supported, but camera doesn't actually move when sending ONVIF commands                                  |
 | Vikylin PTZ-2804X-I2     |      ❌      |      ❌      | Incomplete ONVIF support                                                                                                                        |
+
+## Setting up camera groups
+
+:::tip
+
+It is recommended to set up camera groups using the UI.
+
+:::
+
+Cameras can be grouped together and assigned a name and icon, this allows them to be reviewed and filtered together. There will always be the default group for all cameras.
+
+```yaml
+camera_groups:
+  front:
+    cameras:
+      - driveway_cam
+      - garage_cam
+    icon: LuCar
+    order: 0
+```

docs/docs/configuration/ffmpeg_presets.md

@@ -18,13 +18,11 @@ See [the hwaccel docs](/configuration/hardware_acceleration.md) for more info on
 | preset-vaapi          | Intel & AMD VAAPI              | Check hwaccel docs to ensure correct driver is chosen |
 | preset-intel-qsv-h264 | Intel QSV with h264 stream     | If issues occur recommend using vaapi preset instead  |
 | preset-intel-qsv-h265 | Intel QSV with h265 stream     | If issues occur recommend using vaapi preset instead  |
-| preset-nvidia-h264    | Nvidia GPU with h264 stream    |                                                       |
-| preset-nvidia-h265    | Nvidia GPU with h265 stream    |                                                       |
-| preset-nvidia-mjpeg   | Nvidia GPU with mjpeg stream   | Recommend restreaming mjpeg and using nvidia-h264     |
+| preset-nvidia         | Nvidia GPU                     |                                                       |
 | preset-jetson-h264    | Nvidia Jetson with h264 stream |                                                       |
 | preset-jetson-h265    | Nvidia Jetson with h265 stream |                                                       |
-| preset-rk-h264        | Rockchip MPP with h264 stream  | Use image with *-rk suffix and privileged mode        |
-| preset-rk-h265        | Rockchip MPP with h265 stream  | Use image with *-rk suffix and privileged mode        |
+| preset-rk-h264        | Rockchip MPP with h264 stream  | Use image with \*-rk suffix and privileged mode       |
+| preset-rk-h265        | Rockchip MPP with h265 stream  | Use image with \*-rk suffix and privileged mode       |
 
 ### Input Args Presets
 
@@ -44,7 +42,7 @@ See [the camera specific docs](/configuration/camera_specific.md) for more info
 | preset-rtsp-udp                  | RTSP Stream via UDP       | Use when camera is UDP only                                                                      |
 | preset-rtsp-blue-iris            | Blue Iris RTSP Stream     | Use when consuming a stream from Blue Iris                                                       |
 
-:::caution
+:::warning
 
 It is important to be mindful of input args when using restream because you can have a mix of protocols. `http` and `rtmp` presets cannot be used with `rtsp` streams. For example, when using a reolink cam with the rtsp restream as a source for record the preset-http-reolink will cause a crash. In this case presets will need to be set at the stream level. See the example below.
 
@@ -73,11 +71,11 @@ cameras:
 
 Output args presets help make the config more readable and handle use cases for different types of streams to ensure consistent recordings.
 
-| Preset                           | Usage                             | Other Notes                                   |
-| -------------------------------- | --------------------------------- | --------------------------------------------- |
-| preset-record-generic            | Record WITHOUT audio              | This is the default when nothing is specified |
-| preset-record-generic-audio-aac  | Record WITH aac audio             | Use this to enable audio in recordings        |
-| preset-record-generic-audio-copy | Record WITH original audio        | Use this to enable audio in recordings        |
-| preset-record-mjpeg              | Record an mjpeg stream            | Recommend restreaming mjpeg stream instead    |
-| preset-record-jpeg               | Record live jpeg                  | Recommend restreaming live jpeg instead       |
-| preset-record-ubiquiti           | Record ubiquiti stream with audio | Recordings with ubiquiti non-standard audio   |
+| Preset                           | Usage                             | Other Notes                                                                                                                          |
+| -------------------------------- | --------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------ |
+| preset-record-generic            | Record WITHOUT audio              | This is the default when nothing is specified                                                                                        |
+| preset-record-generic-audio-copy | Record WITH original audio        | Use this to enable audio in recordings                                                                                               |
+| preset-record-generic-audio-aac  | Record WITH transcoded aac audio  | Use this to transcode to aac audio. If your source is already aac, use preset-record-generic-audio-copy instead to avoid re-encoding |
+| preset-record-mjpeg              | Record an mjpeg stream            | Recommend restreaming mjpeg stream instead                                                                                           |
+| preset-record-jpeg               | Record live jpeg                  | Recommend restreaming live jpeg instead                                                                                              |
+| preset-record-ubiquiti           | Record ubiquiti stream with audio | Recordings with ubiquiti non-standard audio                                                                                          |

docs/docs/configuration/hardware_acceleration.md

@@ -5,14 +5,16 @@ title: Hardware Acceleration
 
 # Hardware Acceleration
 
-It is recommended to update your configuration to enable hardware accelerated decoding in ffmpeg. Depending on your system, these parameters may not be compatible. More information on hardware accelerated decoding for ffmpeg can be found here: https://trac.ffmpeg.org/wiki/HWAccelIntro
+It is highly recommended to use a GPU for hardware acceleration in Frigate. Some types of hardware acceleration are detected and used automatically, but you may need to update your configuration to enable hardware accelerated decoding in ffmpeg.
+
+Depending on your system, these parameters may not be compatible. More information on hardware accelerated decoding for ffmpeg can be found here: https://trac.ffmpeg.org/wiki/HWAccelIntro
 
 # Officially Supported
 
 ## Raspberry Pi 3/4
 
-Ensure you increase the allocated RAM for your GPU to at least 128 (raspi-config > Performance Options > GPU Memory).
-**NOTICE**: If you are using the addon, you may need to turn off `Protection mode` for hardware acceleration.
+Ensure you increase the allocated RAM for your GPU to at least 128 (`raspi-config` > Performance Options > GPU Memory).
+If you are using the HA addon, you may need to use the full access variant and turn off `Protection mode` for hardware acceleration.
 
 ```yaml
 # if you want to decode a h264 stream
@@ -26,23 +28,46 @@ ffmpeg:
 
 :::note
 
-If running Frigate in docker, you either need to run in priviliged mode or be sure to map the /dev/video1x devices to Frigate
+If running Frigate in Docker, you either need to run in privileged mode or
+map the `/dev/video*` devices to Frigate. With Docker compose add:
 
 ```yaml
-docker run -d \
---name frigate \
-...
---device /dev/video10 \
-ghcr.io/blakeblackshear/frigate:stable
+services:
+  frigate:
+    ...
+    devices:
+      - /dev/video11:/dev/video11
 ```
 
+Or with `docker run`:
+
+```bash
+docker run -d \
+  --name frigate \
+  ...
+  --device /dev/video11 \
+  ghcr.io/blakeblackshear/frigate:stable
+```
+
+`/dev/video11` is the correct device (on Raspberry Pi 4B). You can check
+by running the following and looking for `H264`:
+
+```bash
+for d in /dev/video*; do
+  echo -e "---\n$d"
+  v4l2-ctl --list-formats-ext -d $d
+done
+```
+
+Or map in all the `/dev/video*` devices.
+
 :::
 
 ## Intel-based CPUs
 
 ### Via VAAPI
 
-VAAPI supports automatic profile selection so it will work automatically with both H.264 and H.265 streams. VAAPI is recommended for all generations of Intel-based CPUs if QSV does not work.
+VAAPI supports automatic profile selection so it will work automatically with both H.264 and H.265 streams. VAAPI is recommended for all generations of Intel-based CPUs.
 
 ```yaml
 ffmpeg:
@@ -57,7 +82,7 @@ With some of the processors, like the J4125, the default driver `iHD` doesn't se
 
 ### Via Quicksync (>=10th Generation only)
 
-QSV must be set specifically based on the video encoding of the stream.
+If VAAPI does not work for you, you can try QSV if your processor supports it. QSV must be set specifically based on the video encoding of the stream.
 
 #### H.264 streams
 
@@ -263,10 +288,10 @@ These instructions were originally based on the [Jellyfin documentation](https:/
 
 ## NVIDIA Jetson (Orin AGX, Orin NX, Orin Nano\*, Xavier AGX, Xavier NX, TX2, TX1, Nano)
 
-A separate set of docker images is available that is based on Jetpack/L4T. They comes with an `ffmpeg` build
+A separate set of docker images is available that is based on Jetpack/L4T. They come with an `ffmpeg` build
 with codecs that use the Jetson's dedicated media engine. If your Jetson host is running Jetpack 4.6, use the
-`frigate-tensorrt-jp4` image, or if your Jetson host is running Jetpack 5.0+, use the `frigate-tensorrt-jp5`
-image. Note that the Orin Nano has no video encoder, so frigate will use software encoding on this platform,
+`stable-tensorrt-jp4` tagged image, or if your Jetson host is running Jetpack 5.0+, use the `stable-tensorrt-jp5`
+tagged image. Note that the Orin Nano has no video encoder, so frigate will use software encoding on this platform,
 but the image will still allow hardware decoding and tensorrt object detection.
 
 You will need to use the image with the nvidia container runtime:
@@ -277,7 +302,7 @@ You will need to use the image with the nvidia container runtime:
 docker run -d \
   ...
   --runtime nvidia
-  ghcr.io/blakeblackshear/frigate-tensorrt-jp5
+  ghcr.io/blakeblackshear/frigate:stable-tensorrt-jp5
 ```
 
 ### Docker Compose - Jetson
@@ -287,7 +312,7 @@ version: '2.4'
 services:
   frigate:
     ...
-    image: ghcr.io/blakeblackshear/frigate-tensorrt-jp5
+    image: ghcr.io/blakeblackshear/frigate:stable-tensorrt-jp5
     runtime: nvidia   # Add this
 ```
 
@@ -337,15 +362,15 @@ that NVDEC/NVDEC1 are in use.
 
 ## Rockchip platform
 
-Hardware accelerated video de-/encoding is supported on all Rockchip SoCs.
+Hardware accelerated video de-/encoding is supported on all Rockchip SoCs using [Nyanmisaka's FFmpeg 6.1 Fork](https://github.com/nyanmisaka/ffmpeg-rockchip) based on [Rockchip's mpp library](https://github.com/rockchip-linux/mpp).
 
-### Setup
+### Prerequisites
 
-Use a frigate docker image with `-rk` suffix and enable privileged mode by adding the `--privileged` flag to your docker run command or `privileged: true` to your `docker-compose.yml` file.
+Make sure to follow the [Rockchip specific installation instructions](/frigate/installation#rockchip-platform).
 
 ### Configuration
 
-Add one of the following ffmpeg presets to your `config.yaml` to enable hardware acceleration:
+Add one of the following FFmpeg presets to your `config.yaml` to enable hardware video processing:
 
 ```yaml
 # if you try to decode a h264 encoded stream
@@ -362,29 +387,3 @@ ffmpeg:
 Make sure that your SoC supports hardware acceleration for your input stream. For example, if your camera streams with h265 encoding and a 4k resolution, your SoC must be able to de- and encode h265 with a 4k resolution or higher. If you are unsure whether your SoC meets the requirements, take a look at the datasheet.
 
 :::
-
-### go2rtc presets for hardware accelerated transcoding
-
-If your input stream is to be transcoded using hardware acceleration, there are these presets for go2rtc: `h264/rk` and `h265/rk`. You can use them this way:
-
-```
-go2rtc:
-  streams:
-    Cam_h264: ffmpeg:rtsp://username:password@192.168.1.123/av_stream/ch0#video=h264/rk
-    Cam_h265: ffmpeg:rtsp://username:password@192.168.1.123/av_stream/ch0#video=h265/rk
-```
-
-:::warning
-
-The go2rtc docs may suggest the following configuration:
-
-```
-go2rtc:
-  streams:
-    Cam_h264: ffmpeg:rtsp://username:password@192.168.1.123/av_stream/ch0#video=h264#hardware=rk
-    Cam_h265: ffmpeg:rtsp://username:password@192.168.1.123/av_stream/ch0#video=h265#hardware=rk
-```
-
-However, this does not currently work.
-
-:::

docs/docs/configuration/index.md

@@ -1,33 +1,35 @@
 ---
 id: index
-title: Frigate Configuration Reference
+title: Frigate Configuration
 ---
 
 For Home Assistant Addon installations, the config file needs to be in the root of your Home Assistant config directory (same location as `configuration.yaml`). It can be named `frigate.yaml` or `frigate.yml`, but if both files exist `frigate.yaml` will be preferred and `frigate.yml` will be ignored.
 
 For all other installation types, the config file should be mapped to `/config/config.yml` inside the container.
 
-It is recommended to start with a minimal configuration and add to it as described in [this guide](../guides/getting_started.md):
+It is recommended to start with a minimal configuration and add to it as described in [this guide](../guides/getting_started.md) and use the built in configuration editor in Frigate's UI which supports validation.
 
 ```yaml
 mqtt:
-  host: mqtt.server.com
+  enabled: False
+
 cameras:
-  back:
+  dummy_camera: # <--- this will be changed to your actual camera later
+    enabled: False
     ffmpeg:
       inputs:
-        - path: rtsp://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2
+        - path: rtsp://127.0.0.1:554/rtsp
           roles:
             - detect
 ```
 
-### VSCode Configuration Schema
+## VSCode Configuration Schema
 
-VSCode (and VSCode addon) supports the JSON schemas which will automatically validate the config. This can be added by adding `# yaml-language-server: $schema=http://frigate_host:5000/api/config/schema.json` to the top of the config file. `frigate_host` being the IP address of Frigate or `ccab4aaf-frigate` if running in the addon.
+VSCode supports JSON schemas for automatically validating configuration files. You can enable this feature by adding `# yaml-language-server: $schema=http://frigate_host:5000/api/config/schema.json` to the beginning of the configuration file. Replace `frigate_host` with the IP address or hostname of your Frigate server. If you're using both VSCode and Frigate as an add-on, you should use `ccab4aaf-frigate` instead. Make sure to expose the internal unauthenticated port `5000` when accessing the config from VSCode on another machine.
 
-### Environment Variable Substitution
+## Environment Variable Substitution
 
-Frigate supports the use of environment variables starting with `FRIGATE_` **only** where specifically indicated in the configuration reference below. For example, the following values can be replaced at runtime by using environment variables:
+Frigate supports the use of environment variables starting with `FRIGATE_` **only** where specifically indicated in the [reference config](./reference.md). For example, the following values can be replaced at runtime by using environment variables:
 
 ```yaml
 mqtt:
@@ -47,631 +49,188 @@ onvif:
   password: "{FRIGATE_RTSP_PASSWORD}"
 ```
 
-### Full configuration reference:
+```yaml
+go2rtc:
+  rtsp:
+    username: "{FRIGATE_GO2RTC_RTSP_USERNAME}"
+    password: "{FRIGATE_GO2RTC_RTSP_PASSWORD}"
+```
 
-:::caution
+## Common configuration examples
 
-It is not recommended to copy this full configuration file. Only specify values that are different from the defaults. Configuration options and default values may change in future versions.
+Here are some common starter configuration examples. Refer to the [reference config](./reference.md) for detailed information about all the config values.
 
-:::
+### Raspberry Pi Home Assistant Addon with USB Coral
+
+- Single camera with 720p, 5fps stream for detect
+- MQTT connected to home assistant mosquitto addon
+- Hardware acceleration for decoding video
+- USB Coral detector
+- Save all video with any detectable motion for 7 days regardless of whether any objects were detected or not
+- Continue to keep all video if it was during any event for 30 days
+- Save snapshots for 30 days
+- Motion mask for the camera timestamp
 
 ```yaml
 mqtt:
-  # Optional: Enable mqtt server (default: shown below)
-  enabled: True
-  # Required: host name
-  host: mqtt.server.com
-  # Optional: port (default: shown below)
-  port: 1883
-  # Optional: topic prefix (default: shown below)
-  # NOTE: must be unique if you are running multiple instances
-  topic_prefix: frigate
-  # Optional: client id (default: shown below)
-  # NOTE: must be unique if you are running multiple instances
-  client_id: frigate
-  # Optional: user
-  # NOTE: MQTT user can be specified with an environment variables or docker secrets that must begin with 'FRIGATE_'.
-  #       e.g. user: '{FRIGATE_MQTT_USER}'
-  user: mqtt_user
-  # Optional: password
-  # NOTE: MQTT password can be specified with an environment variables or docker secrets that must begin with 'FRIGATE_'.
-  #       e.g. password: '{FRIGATE_MQTT_PASSWORD}'
-  password: password
-  # Optional: tls_ca_certs for enabling TLS using self-signed certs (default: None)
-  tls_ca_certs: /path/to/ca.crt
-  # Optional: tls_client_cert and tls_client key in order to use self-signed client
-  # certificates (default: None)
-  # NOTE: certificate must not be password-protected
-  #       do not set user and password when using a client certificate
-  tls_client_cert: /path/to/client.crt
-  tls_client_key: /path/to/client.key
-  # Optional: tls_insecure (true/false) for enabling TLS verification of
-  # the server hostname in the server certificate (default: None)
-  tls_insecure: false
-  # Optional: interval in seconds for publishing stats (default: shown below)
-  stats_interval: 60
+  host: core-mosquitto
+  user: mqtt-user
+  password: xxxxxxxxxx
 
-# Optional: Detectors configuration. Defaults to a single CPU detector
-detectors:
-  # Required: name of the detector
-  detector_name:
-    # Required: type of the detector
-    # Frigate provided types include 'cpu', 'edgetpu', 'openvino' and 'tensorrt' (default: shown below)
-    # Additional detector types can also be plugged in.
-    # Detectors may require additional configuration.
-    # Refer to the Detectors configuration page for more information.
-    type: cpu
-
-# Optional: Database configuration
-database:
-  # The path to store the SQLite DB (default: shown below)
-  path: /config/frigate.db
-
-# Optional: model modifications
-model:
-  # Optional: path to the model (default: automatic based on detector)
-  path: /edgetpu_model.tflite
-  # Optional: path to the labelmap (default: shown below)
-  labelmap_path: /labelmap.txt
-  # Required: Object detection model input width (default: shown below)
-  width: 320
-  # Required: Object detection model input height (default: shown below)
-  height: 320
-  # Optional: Object detection model input colorspace
-  # Valid values are rgb, bgr, or yuv. (default: shown below)
-  input_pixel_format: rgb
-  # Optional: Object detection model input tensor format
-  # Valid values are nhwc or nchw (default: shown below)
-  input_tensor: nhwc
-  # Optional: Object detection model type, currently only used with the OpenVINO detector
-  # Valid values are ssd, yolox, yolov5, or yolov8 (default: shown below)
-  model_type: ssd
-  # Optional: Label name modifications. These are merged into the standard labelmap.
-  labelmap:
-    2: vehicle
-
-# Optional: Audio Events Configuration
-# NOTE: Can be overridden at the camera level
-audio:
-  # Optional: Enable audio events (default: shown below)
-  enabled: False
-  # Optional: Configure the amount of seconds without detected audio to end the event (default: shown below)
-  max_not_heard: 30
-  # Optional: Configure the min rms volume required to run audio detection (default: shown below)
-  # As a rule of thumb:
-  #  - 200 - high sensitivity
-  #  - 500 - medium sensitivity
-  #  - 1000 - low sensitivity
-  min_volume: 500
-  # Optional: Types of audio to listen for (default: shown below)
-  listen:
-    - bark
-    - fire_alarm
-    - scream
-    - speech
-    - yell
-  # Optional: Filters to configure detection.
-  filters:
-    # Label that matches label in listen config.
-    speech:
-      # Minimum score that triggers an audio event (default: shown below)
-      threshold: 0.8
-
-# Optional: logger verbosity settings
-logger:
-  # Optional: Default log verbosity (default: shown below)
-  default: info
-  # Optional: Component specific logger overrides
-  logs:
-    frigate.event: debug
-
-# Optional: set environment variables
-environment_vars:
-  EXAMPLE_VAR: value
-
-# Optional: birdseye configuration
-# NOTE: Can (enabled, mode) be overridden at the camera level
-birdseye:
-  # Optional: Enable birdseye view (default: shown below)
-  enabled: True
-  # Optional: Restream birdseye via RTSP (default: shown below)
-  # NOTE: Enabling this will set birdseye to run 24/7 which may increase CPU usage somewhat.
-  restream: False
-  # Optional: Width of the output resolution (default: shown below)
-  width: 1280
-  # Optional: Height of the output resolution (default: shown below)
-  height: 720
-  # Optional: Encoding quality of the mpeg1 feed (default: shown below)
-  # 1 is the highest quality, and 31 is the lowest. Lower quality feeds utilize less CPU resources.
-  quality: 8
-  # Optional: Mode of the view. Available options are: objects, motion, and continuous
-  #   objects - cameras are included if they have had a tracked object within the last 30 seconds
-  #   motion - cameras are included if motion was detected in the last 30 seconds
-  #   continuous - all cameras are included always
-  mode: objects
-
-# Optional: ffmpeg configuration
-# More information about presets at https://docs.frigate.video/configuration/ffmpeg_presets
 ffmpeg:
-  # Optional: global ffmpeg args (default: shown below)
-  global_args: -hide_banner -loglevel warning -threads 2
-  # Optional: global hwaccel args (default: shown below)
-  # NOTE: See hardware acceleration docs for your specific device
-  hwaccel_args: []
-  # Optional: global input args (default: shown below)
-  input_args: preset-rtsp-generic
-  # Optional: global output args
-  output_args:
-    # Optional: output args for detect streams (default: shown below)
-    detect: -threads 2 -f rawvideo -pix_fmt yuv420p
-    # Optional: output args for record streams (default: shown below)
-    record: preset-record-generic
-    # Optional: output args for rtmp streams (default: shown below)
-    rtmp: preset-rtmp-generic
-  # Optional: Time in seconds to wait before ffmpeg retries connecting to the camera. (default: shown below)
-  # If set too low, frigate will retry a connection to the camera's stream too frequently, using up the limited streams some cameras can allow at once
-  # If set too high, then if a ffmpeg crash or camera stream timeout occurs, you could potentially lose up to a maximum of retry_interval second(s) of footage
-  # NOTE: this can be a useful setting for Wireless / Battery cameras to reduce how much footage is potentially lost during a connection timeout.
-  retry_interval: 10
+  hwaccel_args: preset-rpi-64-h264
 
-# Optional: Detect configuration
-# NOTE: Can be overridden at the camera level
-detect:
-  # Optional: width of the frame for the input with the detect role (default: use native stream resolution)
-  width: 1280
-  # Optional: height of the frame for the input with the detect role (default: use native stream resolution)
-  height: 720
-  # Optional: desired fps for your camera for the input with the detect role (default: shown below)
-  # NOTE: Recommended value of 5. Ideally, try and reduce your FPS on the camera.
-  fps: 5
-  # Optional: enables detection for the camera (default: True)
-  enabled: True
-  # Optional: Number of consecutive detection hits required for an object to be initialized in the tracker. (default: 1/2 the frame rate)
-  min_initialized: 2
-  # Optional: Number of frames without a detection before Frigate considers an object to be gone. (default: 5x the frame rate)
-  max_disappeared: 25
-  # Optional: Configuration for stationary object tracking
-  stationary:
-    # Optional: Frequency for confirming stationary objects (default: same as threshold)
-    # When set to 1, object detection will run to confirm the object still exists on every frame.
-    # If set to 10, object detection will run to confirm the object still exists on every 10th frame.
-    interval: 50
-    # Optional: Number of frames without a position change for an object to be considered stationary (default: 10x the frame rate or 10s)
-    threshold: 50
-    # Optional: Define a maximum number of frames for tracking a stationary object (default: not set, track forever)
-    # This can help with false positives for objects that should only be stationary for a limited amount of time.
-    # It can also be used to disable stationary object tracking. For example, you may want to set a value for person, but leave
-    # car at the default.
-    # WARNING: Setting these values overrides default behavior and disables stationary object tracking.
-    #          There are very few situations where you would want it disabled. It is NOT recommended to
-    #          copy these values from the example config into your config unless you know they are needed.
-    max_frames:
-      # Optional: Default for all object types (default: not set, track forever)
-      default: 3000
-      # Optional: Object specific values
-      objects:
-        person: 1000
-  # Optional: Milliseconds to offset detect annotations by (default: shown below).
-  # There can often be latency between a recording and the detect process,
-  # especially when using separate streams for detect and record.
-  # Use this setting to make the timeline bounding boxes more closely align
-  # with the recording. The value can be positive or negative.
-  # TIP: Imagine there is an event clip with a person walking from left to right.
-  #      If the event timeline bounding box is consistently to the left of the person
-  #      then the value should be decreased. Similarly, if a person is walking from
-  #      left to right and the bounding box is consistently ahead of the person
-  #      then the value should be increased.
-  # TIP: This offset is dynamic so you can change the value and it will update existing
-  #      events, this makes it easy to tune.
-  # WARNING: Fast moving objects will likely not have the bounding box align.
-  annotation_offset: 0
+detectors:
+  coral:
+    type: edgetpu
+    device: usb
 
-# Optional: Object configuration
-# NOTE: Can be overridden at the camera level
-objects:
-  # Optional: list of objects to track from labelmap.txt (default: shown below)
-  track:
-    - person
-  # Optional: mask to prevent all object types from being detected in certain areas (default: no mask)
-  # Checks based on the bottom center of the bounding box of the object.
-  # NOTE: This mask is COMBINED with the object type specific mask below
-  mask: 0,0,1000,0,1000,200,0,200
-  # Optional: filters to reduce false positives for specific object types
-  filters:
-    person:
-      # Optional: minimum width*height of the bounding box for the detected object (default: 0)
-      min_area: 5000
-      # Optional: maximum width*height of the bounding box for the detected object (default: 24000000)
-      max_area: 100000
-      # Optional: minimum width/height of the bounding box for the detected object (default: 0)
-      min_ratio: 0.5
-      # Optional: maximum width/height of the bounding box for the detected object (default: 24000000)
-      max_ratio: 2.0
-      # Optional: minimum score for the object to initiate tracking (default: shown below)
-      min_score: 0.5
-      # Optional: minimum decimal percentage for tracked object's computed score to be considered a true positive (default: shown below)
-      threshold: 0.7
-      # Optional: mask to prevent this object type from being detected in certain areas (default: no mask)
-      # Checks based on the bottom center of the bounding box of the object
-      mask: 0,0,1000,0,1000,200,0,200
-
-# Optional: Motion configuration
-# NOTE: Can be overridden at the camera level
-motion:
-  # Optional: The threshold passed to cv2.threshold to determine if a pixel is different enough to be counted as motion. (default: shown below)
-  # Increasing this value will make motion detection less sensitive and decreasing it will make motion detection more sensitive.
-  # The value should be between 1 and 255.
-  threshold: 30
-  # Optional: The percentage of the image used to detect lightning or other substantial changes where motion detection
-  #           needs to recalibrate. (default: shown below)
-  # Increasing this value will make motion detection more likely to consider lightning or ir mode changes as valid motion.
-  # Decreasing this value will make motion detection more likely to ignore large amounts of motion such as a person approaching
-  # a doorbell camera.
-  lightning_threshold: 0.8
-  # Optional: Minimum size in pixels in the resized motion image that counts as motion (default: shown below)
-  # Increasing this value will prevent smaller areas of motion from being detected. Decreasing will
-  # make motion detection more sensitive to smaller moving objects.
-  # As a rule of thumb:
-  #  - 10 - high sensitivity
-  #  - 30 - medium sensitivity
-  #  - 50 - low sensitivity
-  contour_area: 10
-  # Optional: Alpha value passed to cv2.accumulateWeighted when averaging frames to determine the background (default: shown below)
-  # Higher values mean the current frame impacts the average a lot, and a new object will be averaged into the background faster.
-  # Low values will cause things like moving shadows to be detected as motion for longer.
-  # https://www.geeksforgeeks.org/background-subtraction-in-an-image-using-concept-of-running-average/
-  frame_alpha: 0.01
-  # Optional: Height of the resized motion frame  (default: 100)
-  # Higher values will result in more granular motion detection at the expense of higher CPU usage.
-  # Lower values result in less CPU, but small changes may not register as motion.
-  frame_height: 100
-  # Optional: motion mask
-  # NOTE: see docs for more detailed info on creating masks
-  mask: 0,900,1080,900,1080,1920,0,1920
-  # Optional: improve contrast (default: shown below)
-  # Enables dynamic contrast improvement. This should help improve night detections at the cost of making motion detection more sensitive
-  # for daytime.
-  improve_contrast: True
-  # Optional: Delay when updating camera motion through MQTT from ON -> OFF (default: shown below).
-  mqtt_off_delay: 30
-
-# Optional: Record configuration
-# NOTE: Can be overridden at the camera level
 record:
-  # Optional: Enable recording (default: shown below)
-  # WARNING: If recording is disabled in the config, turning it on via
-  #          the UI or MQTT later will have no effect.
-  enabled: False
-  # Optional: Number of minutes to wait between cleanup runs (default: shown below)
-  # This can be used to reduce the frequency of deleting recording segments from disk if you want to minimize i/o
-  expire_interval: 60
-  # Optional: Sync recordings with disk on startup and once a day (default: shown below).
-  sync_recordings: False
-  # Optional: Retention settings for recording
+  enabled: True
   retain:
-    # Optional: Number of days to retain recordings regardless of events (default: shown below)
-    # NOTE: This should be set to 0 and retention should be defined in events section below
-    #       if you only want to retain recordings of events.
-    days: 0
-    # Optional: Mode for retention. Available options are: all, motion, and active_objects
-    #   all - save all recording segments regardless of activity
-    #   motion - save all recordings segments with any detected motion
-    #   active_objects - save all recording segments with active/moving objects
-    # NOTE: this mode only applies when the days setting above is greater than 0
-    mode: all
-  # Optional: Recording Export Settings
-  export:
-    # Optional: Timelapse Output Args (default: shown below).
-    # NOTE: The default args are set to fit 24 hours of recording into 1 hour playback.
-    # See https://stackoverflow.com/a/58268695 for more info on how these args work.
-    # As an example: if you wanted to go from 24 hours to 30 minutes that would be going
-    # from 86400 seconds to 1800 seconds which would be 1800 / 86400 = 0.02.
-    # The -r (framerate) dictates how smooth the output video is.
-    # So the args would be -vf setpts=0.02*PTS -r 30 in that case.
-    timelapse_args: "-vf setpts=0.04*PTS -r 30"
-  # Optional: Event recording settings
+    days: 7
+    mode: motion
   events:
-    # Optional: Number of seconds before the event to include (default: shown below)
-    pre_capture: 5
-    # Optional: Number of seconds after the event to include (default: shown below)
-    post_capture: 5
-    # Optional: Objects to save recordings for. (default: all tracked objects)
-    objects:
-      - person
-    # Optional: Restrict recordings to objects that entered any of the listed zones (default: no required zones)
-    required_zones: []
-    # Optional: Retention settings for recordings of events
     retain:
-      # Required: Default retention days (default: shown below)
-      default: 10
-      # Optional: Mode for retention. (default: shown below)
-      #   all - save all recording segments for events regardless of activity
-      #   motion - save all recordings segments for events with any detected motion
-      #   active_objects - save all recording segments for event with active/moving objects
-      #
-      # NOTE: If the retain mode for the camera is more restrictive than the mode configured
-      #       here, the segments will already be gone by the time this mode is applied.
-      #       For example, if the camera retain mode is "motion", the segments without motion are
-      #       never stored, so setting the mode to "all" here won't bring them back.
+      default: 30
       mode: motion
-      # Optional: Per object retention days
-      objects:
-        person: 15
 
-# Optional: Configuration for the jpg snapshots written to the clips directory for each event
-# NOTE: Can be overridden at the camera level
 snapshots:
-  # Optional: Enable writing jpg snapshot to /media/frigate/clips (default: shown below)
-  enabled: False
-  # Optional: save a clean PNG copy of the snapshot image (default: shown below)
-  clean_copy: True
-  # Optional: print a timestamp on the snapshots (default: shown below)
-  timestamp: False
-  # Optional: draw bounding box on the snapshots (default: shown below)
-  bounding_box: True
-  # Optional: crop the snapshot (default: shown below)
-  crop: False
-  # Optional: height to resize the snapshot to (default: original size)
-  height: 175
-  # Optional: Restrict snapshots to objects that entered any of the listed zones (default: no required zones)
-  required_zones: []
-  # Optional: Camera override for retention settings (default: global values)
+  enabled: True
   retain:
-    # Required: Default retention days (default: shown below)
-    default: 10
-    # Optional: Per object retention days
-    objects:
-      person: 15
-  # Optional: quality of the encoded jpeg, 0-100 (default: shown below)
-  quality: 70
+    default: 30
 
-# Optional: RTMP configuration
-# NOTE: RTMP is deprecated in favor of restream
-# NOTE: Can be overridden at the camera level
-rtmp:
-  # Optional: Enable the RTMP stream (default: False)
+cameras:
+  name_of_your_camera:
+    detect:
+      width: 1280
+      height: 720
+      fps: 5
+    ffmpeg:
+      inputs:
+        - path: rtsp://10.0.10.10:554/rtsp
+          roles:
+            - detect
+    motion:
+      mask:
+        - 0.000,0.427,0.002,0.000,0.999,0.000,0.999,0.781,0.885,0.456,0.700,0.424,0.701,0.311,0.507,0.294,0.453,0.347,0.451,0.400
+```
+
+### Standalone Intel Mini PC with USB Coral
+
+- Single camera with 720p, 5fps stream for detect
+- MQTT disabled (not integrated with home assistant)
+- VAAPI hardware acceleration for decoding video
+- USB Coral detector
+- Save all video with any detectable motion for 7 days regardless of whether any objects were detected or not
+- Continue to keep all video if it was during any event for 30 days
+- Save snapshots for 30 days
+- Motion mask for the camera timestamp
+
+```yaml
+mqtt:
   enabled: False
 
-# Optional: Restream configuration
-# Uses https://github.com/AlexxIT/go2rtc (v1.8.3)
-go2rtc:
+ffmpeg:
+  hwaccel_args: preset-vaapi
 
-# Optional: jsmpeg stream configuration for WebUI
-live:
-  # Optional: Set the name of the stream that should be used for live view
-  # in frigate WebUI. (default: name of camera)
-  stream_name: camera_name
-  # Optional: Set the height of the jsmpeg stream. (default: 720)
-  # This must be less than or equal to the height of the detect stream. Lower resolutions
-  # reduce bandwidth required for viewing the jsmpeg stream. Width is computed to match known aspect ratio.
-  height: 720
-  # Optional: Set the encode quality of the jsmpeg stream (default: shown below)
-  # 1 is the highest quality, and 31 is the lowest. Lower quality feeds utilize less CPU resources.
-  quality: 8
+detectors:
+  coral:
+    type: edgetpu
+    device: usb
 
-# Optional: in-feed timestamp style configuration
-# NOTE: Can be overridden at the camera level
-timestamp_style:
-  # Optional: Position of the timestamp (default: shown below)
-  #           "tl" (top left), "tr" (top right), "bl" (bottom left), "br" (bottom right)
-  position: "tl"
-  # Optional: Format specifier conform to the Python package "datetime" (default: shown below)
-  #           Additional Examples:
-  #             german: "%d.%m.%Y %H:%M:%S"
-  format: "%m/%d/%Y %H:%M:%S"
-  # Optional: Color of font
-  color:
-    # All Required when color is specified (default: shown below)
-    red: 255
-    green: 255
-    blue: 255
-  # Optional: Line thickness of font (default: shown below)
-  thickness: 2
-  # Optional: Effect of lettering (default: shown below)
-  #           None (No effect),
-  #           "solid" (solid background in inverse color of font)
-  #           "shadow" (shadow for font)
-  effect: None
+record:
+  enabled: True
+  retain:
+    days: 7
+    mode: motion
+  events:
+    retain:
+      default: 30
+      mode: motion
+
+snapshots:
+  enabled: True
+  retain:
+    default: 30
 
-# Required
 cameras:
-  # Required: name of the camera
-  back:
-    # Optional: Enable/Disable the camera (default: shown below).
-    # If disabled: config is used but no live stream and no capture etc.
-    # Events/Recordings are still viewable.
-    enabled: True
-    # Required: ffmpeg settings for the camera
+  name_of_your_camera:
+    detect:
+      width: 1280
+      height: 720
+      fps: 5
     ffmpeg:
-      # Required: A list of input streams for the camera. See documentation for more information.
       inputs:
-        # Required: the path to the stream
-        # NOTE: path may include environment variables or docker secrets, which must begin with 'FRIGATE_' and be referenced in {}
-        - path: rtsp://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2
-          # Required: list of roles for this stream. valid values are: audio,detect,record,rtmp
-          # NOTICE: In addition to assigning the audio, record, and rtmp roles,
-          # they must also be enabled in the camera config.
+        - path: rtsp://10.0.10.10:554/rtsp
           roles:
-            - audio
             - detect
-            - record
-            - rtmp
-          # Optional: stream specific global args (default: inherit)
-          # global_args:
-          # Optional: stream specific hwaccel args (default: inherit)
-          # hwaccel_args:
-          # Optional: stream specific input args (default: inherit)
-          # input_args:
-      # Optional: camera specific global args (default: inherit)
-      # global_args:
-      # Optional: camera specific hwaccel args (default: inherit)
-      # hwaccel_args:
-      # Optional: camera specific input args (default: inherit)
-      # input_args:
-      # Optional: camera specific output args (default: inherit)
-      # output_args:
-
-    # Optional: timeout for highest scoring image before allowing it
-    # to be replaced by a newer image. (default: shown below)
-    best_image_timeout: 60
-
-    # Optional: URL to visit the camera web UI directly from the system page. Might not be available on every camera.
-    webui_url: ""
-
-    # Optional: zones for this camera
-    zones:
-      # Required: name of the zone
-      # NOTE: This must be different than any camera names, but can match with another zone on another
-      #       camera.
-      front_steps:
-        # Required: List of x,y coordinates to define the polygon of the zone.
-        # NOTE: Presence in a zone is evaluated only based on the bottom center of the objects bounding box.
-        coordinates: 545,1077,747,939,788,805
-        # Optional: Number of consecutive frames required for object to be considered present in the zone (default: shown below).
-        inertia: 3
-        # Optional: List of objects that can trigger this zone (default: all tracked objects)
-        objects:
-          - person
-        # Optional: Zone level object filters.
-        # NOTE: The global and camera filters are applied upstream.
-        filters:
-          person:
-            min_area: 5000
-            max_area: 100000
-            threshold: 0.7
-
-    # Optional: Configuration for the jpg snapshots published via MQTT
-    mqtt:
-      # Optional: Enable publishing snapshot via mqtt for camera (default: shown below)
-      # NOTE: Only applies to publishing image data to MQTT via 'frigate/<camera_name>/<object_name>/snapshot'.
-      # All other messages will still be published.
-      enabled: True
-      # Optional: print a timestamp on the snapshots (default: shown below)
-      timestamp: True
-      # Optional: draw bounding box on the snapshots (default: shown below)
-      bounding_box: True
-      # Optional: crop the snapshot (default: shown below)
-      crop: True
-      # Optional: height to resize the snapshot to (default: shown below)
-      height: 270
-      # Optional: jpeg encode quality (default: shown below)
-      quality: 70
-      # Optional: Restrict mqtt messages to objects that entered any of the listed zones (default: no required zones)
-      required_zones: []
-
-    # Optional: Configuration for how camera is handled in the GUI.
-    ui:
-      # Optional: Adjust sort order of cameras in the UI. Larger numbers come later (default: shown below)
-      # By default the cameras are sorted alphabetically.
-      order: 0
-      # Optional: Whether or not to show the camera in the Frigate UI (default: shown below)
-      dashboard: True
-
-    # Optional: connect to ONVIF camera
-    # to enable PTZ controls.
-    onvif:
-      # Required: host of the camera being connected to.
-      host: 0.0.0.0
-      # Optional: ONVIF port for device (default: shown below).
-      port: 8000
-      # Optional: username for login.
-      # NOTE: Some devices require admin to access ONVIF.
-      user: admin
-      # Optional: password for login.
-      password: admin
-      # Optional: PTZ camera object autotracking. Keeps a moving object in
-      # the center of the frame by automatically moving the PTZ camera.
-      autotracking:
-        # Optional: enable/disable object autotracking. (default: shown below)
-        enabled: False
-        # Optional: calibrate the camera on startup (default: shown below)
-        # A calibration will move the PTZ in increments and measure the time it takes to move.
-        # The results are used to help estimate the position of tracked objects after a camera move.
-        # Frigate will update your config file automatically after a calibration with
-        # a "movement_weights" entry for the camera. You should then set calibrate_on_startup to False.
-        calibrate_on_startup: False
-        # Optional: the mode to use for zooming in/out on objects during autotracking. (default: shown below)
-        # Available options are: disabled, absolute, and relative
-        #   disabled - don't zoom in/out on autotracked objects, use pan/tilt only
-        #   absolute - use absolute zooming (supported by most PTZ capable cameras)
-        #   relative - use relative zooming (not supported on all PTZs, but makes concurrent pan/tilt/zoom movements)
-        zooming: disabled
-        # Optional: A value to change the behavior of zooming on autotracked objects. (default: shown below)
-        # A lower value will keep more of the scene in view around a tracked object.
-        # A higher value will zoom in more on a tracked object, but Frigate may lose tracking more quickly.
-        # The value should be between 0.1 and 0.75
-        zoom_factor: 0.3
-        # Optional: list of objects to track from labelmap.txt (default: shown below)
-        track:
-          - person
-        # Required: Begin automatically tracking an object when it enters any of the listed zones.
-        required_zones:
-          - zone_name
-        # Required: Name of ONVIF preset in camera's firmware to return to when tracking is over. (default: shown below)
-        return_preset: home
-        # Optional: Seconds to delay before returning to preset. (default: shown below)
-        timeout: 10
-        # Optional: Values generated automatically by a camera calibration. Do not modify these manually. (default: shown below)
-        movement_weights: []
-
-    # Optional: Configuration for how to sort the cameras in the Birdseye view.
-    birdseye:
-      # Optional: Adjust sort order of cameras in the Birdseye view. Larger numbers come later (default: shown below)
-      # By default the cameras are sorted alphabetically.
-      order: 0
-
-# Optional
-ui:
-  # Optional: Set the default live mode for cameras in the UI (default: shown below)
-  live_mode: mse
-  # Optional: Set a timezone to use in the UI (default: use browser local time)
-  # timezone: America/Denver
-  # Optional: Use an experimental recordings / camera view UI (default: shown below)
-  use_experimental: False
-  # Optional: Set the time format used.
-  # Options are browser, 12hour, or 24hour (default: shown below)
-  time_format: browser
-  # Optional: Set the date style for a specified length.
-  # Options are: full, long, medium, short
-  # Examples:
-  #    short: 2/11/23
-  #    medium: Feb 11, 2023
-  #    full: Saturday, February 11, 2023
-  # (default: shown below).
-  date_style: short
-  # Optional: Set the time style for a specified length.
-  # Options are: full, long, medium, short
-  # Examples:
-  #    short: 8:14 PM
-  #    medium: 8:15:22 PM
-  #    full: 8:15:22 PM Mountain Standard Time
-  # (default: shown below).
-  time_style: medium
-  # Optional: Ability to manually override the date / time styling to use strftime format
-  # https://www.gnu.org/software/libc/manual/html_node/Formatting-Calendar-Time.html
-  # possible values are shown above (default: not set)
-  strftime_fmt: "%Y/%m/%d %H:%M"
-
-# Optional: Telemetry configuration
-telemetry:
-  # Optional: Enabled network interfaces for bandwidth stats monitoring (default: empty list, let nethogs search all)
-  network_interfaces:
-    - eth
-    - enp
-    - eno
-    - ens
-    - wl
-    - lo
-  # Optional: Configure system stats
-  stats:
-    # Enable AMD GPU stats (default: shown below)
-    amd_gpu_stats: True
-    # Enable Intel GPU stats (default: shown below)
-    intel_gpu_stats: True
-    # Enable network bandwidth stats monitoring for camera ffmpeg processes, go2rtc, and object detectors. (default: shown below)
-    # NOTE: The container must either be privileged or have cap_net_admin, cap_net_raw capabilities enabled.
-    network_bandwidth: False
-  # Optional: Enable the latest version outbound check (default: shown below)
-  # NOTE: If you use the HomeAssistant integration, disabling this will prevent it from reporting new versions
-  version_check: True
+    motion:
+      mask:
+        - 0.000,0.427,0.002,0.000,0.999,0.000,0.999,0.781,0.885,0.456,0.700,0.424,0.701,0.311,0.507,0.294,0.453,0.347,0.451,0.400
+```
+
+### Home Assistant integrated Intel Mini PC with OpenVino
+
+- Single camera with 720p, 5fps stream for detect
+- MQTT connected to same mqtt server as home assistant
+- VAAPI hardware acceleration for decoding video
+- OpenVino detector
+- Save all video with any detectable motion for 7 days regardless of whether any objects were detected or not
+- Continue to keep all video if it was during any event for 30 days
+- Save snapshots for 30 days
+- Motion mask for the camera timestamp
+
+```yaml
+mqtt:
+  host: 192.168.X.X # <---- same mqtt broker that home assistant uses
+  user: mqtt-user
+  password: xxxxxxxxxx
+
+ffmpeg:
+  hwaccel_args: preset-vaapi
+
+detectors:
+  ov:
+    type: openvino
+    device: AUTO
+    model:
+      path: /openvino-model/ssdlite_mobilenet_v2.xml
+
+model:
+  width: 300
+  height: 300
+  input_tensor: nhwc
+  input_pixel_format: bgr
+  labelmap_path: /openvino-model/coco_91cl_bkgr.txt
+
+record:
+  enabled: True
+  retain:
+    days: 7
+    mode: motion
+  events:
+    retain:
+      default: 30
+      mode: motion
+
+snapshots:
+  enabled: True
+  retain:
+    default: 30
+
+cameras:
+  name_of_your_camera:
+    detect:
+      width: 1280
+      height: 720
+      fps: 5
+    ffmpeg:
+      inputs:
+        - path: rtsp://10.0.10.10:554/rtsp
+          roles:
+            - detect
+    motion:
+      mask:
+        - 0.000,0.427,0.002,0.000,0.999,0.000,0.999,0.781,0.885,0.456,0.700,0.424,0.701,0.311,0.507,0.294,0.453,0.347,0.451,0.400
 ```

docs/docs/configuration/live.md

@@ -3,17 +3,19 @@ id: live
 title: Live View
 ---
 
-Frigate has different live view options, some of which require the bundled `go2rtc` to be configured as shown in the [step by step guide](/guides/configuring_go2rtc).
+Frigate intelligently displays your camera streams on the Live view dashboard. Your camera images update once per minute when no detectable activity is occurring to conserve bandwidth and resources. As soon as any motion is detected, cameras seamlessly switch to a live stream.
 
-## Live View Options
+## Live View technologies
 
-Live view options can be selected while viewing the live stream. The options are:
+Frigate intelligently uses three different streaming technologies to display your camera streams on the dashboard and the single camera view, switching between available modes based on network bandwidth, player errors, or required features like two-way talk. The highest quality and fluency of the Live view requires the bundled `go2rtc` to be configured as shown in the [step by step guide](/guides/configuring_go2rtc).
 
-| Source | Latency | Frame Rate                            | Resolution     | Audio                        | Requires go2rtc | Other Limitations                                |
-| ------ | ------- | ------------------------------------- | -------------- | ---------------------------- | --------------- | ------------------------------------------------ |
-| jsmpeg | low     | same as `detect -> fps`, capped at 10 | same as detect | no                           | no              | none                                             |
-| mse    | low     | native                                | native         | yes (depends on audio codec) | yes             | iPhone requires iOS 17.1+, Firefox is h.264 only |
-| webrtc | lowest  | native                                | native         | yes (depends on audio codec) | yes             | requires extra config, doesn't support h.265     |
+The jsmpeg live view will use more browser and client GPU resources. Using go2rtc is highly recommended and will provide a superior experience.
+
+| Source | Latency | Frame Rate                            | Resolution | Audio                        | Requires go2rtc | Other Limitations                                                                    |
+| ------ | ------- | ------------------------------------- | ---------- | ---------------------------- | --------------- | ------------------------------------------------------------------------------------ |
+| jsmpeg | low     | same as `detect -> fps`, capped at 10 | 720p       | no                           | no              | resolution is configurable, but go2rtc is recommended if you want higher resolutions |
+| mse    | low     | native                                | native     | yes (depends on audio codec) | yes             | iPhone requires iOS 17.1+, Firefox is h.264 only                                     |
+| webrtc | lowest  | native                                | native     | yes (depends on audio codec) | yes             | requires extra config, doesn't support h.265                                         |
 
 ### Audio Support
 
@@ -79,7 +81,7 @@ WebRTC works by creating a TCP or UDP connection on port `8555`. However, it req
         - stun:8555
   ```
 
-- For access through Tailscale, the Frigate system's Tailscale IP must be added as a WebRTC candidate. Tailscale IPs all start with `100.`, and are reserved within the `100.0.0.0/8` CIDR block.
+- For access through Tailscale, the Frigate system's Tailscale IP must be added as a WebRTC candidate. Tailscale IPs all start with `100.`, and are reserved within the `100.64.0.0/10` CIDR block.
 
 :::tip
 

docs/docs/configuration/masks.md

@@ -3,41 +3,49 @@ id: masks
 title: Masks
 ---
 
-There are two types of masks available:
+## Motion masks
 
-**Motion masks**: Motion masks are used to prevent unwanted types of motion from triggering detection. Try watching the debug feed with `Motion Boxes` enabled to see what may be regularly detected as motion. For example, you want to mask out your timestamp, the sky, rooftops, etc. Keep in mind that this mask only prevents motion from being detected and does not prevent objects from being detected if object detection was started due to motion in unmasked areas. Motion is also used during object tracking to refine the object detection area in the next frame. Over masking will make it more difficult for objects to be tracked. To see this effect, create a mask, and then watch the video feed with `Motion Boxes` enabled again.
+Motion masks are used to prevent unwanted types of motion from triggering detection. Try watching the Debug feed (Settings --> Debug) with `Motion Boxes` enabled to see what may be regularly detected as motion. For example, you want to mask out your timestamp, the sky, rooftops, etc. Keep in mind that this mask only prevents motion from being detected and does not prevent objects from being detected if object detection was started due to motion in unmasked areas. Motion is also used during object tracking to refine the object detection area in the next frame. _Over-masking will make it more difficult for objects to be tracked._
 
-**Object filter masks**: Object filter masks are used to filter out false positives for a given object type based on location. These should be used to filter any areas where it is not possible for an object of that type to be. The bottom center of the detected object's bounding box is evaluated against the mask. If it is in a masked area, it is assumed to be a false positive. For example, you may want to mask out rooftops, walls, the sky, treetops for people. For cars, masking locations other than the street or your driveway will tell Frigate that anything in your yard is a false positive.
+See [further clarification](#further-clarification) below on why you may not want to use a motion mask.
+
+## Object filter masks
+
+Object filter masks are used to filter out false positives for a given object type based on location. These should be used to filter any areas where it is not possible for an object of that type to be. The bottom center of the detected object's bounding box is evaluated against the mask. If it is in a masked area, it is assumed to be a false positive. For example, you may want to mask out rooftops, walls, the sky, treetops for people. For cars, masking locations other than the street or your driveway will tell Frigate that anything in your yard is a false positive.
+
+Object filter masks can be used to filter out stubborn false positives in fixed locations. For example, the base of this tree may be frequently detected as a person. The following image shows an example of an object filter mask (shaded red area) over the location where the bottom center is typically located to filter out person detections in a precise location.
+
+![object mask](/img/bottom-center-mask.jpg)
+
+## Using the mask creator
 
 To create a poly mask:
 
 1. Visit the Web UI
-1. Click the camera you wish to create a mask for
-1. Select "Debug" at the top
-1. Expand the "Options" below the video feed
-1. Click "Mask & Zone creator"
-1. Click "Add" on the type of mask or zone you would like to create
-1. Click on the camera's latest image to create a masked area. The yaml representation will be updated in real-time
-1. When you've finished creating your mask, click "Copy" and paste the contents into your config file and restart Frigate
+2. Click/tap the gear icon and open "Settings"
+3. Select "Mask / zone editor"
+4. At the top right, select the camera you wish to create a mask or zone for
+5. Click the plus icon under the type of mask or zone you would like to create
+6. Click on the camera's latest image to create the points for a masked area. Click the first point again to close the polygon.
+7. When you've finished creating your mask, press Save.
+8. Restart Frigate to apply your changes.
 
-Example of a finished row corresponding to the below example image:
+Your config file will be updated with the relative coordinates of the mask/zone:
 
 ```yaml
 motion:
-  mask: "0,461,3,0,1919,0,1919,843,1699,492,1344,458,1346,336,973,317,869,375,866,432"
+  mask: "0.000,0.427,0.002,0.000,0.999,0.000,0.999,0.781,0.885,0.456,0.700,0.424,0.701,0.311,0.507,0.294,0.453,0.347,0.451,0.400"
 ```
 
-Multiple masks can be listed.
+Multiple masks can be listed in your config.
 
 ```yaml
 motion:
   mask:
-    - 458,1346,336,973,317,869,375,866,432
-    - 0,461,3,0,1919,0,1919,843,1699,492,1344
+    - 0.239,1.246,0.175,0.901,0.165,0.805,0.195,0.802
+    - 0.000,0.427,0.002,0.000,0.999,0.000,0.999,0.781,0.885,0.456
 ```
 
-![poly](/img/example-mask-poly-min.png)
-
 ### Further Clarification
 
 This is a response to a [question posed on reddit](https://www.reddit.com/r/homeautomation/comments/ppxdve/replacing_my_doorbell_with_a_security_camera_a_6/hd876w4?utm_source=share&utm_medium=web2x&context=3):
@@ -70,7 +78,7 @@ It is, but the definition of "unnecessary" varies. I want to ignore areas of mot
 
 > For me, giving my masks ANY padding results in a lot of people detection I'm not interested in. I live in the city and catch a lot of the sidewalk on my camera. People walk by my front door all the time and the margin between the sidewalk and actually walking onto my stoop is very thin, so I basically have everything but the exact contours of my stoop masked out. This results in very tidy detections but this info keeps throwing me off. Am I just overthinking it?
 
-This is what `required_zones` are for. You should define a zone (remember this is evaluated based on the bottom center of the bounding box) and make it required to save snapshots and clips (now events in 0.9.0). You can also use this in your conditions for a notification.
+This is what `required_zones` are for. You should define a zone (remember this is evaluated based on the bottom center of the bounding box) and make it required to save snapshots and clips (previously events in 0.9.0 to 0.13.0 and review items in 0.14.0 and later). You can also use this in your conditions for a notification.
 
 > Maybe my specific situation just warrants this. I've just been having a hard time understanding the relevance of this information - it seems to be that it's exactly what would be expected when "masking out" an area of ANY image.
 

docs/docs/configuration/motion_detection.md

@@ -17,13 +17,11 @@ Before tuning motion it is important to understand the goal. In an optimal confi
 
 ## Create Motion Masks
 
-First, mask areas with regular motion not caused by the objects you want to detect. The best way to find candidates for motion masks is by watching the debug stream with motion boxes enabled. Good use cases for motion masks are timestamps or tree limbs and large bushes that regularly move due to wind. When possible, avoid creating motion masks that would block motion detection for objects you want to track **even if they are in locations where you don't want events**. Motion masks should not be used to avoid detecting objects in specific areas. More details can be found [in the masks docs.](/configuration/masks.md). 
+First, mask areas with regular motion not caused by the objects you want to detect. The best way to find candidates for motion masks is by watching the debug stream with motion boxes enabled. Good use cases for motion masks are timestamps or tree limbs and large bushes that regularly move due to wind. When possible, avoid creating motion masks that would block motion detection for objects you want to track **even if they are in locations where you don't want events**. Motion masks should not be used to avoid detecting objects in specific areas. More details can be found [in the masks docs.](/configuration/masks.md).
 
 ## Prepare For Testing
 
-The easiest way to tune motion detection is to do it live, have one window / screen open with the frigate debug view and motion boxes enabled with another window / screen open allowing for configuring the motion settings. It is recommended to use Home Assistant or MQTT as they offer live configuration of some motion settings meaning that Frigate does not need to be restarted when values are changed.
-
-In Home Assistant the `Improve Contrast`, `Contour Area`, and `Threshold` configuration entities are disabled by default but can easily be enabled and used to tune live, otherwise MQTT can be used.
+The easiest way to tune motion detection is to use the Frigate UI under Settings > Motion Tuner. This screen allows the changing of motion detection values live to easily see the immediate effect on what is detected as motion.
 
 ## Tuning Motion Detection During The Day
 
@@ -37,7 +35,7 @@ Remember that motion detection is just used to determine when object detection s
 
 ### Threshold
 
-The threshold value dictates how much of a change in a pixels luminance is required to be considered motion. 
+The threshold value dictates how much of a change in a pixels luminance is required to be considered motion.
 
 ```yaml
 # default threshold value
@@ -69,7 +67,7 @@ motion:
 
 Once the threshold calculation is run, the pixels that have changed are grouped together. The contour area value is used to decide which groups of changed pixels qualify as motion. Smaller values are more sensitive meaning people that are far away, small animals, etc. are more likely to be detected as motion, but it also means that small changes in shadows, leaves, etc. are detected as motion. Higher values are less sensitive meaning these things won't be detected as motion but with the risk that desired motion won't be detected until closer to the camera.
 
-Watching the motion boxes in the debug view, adjust the contour area until there are no motion boxes smaller than the smallest you'd expect frigate to detect something moving. 
+Watching the motion boxes in the debug view, adjust the contour area until there are no motion boxes smaller than the smallest you'd expect frigate to detect something moving.
 
 ### Improve Contrast
 
@@ -77,7 +75,7 @@ At this point if motion is working as desired there is no reason to continue wit
 
 ## Tuning Motion Detection During The Night
 
-Once daytime motion detection is tuned, there is a chance that the settings will work well for motion detection during the night as well. If this is the case then the preferred settings can be written to the config file and left alone. 
+Once daytime motion detection is tuned, there is a chance that the settings will work well for motion detection during the night as well. If this is the case then the preferred settings can be written to the config file and left alone.
 
 However, if the preferred day settings do not work well at night it is recommended to use HomeAssistant or some other solution to automate changing the settings. That way completely separate sets of motion settings can be used for optimal day and night motion detection.
 

docs/docs/configuration/object_detectors.md

@@ -11,6 +11,12 @@ Frigate provides the following builtin detector types: `cpu`, `edgetpu`, `openvi
 
 The CPU detector type runs a TensorFlow Lite model utilizing the CPU without hardware acceleration. It is recommended to use a hardware accelerated detector type instead for better performance. To configure a CPU based detector, set the `"type"` attribute to `"cpu"`.
 
+:::tip
+
+If you do not have GPU or Edge TPU hardware, using the [OpenVINO Detector](#openvino-detector) is often more efficient than using the CPU detector.
+
+:::
+
 The number of threads used by the interpreter can be specified using the `"num_threads"` attribute, and defaults to `3.`
 
 A TensorFlow Lite model is provided in the container at `/cpu_model.tflite` and is used by this detector type by default. To provide your own model, bind mount the file into the container and provide the path with `model.path`.
@@ -29,17 +35,17 @@ detectors:
 
 When using CPU detectors, you can add one CPU detector per camera. Adding more detectors than the number of cameras should not improve performance.
 
-## Edge-TPU Detector
+## Edge TPU Detector
 
-The EdgeTPU detector type runs a TensorFlow Lite model utilizing the Google Coral delegate for hardware acceleration. To configure an EdgeTPU detector, set the `"type"` attribute to `"edgetpu"`.
+The Edge TPU detector type runs a TensorFlow Lite model utilizing the Google Coral delegate for hardware acceleration. To configure an Edge TPU detector, set the `"type"` attribute to `"edgetpu"`.
 
-The EdgeTPU device can be specified using the `"device"` attribute according to the [Documentation for the TensorFlow Lite Python API](https://coral.ai/docs/edgetpu/multiple-edgetpu/#using-the-tensorflow-lite-python-api). If not set, the delegate will use the first device it finds.
+The Edge TPU device can be specified using the `"device"` attribute according to the [Documentation for the TensorFlow Lite Python API](https://coral.ai/docs/edgetpu/multiple-edgetpu/#using-the-tensorflow-lite-python-api). If not set, the delegate will use the first device it finds.
 
 A TensorFlow Lite model is provided in the container at `/edgetpu_model.tflite` and is used by this detector type by default. To provide your own model, bind mount the file into the container and provide the path with `model.path`.
 
 :::tip
 
-See [common Edge-TPU troubleshooting steps](/troubleshooting/edgetpu) if the EdgeTPu is not detected.
+See [common Edge TPU troubleshooting steps](/troubleshooting/edgetpu) if the Edge TPU is not detected.
 
 :::
 
@@ -75,6 +81,15 @@ detectors:
     device: ""
 ```
 
+### Single PCIE/M.2 Coral
+
+```yaml
+detectors:
+  coral:
+    type: edgetpu
+    device: pci
+```
+
 ### Multiple PCIE/M.2 Corals
 
 ```yaml
@@ -101,11 +116,15 @@ detectors:
 
 ## OpenVINO Detector
 
-The OpenVINO detector type runs an OpenVINO IR model on Intel CPU, GPU and VPU hardware. To configure an OpenVINO detector, set the `"type"` attribute to `"openvino"`.
+The OpenVINO detector type runs an OpenVINO IR model on AMD and Intel CPUs, Intel GPUs and Intel VPU hardware. To configure an OpenVINO detector, set the `"type"` attribute to `"openvino"`.
 
-The OpenVINO device to be used is specified using the `"device"` attribute according to the naming conventions in the [Device Documentation](https://docs.openvino.ai/latest/openvino_docs_OV_UG_Working_with_devices.html). Other supported devices could be `AUTO`, `CPU`, `GPU`, `MYRIAD`, etc. If not specified, the default OpenVINO device will be selected by the `AUTO` plugin.
+The OpenVINO device to be used is specified using the `"device"` attribute according to the naming conventions in the [Device Documentation](https://docs.openvino.ai/2024/openvino-workflow/running-inference/inference-devices-and-modes.html). The most common devices are `CPU` and `GPU`. Currently, there is a known issue with using `AUTO`. For backwards compatibility, Frigate will attempt to use `GPU` if `AUTO` is set in your configuration.
 
-OpenVINO is supported on 6th Gen Intel platforms (Skylake) and newer. A supported Intel platform is required to use the `GPU` device with OpenVINO. The `MYRIAD` device may be run on any platform, including Arm devices. For detailed system requirements, see [OpenVINO System Requirements](https://www.intel.com/content/www/us/en/developer/tools/openvino-toolkit/system-requirements.html)
+OpenVINO is supported on 6th Gen Intel platforms (Skylake) and newer. It will also run on AMD CPUs despite having no official support for it. A supported Intel platform is required to use the `GPU` device with OpenVINO. For detailed system requirements, see [OpenVINO System Requirements](https://docs.openvino.ai/2024/about-openvino/release-notes-openvino/system-requirements.html)
+
+### Supported Models
+
+#### SSDLite MobileNet v2
 
 An OpenVINO model is provided in the container at `/openvino-model/ssdlite_mobilenet_v2.xml` and is used by this detector type by default. The model comes from Intel's Open Model Zoo [SSDLite MobileNet V2](https://github.com/openvinotoolkit/open_model_zoo/tree/master/models/public/ssdlite_mobilenet_v2) and is converted to an FP16 precision IR model. Use the model configuration shown below when using the OpenVINO detector with the default model.
 
@@ -113,70 +132,56 @@ An OpenVINO model is provided in the container at `/openvino-model/ssdlite_mobil
 detectors:
   ov:
     type: openvino
-    device: AUTO
-    model:
-      path: /openvino-model/ssdlite_mobilenet_v2.xml
+    device: GPU
 
 model:
   width: 300
   height: 300
   input_tensor: nhwc
   input_pixel_format: bgr
+  path: /openvino-model/ssdlite_mobilenet_v2.xml
   labelmap_path: /openvino-model/coco_91cl_bkgr.txt
 ```
 
-This detector also supports some YOLO variants: YOLOX, YOLOv5, and YOLOv8 specifically. Other YOLO variants are not officially supported/tested. Frigate does not come with any yolo models preloaded, so you will need to supply your own models. This detector has been verified to work with the [yolox_tiny](https://github.com/openvinotoolkit/open_model_zoo/tree/master/models/public/yolox-tiny) model from Intel's Open Model Zoo. You can follow [these instructions](https://github.com/openvinotoolkit/open_model_zoo/tree/master/models/public/yolox-tiny#download-a-model-and-convert-it-into-openvino-ir-format) to retrieve the OpenVINO-compatible `yolox_tiny` model. Make sure that the model input dimensions match the `width` and `height` parameters, and `model_type` is set accordingly. See [Full Configuration Reference](/configuration/index.md#full-configuration-reference) for a list of possible `model_type` options. Below is an example of how `yolox_tiny` can be used in Frigate:
+#### YOLOX
+
+This detector also supports YOLOX. Frigate does not come with any YOLOX models preloaded, so you will need to supply your own models.
+
+#### YOLO-NAS
+
+[YOLO-NAS](https://github.com/Deci-AI/super-gradients/blob/master/YOLONAS.md) models are supported, but not included by default. You can build and download a compatible model with pre-trained weights using [this notebook](https://github.com/frigate/blob/dev/notebooks/YOLO_NAS_Pretrained_Export.ipynb) [![Open In Colab](https://colab.research.google.com/assets/colab-badge.svg)](https://colab.research.google.com/github/blakeblackshear/frigate/blob/dev/notebooks/YOLO_NAS_Pretrained_Export.ipynb).
+
+:::warning
+
+The pre-trained YOLO-NAS weights from DeciAI are subject to their license and can't be used commercially. For more information, see: https://docs.deci.ai/super-gradients/latest/LICENSE.YOLONAS.html
+
+:::
+
+The input image size in this notebook is set to 320x320. This results in lower CPU usage and faster inference times without impacting performance in most cases due to the way Frigate crops video frames to areas of interest before running detection. The notebook and config can be updated to 640x640 if desired.
+
+After placing the downloaded onnx model in your config folder, you can use the following configuration:
 
 ```yaml
 detectors:
   ov:
     type: openvino
-    device: AUTO
-    model:
-      path: /path/to/yolox_tiny.xml
+    device: GPU
 
 model:
-  width: 416
-  height: 416
+  model_type: yolonas
+  width: 320 # <--- should match whatever was set in notebook
+  height: 320 # <--- should match whatever was set in notebook
   input_tensor: nchw
   input_pixel_format: bgr
-  model_type: yolox
-  labelmap_path: /path/to/coco_80cl.txt
+  path: /config/yolo_nas_s.onnx
+  labelmap_path: /labelmap/coco-80.txt
 ```
 
-### Intel NCS2 VPU and Myriad X Setup
-
-Intel produces a neural net inference accelleration chip called Myriad X. This chip was sold in their Neural Compute Stick 2 (NCS2) which has been discontinued. If intending to use the MYRIAD device for accelleration, additional setup is required to pass through the USB device. The host needs a udev rule installed to handle the NCS2 device.
-
-```bash
-sudo usermod -a -G users "$(whoami)"
-cat <<EOF > 97-myriad-usbboot.rules
-SUBSYSTEM=="usb", ATTRS{idProduct}=="2485", ATTRS{idVendor}=="03e7", GROUP="users", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEM=="usb", ATTRS{idProduct}=="f63b", ATTRS{idVendor}=="03e7", GROUP="users", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1"
-EOF
-sudo cp 97-myriad-usbboot.rules /etc/udev/rules.d/
-sudo udevadm control --reload-rules
-sudo udevadm trigger
-```
-
-Additionally, the Frigate docker container needs to run with the following configuration:
-
-```bash
---device-cgroup-rule='c 189:\* rmw' -v /dev/bus/usb:/dev/bus/usb
-```
-
-or in your compose file:
-
-```yml
-device_cgroup_rules:
-  - "c 189:* rmw"
-volumes:
-  - /dev/bus/usb:/dev/bus/usb
-```
+Note that the labelmap uses a subset of the complete COCO label set that has only 80 objects.
 
 ## NVidia TensorRT Detector
 
-NVidia GPUs may be used for object detection using the TensorRT libraries. Due to the size of the additional libraries, this detector is only provided in images with the `-tensorrt` tag suffix. This detector is designed to work with Yolo models for object detection.
+Nvidia GPUs may be used for object detection using the TensorRT libraries. Due to the size of the additional libraries, this detector is only provided in images with the `-tensorrt` tag suffix, e.g. `ghcr.io/blakeblackshear/frigate:stable-tensorrt`. This detector is designed to work with Yolo models for object detection.
 
 ### Minimum Hardware Support
 
@@ -198,7 +203,7 @@ There are improved capabilities in newer GPU architectures that TensorRT can ben
 
 The model used for TensorRT must be preprocessed on the same hardware platform that they will run on. This means that each user must run additional setup to generate a model file for the TensorRT library. A script is included that will build several common models.
 
-The Frigate image will generate model files during startup if the specified model is not found.  Processed models are stored in the `/config/model_cache` folder.  Typically the `/config` path is mapped to a directory on the host already and the `model_cache` does not need to be mapped separately unless the user wants to store it in a different location on the host.
+The Frigate image will generate model files during startup if the specified model is not found. Processed models are stored in the `/config/model_cache` folder. Typically the `/config` path is mapped to a directory on the host already and the `model_cache` does not need to be mapped separately unless the user wants to store it in a different location on the host.
 
 By default, the `yolov7-320` model will be generated, but this can be overridden by specifying the `YOLO_MODELS` environment variable in Docker. One or more models may be listed in a comma-separated format, and each one will be generated. To select no model generation, set the variable to an empty string, `YOLO_MODELS=""`. Models will only be generated if the corresponding `{model}.trt` file is not present in the `model_cache` folder, so you can force a model to be regenerated by deleting it from your Frigate data folder.
 
@@ -245,7 +250,7 @@ frigate:
     - USE_FP16=false
 ```
 
-If you have multiple GPUs passed through to Frigate, you can specify which one to use for the model conversion.  The conversion script will use the first visible GPU, however in systems with mixed GPU models you may not want to use the default index for object detection.  Add the `TRT_MODEL_PREP_DEVICE` environment variable to select a specific GPU.
+If you have multiple GPUs passed through to Frigate, you can specify which one to use for the model conversion. The conversion script will use the first visible GPU, however in systems with mixed GPU models you may not want to use the default index for object detection. Add the `TRT_MODEL_PREP_DEVICE` environment variable to select a specific GPU.
 
 ```yml
 frigate:
@@ -255,7 +260,7 @@ frigate:
 
 ### Configuration Parameters
 
-The TensorRT detector can be selected by specifying `tensorrt` as the model type. The GPU will need to be passed through to the docker container using the same methods described in the [Hardware Acceleration](hardware_acceleration.md#nvidia-gpu) section. If you pass through multiple GPUs, you can select which GPU is used for a detector with the `device` configuration parameter. The `device` parameter is an integer value of the GPU index, as shown by `nvidia-smi` within the container.
+The TensorRT detector can be selected by specifying `tensorrt` as the model type. The GPU will need to be passed through to the docker container using the same methods described in the [Hardware Acceleration](hardware_acceleration.md#nvidia-gpus) section. If you pass through multiple GPUs, you can select which GPU is used for a detector with the `device` configuration parameter. The `device` parameter is an integer value of the GPU index, as shown by `nvidia-smi` within the container.
 
 The TensorRT detector uses `.trt` model files that are located in `/config/model_cache/tensorrt` by default. These model path and dimensions used will depend on which model you have generated.
 
@@ -295,72 +300,78 @@ Replace `<your_codeproject_ai_server_ip>` and `<port>` with the IP address and p
 
 To verify that the integration is working correctly, start Frigate and observe the logs for any error messages related to CodeProject.AI. Additionally, you can check the Frigate web interface to see if the objects detected by CodeProject.AI are being displayed and tracked properly.
 
-
 # Community Supported Detectors
 
-## Rockchip RKNN-Toolkit-Lite2
+## Rockchip platform
+
+Hardware accelerated object detection is supported on the following SoCs:
 
-This detector is only available if one of the following Rockchip SoCs is used:
-- RK3588/RK3588S
-- RK3568
-- RK3566
 - RK3562
+- RK3566
+- RK3568
+- RK3576
+- RK3588
 
-These SoCs come with a NPU that will highly speed up detection.
+This implementation uses the [Rockchip's RKNN-Toolkit2](https://github.com/airockchip/rknn-toolkit2/), version v2.0.0.beta0. Currently, only [Yolo-NAS](https://github.com/Deci-AI/super-gradients/blob/master/YOLONAS.md) is supported as object detection model.
 
-### Setup
+### Prerequisites
 
-Use a frigate docker image with `-rk` suffix and enable privileged mode by adding the `--privileged` flag to your docker run command or `privileged: true` to your `docker-compose.yml` file.
+Make sure to follow the [Rockchip specific installation instrucitions](/frigate/installation#rockchip-platform).
 
 ### Configuration
 
-This `config.yml` shows all relevant options to configure the detector and explains them. All values shown are the default values (except for one). Lines that are required at least to use the detector are labeled as required, all other lines are optional.
+This `config.yml` shows all relevant options to configure the detector and explains them. All values shown are the default values (except for two). Lines that are required at least to use the detector are labeled as required, all other lines are optional.
 
 ```yaml
-detectors:                            # required
-  rknn:                               # required
-    type: rknn                        # required
-    # core mask for npu
-    core_mask: 0
+detectors: # required
+  rknn: # required
+    type: rknn # required
+    # number of NPU cores to use
+    # 0 means choose automatically
+    # increase for better performance if you have a multicore NPU e.g. set to 3 on rk3588
+    num_cores: 0
 
-model:                                # required
-  # name of yolov8 model or path to your own .rknn model file
+model: # required
+  # name of model (will be automatically downloaded) or path to your own .rknn model file
   # possible values are:
-  # - default-yolov8n
-  # - default-yolov8s
-  # - default-yolov8m
-  # - default-yolov8l
-  # - default-yolov8x
-  # - /config/model_cache/rknn/your_custom_model.rknn
-  path: default-yolov8n
+  # - deci-fp16-yolonas_s
+  # - deci-fp16-yolonas_m
+  # - deci-fp16-yolonas_l
+  # - /config/model_cache/your_custom_model.rknn
+  path: deci-fp16-yolonas_s
   # width and height of detection frames
   width: 320
   height: 320
   # pixel format of detection frame
-  # default value is rgb but yolov models usually use bgr format
-  input_pixel_format: bgr             # required
+  # default value is rgb but yolo models usually use bgr format
+  input_pixel_format: bgr # required
   # shape of detection frame
   input_tensor: nhwc
+  # needs to be adjusted to model, see below
+  labelmap_path: /labelmap.txt # required
 ```
 
-Explanation for rknn specific options:
-- **core mask** controls which cores of your NPU should be used. This option applies only to SoCs with a multicore NPU (at the time of writing this in only the RK3588/S). The easiest way is to pass the value as a binary number. To do so, use the prefix `0b` and write a `0` to disable a core and a `1` to enable a core, whereas the last digit coresponds to core0, the second last to core1, etc. You also have to use the cores in ascending order (so you can't use core0 and core2; but you can use core0 and core1). Enabling more cores can reduce the inference speed, especially when using bigger models (see section below). Examples:
-  - `core_mask: 0b000` or just `core_mask: 0` let the NPU decide which cores should be used. Default and recommended value.
-  - `core_mask: 0b001` use only core0.
-  - `core_mask: 0b011` use core0 and core1.
-  - `core_mask: 0b110` use core1 and core2. **This does not** work, since core0 is disabled.
+The correct labelmap must be loaded for each model. If you use a custom model (see notes below), you must make sure to provide the correct labelmap. The table below lists the correct paths for the bundled models:
+
+| `path`                | `labelmap_path`       |
+| --------------------- | --------------------- |
+| deci-fp16-yolonas\_\* | /labelmap/coco-80.txt |
 
 ### Choosing a model
 
-There are 5 default yolov8 models that differ in size and therefore load the NPU more or less. In ascending order, with the top one being the smallest and least computationally intensive model:
+:::warning
 
-| Model   | Size in mb |
-| ------- | ---------- |
-| yolov8n | 9          |
-| yolov8s | 25         |
-| yolov8m | 54         |
-| yolov8l | 90         |
-| yolov8x | 136        |
+The pre-trained YOLO-NAS weights from DeciAI are subject to their license and can't be used commercially. For more information, see: https://docs.deci.ai/super-gradients/latest/LICENSE.YOLONAS.html
+
+:::
+
+The inference time was determined on a rk3588 with 3 NPU cores.
+
+| Model               | Size in mb | Inference time in ms |
+| ------------------- | ---------- | -------------------- |
+| deci-fp16-yolonas_s | 24         | 25                   |
+| deci-fp16-yolonas_m | 62         | 35                   |
+| deci-fp16-yolonas_l | 81         | 45                   |
 
 :::tip
 
@@ -373,25 +384,5 @@ $ cat /sys/kernel/debug/rknpu/load
 
 :::
 
-- By default the rknn detector uses the yolov8n model (`model: path: default-yolov8n`). This model comes with the image, so no further steps than those mentioned above are necessary.
-- If you want to use a more precise model, you can pass `default-yolov8s`, `default-yolov8m`, `default-yolov8l` or `default-yolov8x` as `model: path:` option.
-  - If the model does not exist, it will be automatically downloaded to `/config/model_cache/rknn`.
-  - If your server has no internet connection, you can download the model from [this Github repository](https://github.com/MarcA711/rknn-models/releases) using another device and place it in the `config/model_cache/rknn` on your system.
-- Finally, you can also provide your own model. Note that only yolov8 models are currently supported. Moreover, you will need to convert your model to the rknn format using `rknn-toolkit2` on a x86 machine. Afterwards, you can place your `.rknn` model file in the `config/model_cache/rknn` directory on your system. Then you need to pass the path to your model using the `path` option of your `model` block like this:
-```yaml
-model:
-  path: /config/model_cache/rknn/my-rknn-model.rknn
-```
-
-:::tip
-
-When you have a multicore NPU, you can enable all cores to reduce inference times. You should consider activating all cores if you use a larger model like yolov8l. If your NPU has 3 cores (like rk3588/S SoCs), you can enable all 3 cores using:
-
-```yaml
-detectors:
-  rknn:
-    type: rknn
-    core_mask: 0b111
-```
-
-:::
+- All models are automatically downloaded and stored in the folder `config/model_cache/rknn_cache`. After upgrading Frigate, you should remove older models to free up space.
+- You can also provide your own `.rknn` model. You should not save your own models in the `rknn_cache` folder, store them directly in the `model_cache` folder or another subfolder. To convert a model to `.rknn` format see the `rknn-toolkit2` (requires a x86 machine). Note, that there is only post-processing for the supported models.

docs/docs/configuration/object_filters.md

@@ -1,8 +1,10 @@
 ---
-id: false_positives
-title: Reducing false positives
+id: object_filters
+title: Filters
 ---
 
+There are several types of object filters that can be used to reduce false positive rates.
+
 ## Object Scores
 
 For object filters in your configuration, any single detection below `min_score` will be ignored as a false positive. `threshold` is based on the median of the history of scores (padded to 3 values) for a tracked object. Consider the following frames when `min_score` is set to 0.6 and threshold is set to 0.85:
@@ -18,6 +20,8 @@ For object filters in your configuration, any single detection below `min_score`
 
 In frame 2, the score is below the `min_score` value, so Frigate ignores it and it becomes a 0.0. The computed score is the median of the score history (padding to at least 3 values), and only when that computed score crosses the `threshold` is the object marked as a true positive. That happens in frame 4 in the example.
 
+show image of snapshot vs event with differing scores
+
 ### Minimum Score
 
 Any detection below `min_score` will be immediately thrown out and never tracked because it is considered a false positive. If `min_score` is too low then false positives may be detected and tracked which can confuse the object tracker and may lead to wasted resources. If `min_score` is too high then lower scoring true positives like objects that are further away or partially occluded may be thrown out which can also confuse the tracker and cause valid events to be lost or disjointed.
@@ -32,11 +36,17 @@ False positives can also be reduced by filtering a detection based on its shape.
 
 ### Object Area
 
-`min_area` and `max_area` filter on the area of an objects bounding box in pixels and can be used to reduce false positives that are outside the range of expected sizes. For example when a leaf is detected as a dog or when a large tree is detected as a person, these can be reduced by adding a `min_area` / `max_area` filter. The recordings timeline can be used to determine the area of the bounding box in that frame by selecting a timeline item then mousing over or tapping the red box.
+`min_area` and `max_area` filter on the area of an objects bounding box in pixels and can be used to reduce false positives that are outside the range of expected sizes. For example when a leaf is detected as a dog or when a large tree is detected as a person, these can be reduced by adding a `min_area` / `max_area` filter.
 
 ### Object Proportions
 
-`min_ratio` and `max_ratio` filter on the ratio of width / height of an objects bounding box and can be used to reduce false positives. For example if a false positive is detected as very tall for a dog which is often wider, a `min_ratio` filter can be used to filter out these false positives.
+`min_ratio` and `max_ratio` values are compared against a given detected object's width/height ratio (in pixels). If the ratio is outside this range, the object will be ignored as a false positive. This allows objects that are proportionally too short-and-wide (higher ratio) or too tall-and-narrow (smaller ratio) to be ignored.
+
+:::info
+
+Conceptually, a ratio of 1 is a square, 0.5 is a "tall skinny" box, and 2 is a "wide flat" box. If `min_ratio` is 1.0, any object that is taller than it is wide will be ignored. Similarly, if `max_ratio` is 1.0, then any object that is wider than it is tall will be ignored.
+
+:::
 
 ## Other Tools
 

docs/docs/configuration/objects.md

@@ -1,15 +1,16 @@
 ---
 id: objects
-title: Objects
+title: Available Objects
 ---
 
 import labels from "../../../labelmap.txt";
 
 Frigate includes the object models listed below from the Google Coral test data.
 
-Please note: 
- - `car` is listed twice because `truck` has been renamed to `car` by default. These object types are frequently confused.
- - `person` is the only tracked object by default. See the [full configuration reference](index.md#full-configuration-reference) for an example of expanding the list of tracked objects.
+Please note:
+
+- `car` is listed twice because `truck` has been renamed to `car` by default. These object types are frequently confused.
+- `person` is the only tracked object by default. See the [full configuration reference](reference.md) for an example of expanding the list of tracked objects.
 
 <ul>
   {labels.split("\n").map((label) => (

docs/docs/configuration/record.md

@@ -3,19 +3,69 @@ id: record
 title: Recording
 ---
 
-Recordings can be enabled and are stored at `/media/frigate/recordings`. The folder structure for the recordings is `YYYY-MM-DD/HH/<camera_name>/MM.SS.mp4`. These recordings are written directly from your camera stream without re-encoding. Each camera supports a configurable retention policy in the config. Frigate chooses the largest matching retention value between the recording retention and the event retention when determining if a recording should be removed.
+Recordings can be enabled and are stored at `/media/frigate/recordings`. The folder structure for the recordings is `YYYY-MM-DD/HH/<camera_name>/MM.SS.mp4` in **UTC time**. These recordings are written directly from your camera stream without re-encoding. Each camera supports a configurable retention policy in the config. Frigate chooses the largest matching retention value between the recording retention and the event retention when determining if a recording should be removed.
 
 New recording segments are written from the camera stream to cache, they are only moved to disk if they match the setup recording retention policy.
 
 H265 recordings can be viewed in Chrome 108+, Edge and Safari only. All other browsers require recordings to be encoded with H264.
 
+## Common recording configurations
+
+### Most conservative: Ensure all video is saved
+
+For users deploying Frigate in environments where it is important to have contiguous video stored even if there was no detectable motion, the following config will store all video for 3 days. After 3 days, only video containing motion and overlapping with events will be retained until 30 days have passed.
+
+```yaml
+record:
+  enabled: True
+  retain:
+    days: 3
+    mode: all
+  events:
+    retain:
+      default: 30
+      mode: motion
+```
+
+### Reduced storage: Only saving video when motion is detected
+
+In order to reduce storage requirements, you can adjust your config to only retain video where motion was detected.
+
+```yaml
+record:
+  enabled: True
+  retain:
+    days: 3
+    mode: motion
+  events:
+    retain:
+      default: 30
+      mode: motion
+```
+
+### Minimum: Events only
+
+If you only want to retain video that occurs during an event, this config will discard video unless an event is ongoing.
+
+```yaml
+record:
+  enabled: True
+  retain:
+    days: 0
+    mode: all
+  events:
+    retain:
+      default: 30
+      mode: motion
+```
+
 ## Will Frigate delete old recordings if my storage runs out?
 
 As of Frigate 0.12 if there is less than an hour left of storage, the oldest 2 hours of recordings will be deleted.
 
 ## Configuring Recording Retention
 
-Frigate supports both 24/7 and event based recordings with separate retention modes and retention periods.
+Frigate supports both continuous and event based recordings with separate retention modes and retention periods.
 
 :::tip
 
@@ -23,18 +73,18 @@ Retention configs support decimals meaning they can be configured to retain `0.5
 
 :::
 
-### 24/7 Recording
+### Continuous Recording
 
-The number of days to retain 24/7 recordings can be set via the following config where X is a number, by default 24/7 recording is disabled.
+The number of days to retain continuous recordings can be set via the following config where X is a number, by default continuous recording is disabled.
 
 ```yaml
 record:
   enabled: True
   retain:
-    days: 1 # <- number of days to keep 24/7 recordings
+    days: 1 # <- number of days to keep continuous recordings
 ```
 
-24/7 recording supports different retention modes [which are described below](#what-do-the-different-retain-modes-mean)
+Continuous recording supports different retention modes [which are described below](#what-do-the-different-retain-modes-mean)
 
 ### Event Recording
 
@@ -54,19 +104,22 @@ This configuration will retain recording segments that overlap with events and h
 
 ## What do the different retain modes mean?
 
-Frigate saves from the stream with the `record` role in 10 second segments. These options determine which recording segments are kept for 24/7 recording (but can also affect events).
+Frigate saves from the stream with the `record` role in 10 second segments. These options determine which recording segments are kept for continuous recording (but can also affect events).
+
+Let's say you have Frigate configured so that your doorbell camera would retain the last **2** days of continuous recording.
 
-Let's say you have Frigate configured so that your doorbell camera would retain the last **2** days of 24/7 recording.
 - With the `all` option all 48 hours of those two days would be kept and viewable.
 - With the `motion` option the only parts of those 48 hours would be segments that Frigate detected motion. This is the middle ground option that won't keep all 48 hours, but will likely keep all segments of interest along with the potential for some extra segments.
 - With the `active_objects` option the only segments that would be kept are those where there was a true positive object that was not considered stationary.
 
 The same options are available with events. Let's consider a scenario where you drive up and park in your driveway, go inside, then come back out 4 hours later.
+
 - With the `all` option all segments for the duration of the event would be saved for the event. This event would have 4 hours of footage.
 - With the `motion` option all segments for the duration of the event with motion would be saved. This means any segment where a car drove by in the street, person walked by, lighting changed, etc. would be saved.
 - With the `active_objects` it would only keep segments where the object was active. In this case the only segments that would be saved would be the ones where the car was driving up, you going inside, you coming outside, and the car driving away. Essentially reducing the 4 hours to a minute or two of event footage.
 
 A configuration example of the above retain modes where all `motion` segments are stored for 7 days and `active objects` are stored for 14 days would be as follows:
+
 ```yaml
 record:
   enabled: True
@@ -78,11 +131,13 @@ record:
       default: 14
       mode: active_objects
 ```
+
 The above configuration example can be added globally or on a per camera basis.
 
 ### Object Specific Retention
 
 You can also set specific retention length for an object type. The below configuration example builds on from above but also specifies that recordings of dogs only need to be kept for 2 days and recordings of cars should be kept for 7 days.
+
 ```yaml
 record:
   enabled: True
@@ -98,13 +153,35 @@ record:
         car: 7
 ```
 
-## Can I have "24/7" recordings, but only at certain times?
+## Can I have "continuous" recordings, but only at certain times?
 
 Using Frigate UI, HomeAssistant, or MQTT, cameras can be automated to only record in certain situations or at certain times.
 
 ## How do I export recordings?
 
-The export page in the Frigate WebUI allows for exporting real time clips with a designated start and stop time as well as exporting a time-lapse for a designated start and stop time. These exports can take a while so it is important to leave the file until it is no longer in progress.
+Footage can be exported from Frigate by right-clicking (desktop) or long pressing (mobile) on a review item in the Review pane or by clicking the Export button in the History view. Exported footage is then organized and searchable through the Export view, accessible from the main navigation bar.
+
+### Time-lapse export
+
+Time lapse exporting is available only via the [HTTP API](../integrations/api.md#post-apiexportcamerastartstart-timestampendend-timestamp).
+
+When exporting a time-lapse the default speed-up is 25x with 30 FPS. This means that every 25 seconds of (real-time) recording is condensed into 1 second of time-lapse video (always without audio) with a smoothness of 30 FPS.
+
+To configure the speed-up factor, the frame rate and further custom settings, the configuration parameter `timelapse_args` can be used. The below configuration example would change the time-lapse speed to 60x (for fitting 1 hour of recording into 1 minute of time-lapse) with 25 FPS:
+
+```yaml
+record:
+  enabled: True
+  export:
+    timelapse_args: "-vf setpts=PTS/60 -r 25"
+```
+
+:::tip
+
+When using `hwaccel_args` globally hardware encoding is used for time lapse generation. The encoder determines its own behavior so the resulting file size may be undesirably large.
+To reduce the output file size the ffmpeg parameter `-qp n` can be utilized (where `n` stands for the value of the quantisation parameter). The value can be adjusted to get an acceptable tradeoff between quality and file size for the given scenario.
+
+:::
 
 ## Syncing Recordings With Disk
 

docs/docs/configuration/reference.md

@@ -0,0 +1,725 @@
+---
+id: reference
+title: Full Reference Config
+---
+
+### Full configuration reference:
+
+:::warning
+
+It is not recommended to copy this full configuration file. Only specify values that are different from the defaults. Configuration options and default values may change in future versions.
+
+:::
+
+```yaml
+mqtt:
+  # Optional: Enable mqtt server (default: shown below)
+  enabled: True
+  # Required: host name
+  host: mqtt.server.com
+  # Optional: port (default: shown below)
+  port: 1883
+  # Optional: topic prefix (default: shown below)
+  # NOTE: must be unique if you are running multiple instances
+  topic_prefix: frigate
+  # Optional: client id (default: shown below)
+  # NOTE: must be unique if you are running multiple instances
+  client_id: frigate
+  # Optional: user
+  # NOTE: MQTT user can be specified with an environment variable or docker secrets that must begin with 'FRIGATE_'.
+  #       e.g. user: '{FRIGATE_MQTT_USER}'
+  user: mqtt_user
+  # Optional: password
+  # NOTE: MQTT password can be specified with an environment variable or docker secrets that must begin with 'FRIGATE_'.
+  #       e.g. password: '{FRIGATE_MQTT_PASSWORD}'
+  password: password
+  # Optional: tls_ca_certs for enabling TLS using self-signed certs (default: None)
+  tls_ca_certs: /path/to/ca.crt
+  # Optional: tls_client_cert and tls_client key in order to use self-signed client
+  # certificates (default: None)
+  # NOTE: certificate must not be password-protected
+  #       do not set user and password when using a client certificate
+  tls_client_cert: /path/to/client.crt
+  tls_client_key: /path/to/client.key
+  # Optional: tls_insecure (true/false) for enabling TLS verification of
+  # the server hostname in the server certificate (default: None)
+  tls_insecure: false
+  # Optional: interval in seconds for publishing stats (default: shown below)
+  stats_interval: 60
+
+# Optional: Detectors configuration. Defaults to a single CPU detector
+detectors:
+  # Required: name of the detector
+  detector_name:
+    # Required: type of the detector
+    # Frigate provided types include 'cpu', 'edgetpu', 'openvino' and 'tensorrt' (default: shown below)
+    # Additional detector types can also be plugged in.
+    # Detectors may require additional configuration.
+    # Refer to the Detectors configuration page for more information.
+    type: cpu
+
+# Optional: Database configuration
+database:
+  # The path to store the SQLite DB (default: shown below)
+  path: /config/frigate.db
+
+# Optional: TLS configuration
+tls:
+  # Optional: Enable TLS for port 8971 (default: shown below)
+  enabled: True
+
+# Optional: Proxy configuration
+proxy:
+  # Optional: Mapping for headers from upstream proxies. Only used if Frigate's auth
+  # is disabled.
+  # NOTE: Many authentication proxies pass a header downstream with the authenticated
+  #       user name. Not all values are supported. It must be a whitelisted header.
+  #       See the docs for more info.
+  header_map:
+    user: x-forwarded-user
+  # Optional: Url for logging out a user. This sets the location of the logout url in
+  # the UI.
+  logout_url: /api/logout
+  # Optional: Auth secret that is checked against the X-Proxy-Secret header sent from
+  # the proxy. If not set, all requests are trusted regardless of origin.
+  auth_secret: None
+
+# Optional: Authentication configuration
+auth:
+  # Optional: Enable authentication
+  enabled: True
+  # Optional: Reset the admin user password on startup (default: shown below)
+  # New password is printed in the logs
+  reset_admin_password: False
+  # Optional: Cookie to store the JWT token for native auth (default: shown below)
+  cookie_name: frigate_token
+  # Optional: Set secure flag on cookie. (default: shown below)
+  # NOTE: This should be set to True if you are using TLS
+  cookie_secure: False
+  # Optional: Session length in seconds (default: shown below)
+  session_length: 86400 # 24 hours
+  # Optional: Refresh time in seconds (default: shown below)
+  # When the session is going to expire in less time than this setting,
+  # it will be refreshed back to the session_length.
+  refresh_time: 43200 # 12 hours
+  # Optional: Rate limiting for login failures to help prevent brute force
+  # login attacks (default: shown below)
+  # See the docs for more information on valid values
+  failed_login_rate_limit: None
+  # Optional: Trusted proxies for determining IP address to rate limit
+  # NOTE: This is only used for rate limiting login attempts and does not bypass
+  # authentication. See the authentication docs for more details.
+  trusted_proxies: []
+  # Optional: Number of hashing iterations for user passwords
+  # As of Feb 2023, OWASP recommends 600000 iterations for PBKDF2-SHA256
+  # NOTE: changing this value will not automatically update password hashes, you
+  #       will need to change each user password for it to apply
+  hash_iterations: 600000
+
+# Optional: model modifications
+model:
+  # Optional: path to the model (default: automatic based on detector)
+  path: /edgetpu_model.tflite
+  # Optional: path to the labelmap (default: shown below)
+  labelmap_path: /labelmap.txt
+  # Required: Object detection model input width (default: shown below)
+  width: 320
+  # Required: Object detection model input height (default: shown below)
+  height: 320
+  # Optional: Object detection model input colorspace
+  # Valid values are rgb, bgr, or yuv. (default: shown below)
+  input_pixel_format: rgb
+  # Optional: Object detection model input tensor format
+  # Valid values are nhwc or nchw (default: shown below)
+  input_tensor: nhwc
+  # Optional: Object detection model type, currently only used with the OpenVINO detector
+  # Valid values are ssd, yolox, yolonas (default: shown below)
+  model_type: ssd
+  # Optional: Label name modifications. These are merged into the standard labelmap.
+  labelmap:
+    2: vehicle
+
+# Optional: Audio Events Configuration
+# NOTE: Can be overridden at the camera level
+audio:
+  # Optional: Enable audio events (default: shown below)
+  enabled: False
+  # Optional: Configure the amount of seconds without detected audio to end the event (default: shown below)
+  max_not_heard: 30
+  # Optional: Configure the min rms volume required to run audio detection (default: shown below)
+  # As a rule of thumb:
+  #  - 200 - high sensitivity
+  #  - 500 - medium sensitivity
+  #  - 1000 - low sensitivity
+  min_volume: 500
+  # Optional: Types of audio to listen for (default: shown below)
+  listen:
+    - bark
+    - fire_alarm
+    - scream
+    - speech
+    - yell
+  # Optional: Filters to configure detection.
+  filters:
+    # Label that matches label in listen config.
+    speech:
+      # Minimum score that triggers an audio event (default: shown below)
+      threshold: 0.8
+
+# Optional: logger verbosity settings
+logger:
+  # Optional: Default log verbosity (default: shown below)
+  default: info
+  # Optional: Component specific logger overrides
+  logs:
+    frigate.event: debug
+
+# Optional: set environment variables
+environment_vars:
+  EXAMPLE_VAR: value
+
+# Optional: birdseye configuration
+# NOTE: Can (enabled, mode) be overridden at the camera level
+birdseye:
+  # Optional: Enable birdseye view (default: shown below)
+  enabled: True
+  # Optional: Restream birdseye via RTSP (default: shown below)
+  # NOTE: Enabling this will set birdseye to run 24/7 which may increase CPU usage somewhat.
+  restream: False
+  # Optional: Width of the output resolution (default: shown below)
+  width: 1280
+  # Optional: Height of the output resolution (default: shown below)
+  height: 720
+  # Optional: Encoding quality of the mpeg1 feed (default: shown below)
+  # 1 is the highest quality, and 31 is the lowest. Lower quality feeds utilize less CPU resources.
+  quality: 8
+  # Optional: Mode of the view. Available options are: objects, motion, and continuous
+  #   objects - cameras are included if they have had a tracked object within the last 30 seconds
+  #   motion - cameras are included if motion was detected in the last 30 seconds
+  #   continuous - all cameras are included always
+  mode: objects
+  # Optional: Threshold for camera activity to stop showing camera (default: shown below)
+  inactivity_threshold: 30
+  # Optional: Configure the birdseye layout
+  layout:
+    # Optional: Scaling factor for the layout calculator, range 1.0-5.0 (default: shown below)
+    scaling_factor: 2.0
+    # Optional: Maximum number of cameras to show at one time, showing the most recent (default: show all cameras)
+    max_cameras: 1
+
+# Optional: ffmpeg configuration
+# More information about presets at https://docs.frigate.video/configuration/ffmpeg_presets
+ffmpeg:
+  # Optional: global ffmpeg args (default: shown below)
+  global_args: -hide_banner -loglevel warning -threads 2
+  # Optional: global hwaccel args (default: auto detect)
+  # NOTE: See hardware acceleration docs for your specific device
+  hwaccel_args: "auto"
+  # Optional: global input args (default: shown below)
+  input_args: preset-rtsp-generic
+  # Optional: global output args
+  output_args:
+    # Optional: output args for detect streams (default: shown below)
+    detect: -threads 2 -f rawvideo -pix_fmt yuv420p
+    # Optional: output args for record streams (default: shown below)
+    record: preset-record-generic
+  # Optional: Time in seconds to wait before ffmpeg retries connecting to the camera. (default: shown below)
+  # If set too low, frigate will retry a connection to the camera's stream too frequently, using up the limited streams some cameras can allow at once
+  # If set too high, then if a ffmpeg crash or camera stream timeout occurs, you could potentially lose up to a maximum of retry_interval second(s) of footage
+  # NOTE: this can be a useful setting for Wireless / Battery cameras to reduce how much footage is potentially lost during a connection timeout.
+  retry_interval: 10
+
+# Optional: Detect configuration
+# NOTE: Can be overridden at the camera level
+detect:
+  # Optional: width of the frame for the input with the detect role (default: use native stream resolution)
+  width: 1280
+  # Optional: height of the frame for the input with the detect role (default: use native stream resolution)
+  height: 720
+  # Optional: desired fps for your camera for the input with the detect role (default: shown below)
+  # NOTE: Recommended value of 5. Ideally, try and reduce your FPS on the camera.
+  fps: 5
+  # Optional: enables detection for the camera (default: True)
+  enabled: True
+  # Optional: Number of consecutive detection hits required for an object to be initialized in the tracker. (default: 1/2 the frame rate)
+  min_initialized: 2
+  # Optional: Number of frames without a detection before Frigate considers an object to be gone. (default: 5x the frame rate)
+  max_disappeared: 25
+  # Optional: Configuration for stationary object tracking
+  stationary:
+    # Optional: Frequency for confirming stationary objects (default: same as threshold)
+    # When set to 1, object detection will run to confirm the object still exists on every frame.
+    # If set to 10, object detection will run to confirm the object still exists on every 10th frame.
+    interval: 50
+    # Optional: Number of frames without a position change for an object to be considered stationary (default: 10x the frame rate or 10s)
+    threshold: 50
+    # Optional: Define a maximum number of frames for tracking a stationary object (default: not set, track forever)
+    # This can help with false positives for objects that should only be stationary for a limited amount of time.
+    # It can also be used to disable stationary object tracking. For example, you may want to set a value for person, but leave
+    # car at the default.
+    # WARNING: Setting these values overrides default behavior and disables stationary object tracking.
+    #          There are very few situations where you would want it disabled. It is NOT recommended to
+    #          copy these values from the example config into your config unless you know they are needed.
+    max_frames:
+      # Optional: Default for all object types (default: not set, track forever)
+      default: 3000
+      # Optional: Object specific values
+      objects:
+        person: 1000
+  # Optional: Milliseconds to offset detect annotations by (default: shown below).
+  # There can often be latency between a recording and the detect process,
+  # especially when using separate streams for detect and record.
+  # Use this setting to make the timeline bounding boxes more closely align
+  # with the recording. The value can be positive or negative.
+  # TIP: Imagine there is an event clip with a person walking from left to right.
+  #      If the event timeline bounding box is consistently to the left of the person
+  #      then the value should be decreased. Similarly, if a person is walking from
+  #      left to right and the bounding box is consistently ahead of the person
+  #      then the value should be increased.
+  # TIP: This offset is dynamic so you can change the value and it will update existing
+  #      events, this makes it easy to tune.
+  # WARNING: Fast moving objects will likely not have the bounding box align.
+  annotation_offset: 0
+
+# Optional: Object configuration
+# NOTE: Can be overridden at the camera level
+objects:
+  # Optional: list of objects to track from labelmap.txt (default: shown below)
+  track:
+    - person
+  # Optional: mask to prevent all object types from being detected in certain areas (default: no mask)
+  # Checks based on the bottom center of the bounding box of the object.
+  # NOTE: This mask is COMBINED with the object type specific mask below
+  mask: 0.000,0.000,0.781,0.000,0.781,0.278,0.000,0.278
+  # Optional: filters to reduce false positives for specific object types
+  filters:
+    person:
+      # Optional: minimum width*height of the bounding box for the detected object (default: 0)
+      min_area: 5000
+      # Optional: maximum width*height of the bounding box for the detected object (default: 24000000)
+      max_area: 100000
+      # Optional: minimum width/height of the bounding box for the detected object (default: 0)
+      min_ratio: 0.5
+      # Optional: maximum width/height of the bounding box for the detected object (default: 24000000)
+      max_ratio: 2.0
+      # Optional: minimum score for the object to initiate tracking (default: shown below)
+      min_score: 0.5
+      # Optional: minimum decimal percentage for tracked object's computed score to be considered a true positive (default: shown below)
+      threshold: 0.7
+      # Optional: mask to prevent this object type from being detected in certain areas (default: no mask)
+      # Checks based on the bottom center of the bounding box of the object
+      mask: 0.000,0.000,0.781,0.000,0.781,0.278,0.000,0.278
+
+# Optional: Review configuration
+# NOTE: Can be overridden at the camera level
+review:
+  # Optional: alerts configuration
+  alerts:
+    # Optional: labels that qualify as an alert (default: shown below)
+    labels:
+      - car
+      - person
+    # Optional: required zones for an object to be marked as an alert (default: none)
+    required_zones:
+      - driveway
+  # Optional: detections configuration
+  detections:
+    # Optional: labels that qualify as a detection (default: all labels that are tracked / listened to)
+    labels:
+      - car
+      - person
+    # Optional: required zones for an object to be marked as a detection (default: none)
+    required_zones:
+      - driveway
+
+# Optional: Motion configuration
+# NOTE: Can be overridden at the camera level
+motion:
+  # Optional: The threshold passed to cv2.threshold to determine if a pixel is different enough to be counted as motion. (default: shown below)
+  # Increasing this value will make motion detection less sensitive and decreasing it will make motion detection more sensitive.
+  # The value should be between 1 and 255.
+  threshold: 30
+  # Optional: The percentage of the image used to detect lightning or other substantial changes where motion detection
+  #           needs to recalibrate. (default: shown below)
+  # Increasing this value will make motion detection more likely to consider lightning or ir mode changes as valid motion.
+  # Decreasing this value will make motion detection more likely to ignore large amounts of motion such as a person approaching
+  # a doorbell camera.
+  lightning_threshold: 0.8
+  # Optional: Minimum size in pixels in the resized motion image that counts as motion (default: shown below)
+  # Increasing this value will prevent smaller areas of motion from being detected. Decreasing will
+  # make motion detection more sensitive to smaller moving objects.
+  # As a rule of thumb:
+  #  - 10 - high sensitivity
+  #  - 30 - medium sensitivity
+  #  - 50 - low sensitivity
+  contour_area: 10
+  # Optional: Alpha value passed to cv2.accumulateWeighted when averaging frames to determine the background (default: shown below)
+  # Higher values mean the current frame impacts the average a lot, and a new object will be averaged into the background faster.
+  # Low values will cause things like moving shadows to be detected as motion for longer.
+  # https://www.geeksforgeeks.org/background-subtraction-in-an-image-using-concept-of-running-average/
+  frame_alpha: 0.01
+  # Optional: Height of the resized motion frame  (default: 100)
+  # Higher values will result in more granular motion detection at the expense of higher CPU usage.
+  # Lower values result in less CPU, but small changes may not register as motion.
+  frame_height: 100
+  # Optional: motion mask
+  # NOTE: see docs for more detailed info on creating masks
+  mask: 0.000,0.469,1.000,0.469,1.000,1.000,0.000,1.000
+  # Optional: improve contrast (default: shown below)
+  # Enables dynamic contrast improvement. This should help improve night detections at the cost of making motion detection more sensitive
+  # for daytime.
+  improve_contrast: True
+  # Optional: Delay when updating camera motion through MQTT from ON -> OFF (default: shown below).
+  mqtt_off_delay: 30
+
+# Optional: Record configuration
+# NOTE: Can be overridden at the camera level
+record:
+  # Optional: Enable recording (default: shown below)
+  # WARNING: If recording is disabled in the config, turning it on via
+  #          the UI or MQTT later will have no effect.
+  enabled: False
+  # Optional: Number of minutes to wait between cleanup runs (default: shown below)
+  # This can be used to reduce the frequency of deleting recording segments from disk if you want to minimize i/o
+  expire_interval: 60
+  # Optional: Sync recordings with disk on startup and once a day (default: shown below).
+  sync_recordings: False
+  # Optional: Retention settings for recording
+  retain:
+    # Optional: Number of days to retain recordings regardless of events (default: shown below)
+    # NOTE: This should be set to 0 and retention should be defined in events section below
+    #       if you only want to retain recordings of events.
+    days: 0
+    # Optional: Mode for retention. Available options are: all, motion, and active_objects
+    #   all - save all recording segments regardless of activity
+    #   motion - save all recordings segments with any detected motion
+    #   active_objects - save all recording segments with active/moving objects
+    # NOTE: this mode only applies when the days setting above is greater than 0
+    mode: all
+  # Optional: Recording Export Settings
+  export:
+    # Optional: Timelapse Output Args (default: shown below).
+    # NOTE: The default args are set to fit 24 hours of recording into 1 hour playback.
+    # See https://stackoverflow.com/a/58268695 for more info on how these args work.
+    # As an example: if you wanted to go from 24 hours to 30 minutes that would be going
+    # from 86400 seconds to 1800 seconds which would be 1800 / 86400 = 0.02.
+    # The -r (framerate) dictates how smooth the output video is.
+    # So the args would be -vf setpts=0.02*PTS -r 30 in that case.
+    timelapse_args: "-vf setpts=0.04*PTS -r 30"
+  # Optional: Recording Preview Settings
+  preview:
+    # Optional: Quality of recording preview (default: shown below).
+    # Options are: very_low, low, medium, high, very_high
+    quality: medium
+  # Optional: Event recording settings
+  events:
+    # Optional: Number of seconds before the event to include (default: shown below)
+    pre_capture: 5
+    # Optional: Number of seconds after the event to include (default: shown below)
+    post_capture: 5
+    # Optional: Objects to save recordings for. (default: all tracked objects)
+    objects:
+      - person
+    # Optional: Retention settings for recordings of events
+    retain:
+      # Required: Default retention days (default: shown below)
+      default: 10
+      # Optional: Mode for retention. (default: shown below)
+      #   all - save all recording segments for events regardless of activity
+      #   motion - save all recordings segments for events with any detected motion
+      #   active_objects - save all recording segments for event with active/moving objects
+      #
+      # NOTE: If the retain mode for the camera is more restrictive than the mode configured
+      #       here, the segments will already be gone by the time this mode is applied.
+      #       For example, if the camera retain mode is "motion", the segments without motion are
+      #       never stored, so setting the mode to "all" here won't bring them back.
+      mode: motion
+      # Optional: Per object retention days
+      objects:
+        person: 15
+
+# Optional: Configuration for the jpg snapshots written to the clips directory for each event
+# NOTE: Can be overridden at the camera level
+snapshots:
+  # Optional: Enable writing jpg snapshot to /media/frigate/clips (default: shown below)
+  enabled: False
+  # Optional: save a clean PNG copy of the snapshot image (default: shown below)
+  clean_copy: True
+  # Optional: print a timestamp on the snapshots (default: shown below)
+  timestamp: False
+  # Optional: draw bounding box on the snapshots (default: shown below)
+  bounding_box: True
+  # Optional: crop the snapshot (default: shown below)
+  crop: False
+  # Optional: height to resize the snapshot to (default: original size)
+  height: 175
+  # Optional: Restrict snapshots to objects that entered any of the listed zones (default: no required zones)
+  required_zones: []
+  # Optional: Camera override for retention settings (default: global values)
+  retain:
+    # Required: Default retention days (default: shown below)
+    default: 10
+    # Optional: Per object retention days
+    objects:
+      person: 15
+  # Optional: quality of the encoded jpeg, 0-100 (default: shown below)
+  quality: 70
+
+# Optional: Restream configuration
+# Uses https://github.com/AlexxIT/go2rtc (v1.9.2)
+go2rtc:
+
+# Optional: jsmpeg stream configuration for WebUI
+live:
+  # Optional: Set the name of the stream that should be used for live view
+  # in frigate WebUI. (default: name of camera)
+  stream_name: camera_name
+  # Optional: Set the height of the jsmpeg stream. (default: 720)
+  # This must be less than or equal to the height of the detect stream. Lower resolutions
+  # reduce bandwidth required for viewing the jsmpeg stream. Width is computed to match known aspect ratio.
+  height: 720
+  # Optional: Set the encode quality of the jsmpeg stream (default: shown below)
+  # 1 is the highest quality, and 31 is the lowest. Lower quality feeds utilize less CPU resources.
+  quality: 8
+
+# Optional: in-feed timestamp style configuration
+# NOTE: Can be overridden at the camera level
+timestamp_style:
+  # Optional: Position of the timestamp (default: shown below)
+  #           "tl" (top left), "tr" (top right), "bl" (bottom left), "br" (bottom right)
+  position: "tl"
+  # Optional: Format specifier conform to the Python package "datetime" (default: shown below)
+  #           Additional Examples:
+  #             german: "%d.%m.%Y %H:%M:%S"
+  format: "%m/%d/%Y %H:%M:%S"
+  # Optional: Color of font
+  color:
+    # All Required when color is specified (default: shown below)
+    red: 255
+    green: 255
+    blue: 255
+  # Optional: Line thickness of font (default: shown below)
+  thickness: 2
+  # Optional: Effect of lettering (default: shown below)
+  #           None (No effect),
+  #           "solid" (solid background in inverse color of font)
+  #           "shadow" (shadow for font)
+  effect: None
+
+# Required
+cameras:
+  # Required: name of the camera
+  back:
+    # Optional: Enable/Disable the camera (default: shown below).
+    # If disabled: config is used but no live stream and no capture etc.
+    # Events/Recordings are still viewable.
+    enabled: True
+    # Required: ffmpeg settings for the camera
+    ffmpeg:
+      # Required: A list of input streams for the camera. See documentation for more information.
+      inputs:
+        # Required: the path to the stream
+        # NOTE: path may include environment variables or docker secrets, which must begin with 'FRIGATE_' and be referenced in {}
+        - path: rtsp://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2
+          # Required: list of roles for this stream. valid values are: audio,detect,record
+          # NOTICE: In addition to assigning the audio, detect, and record roles
+          # they must also be enabled in the camera config.
+          roles:
+            - audio
+            - detect
+            - record
+          # Optional: stream specific global args (default: inherit)
+          # global_args:
+          # Optional: stream specific hwaccel args (default: inherit)
+          # hwaccel_args:
+          # Optional: stream specific input args (default: inherit)
+          # input_args:
+      # Optional: camera specific global args (default: inherit)
+      # global_args:
+      # Optional: camera specific hwaccel args (default: inherit)
+      # hwaccel_args:
+      # Optional: camera specific input args (default: inherit)
+      # input_args:
+      # Optional: camera specific output args (default: inherit)
+      # output_args:
+
+    # Optional: timeout for highest scoring image before allowing it
+    # to be replaced by a newer image. (default: shown below)
+    best_image_timeout: 60
+
+    # Optional: URL to visit the camera web UI directly from the system page. Might not be available on every camera.
+    webui_url: ""
+
+    # Optional: zones for this camera
+    zones:
+      # Required: name of the zone
+      # NOTE: This must be different than any camera names, but can match with another zone on another
+      #       camera.
+      front_steps:
+        # Required: List of x,y coordinates to define the polygon of the zone.
+        # NOTE: Presence in a zone is evaluated only based on the bottom center of the objects bounding box.
+        coordinates: 0.284,0.997,0.389,0.869,0.410,0.745
+        # Optional: Number of consecutive frames required for object to be considered present in the zone (default: shown below).
+        inertia: 3
+        # Optional: Number of seconds that an object must loiter to be considered in the zone (default: shown below)
+        loitering_time: 0
+        # Optional: List of objects that can trigger this zone (default: all tracked objects)
+        objects:
+          - person
+        # Optional: Zone level object filters.
+        # NOTE: The global and camera filters are applied upstream.
+        filters:
+          person:
+            min_area: 5000
+            max_area: 100000
+            threshold: 0.7
+
+    # Optional: Configuration for the jpg snapshots published via MQTT
+    mqtt:
+      # Optional: Enable publishing snapshot via mqtt for camera (default: shown below)
+      # NOTE: Only applies to publishing image data to MQTT via 'frigate/<camera_name>/<object_name>/snapshot'.
+      # All other messages will still be published.
+      enabled: True
+      # Optional: print a timestamp on the snapshots (default: shown below)
+      timestamp: True
+      # Optional: draw bounding box on the snapshots (default: shown below)
+      bounding_box: True
+      # Optional: crop the snapshot (default: shown below)
+      crop: True
+      # Optional: height to resize the snapshot to (default: shown below)
+      height: 270
+      # Optional: jpeg encode quality (default: shown below)
+      quality: 70
+      # Optional: Restrict mqtt messages to objects that entered any of the listed zones (default: no required zones)
+      required_zones: []
+
+    # Optional: Configuration for how camera is handled in the GUI.
+    ui:
+      # Optional: Adjust sort order of cameras in the UI. Larger numbers come later (default: shown below)
+      # By default the cameras are sorted alphabetically.
+      order: 0
+      # Optional: Whether or not to show the camera in the Frigate UI (default: shown below)
+      dashboard: True
+
+    # Optional: connect to ONVIF camera
+    # to enable PTZ controls.
+    onvif:
+      # Required: host of the camera being connected to.
+      host: 0.0.0.0
+      # Optional: ONVIF port for device (default: shown below).
+      port: 8000
+      # Optional: username for login.
+      # NOTE: Some devices require admin to access ONVIF.
+      user: admin
+      # Optional: password for login.
+      password: admin
+      # Optional: Ignores time synchronization mismatches between the camera and the server during authentication. 
+      # Using NTP on both ends is recommended and this should only be set to True in a "safe" environment due to the security risk it represents. 
+      ignore_time_mismatch: False
+      # Optional: PTZ camera object autotracking. Keeps a moving object in
+      # the center of the frame by automatically moving the PTZ camera.
+      autotracking:
+        # Optional: enable/disable object autotracking. (default: shown below)
+        enabled: False
+        # Optional: calibrate the camera on startup (default: shown below)
+        # A calibration will move the PTZ in increments and measure the time it takes to move.
+        # The results are used to help estimate the position of tracked objects after a camera move.
+        # Frigate will update your config file automatically after a calibration with
+        # a "movement_weights" entry for the camera. You should then set calibrate_on_startup to False.
+        calibrate_on_startup: False
+        # Optional: the mode to use for zooming in/out on objects during autotracking. (default: shown below)
+        # Available options are: disabled, absolute, and relative
+        #   disabled - don't zoom in/out on autotracked objects, use pan/tilt only
+        #   absolute - use absolute zooming (supported by most PTZ capable cameras)
+        #   relative - use relative zooming (not supported on all PTZs, but makes concurrent pan/tilt/zoom movements)
+        zooming: disabled
+        # Optional: A value to change the behavior of zooming on autotracked objects. (default: shown below)
+        # A lower value will keep more of the scene in view around a tracked object.
+        # A higher value will zoom in more on a tracked object, but Frigate may lose tracking more quickly.
+        # The value should be between 0.1 and 0.75
+        zoom_factor: 0.3
+        # Optional: list of objects to track from labelmap.txt (default: shown below)
+        track:
+          - person
+        # Required: Begin automatically tracking an object when it enters any of the listed zones.
+        required_zones:
+          - zone_name
+        # Required: Name of ONVIF preset in camera's firmware to return to when tracking is over. (default: shown below)
+        return_preset: home
+        # Optional: Seconds to delay before returning to preset. (default: shown below)
+        timeout: 10
+        # Optional: Values generated automatically by a camera calibration. Do not modify these manually. (default: shown below)
+        movement_weights: []
+
+    # Optional: Configuration for how to sort the cameras in the Birdseye view.
+    birdseye:
+      # Optional: Adjust sort order of cameras in the Birdseye view. Larger numbers come later (default: shown below)
+      # By default the cameras are sorted alphabetically.
+      order: 0
+
+# Optional
+ui:
+  # Optional: Set a timezone to use in the UI (default: use browser local time)
+  # timezone: America/Denver
+  # Optional: Set the time format used.
+  # Options are browser, 12hour, or 24hour (default: shown below)
+  time_format: browser
+  # Optional: Set the date style for a specified length.
+  # Options are: full, long, medium, short
+  # Examples:
+  #    short: 2/11/23
+  #    medium: Feb 11, 2023
+  #    full: Saturday, February 11, 2023
+  # (default: shown below).
+  date_style: short
+  # Optional: Set the time style for a specified length.
+  # Options are: full, long, medium, short
+  # Examples:
+  #    short: 8:14 PM
+  #    medium: 8:15:22 PM
+  #    full: 8:15:22 PM Mountain Standard Time
+  # (default: shown below).
+  time_style: medium
+  # Optional: Ability to manually override the date / time styling to use strftime format
+  # https://www.gnu.org/software/libc/manual/html_node/Formatting-Calendar-Time.html
+  # possible values are shown above (default: not set)
+  strftime_fmt: "%Y/%m/%d %H:%M"
+
+# Optional: Telemetry configuration
+telemetry:
+  # Optional: Enabled network interfaces for bandwidth stats monitoring (default: empty list, let nethogs search all)
+  network_interfaces:
+    - eth
+    - enp
+    - eno
+    - ens
+    - wl
+    - lo
+  # Optional: Configure system stats
+  stats:
+    # Enable AMD GPU stats (default: shown below)
+    amd_gpu_stats: True
+    # Enable Intel GPU stats (default: shown below)
+    intel_gpu_stats: True
+    # Enable network bandwidth stats monitoring for camera ffmpeg processes, go2rtc, and object detectors. (default: shown below)
+    # NOTE: The container must either be privileged or have cap_net_admin, cap_net_raw capabilities enabled.
+    network_bandwidth: False
+  # Optional: Enable the latest version outbound check (default: shown below)
+  # NOTE: If you use the HomeAssistant integration, disabling this will prevent it from reporting new versions
+  version_check: True
+
+# Optional: Camera groups (default: no groups are setup)
+# NOTE: It is recommended to use the UI to setup camera groups
+camera_groups:
+  # Required: Name of camera group
+  front:
+    # Required: list of cameras in the group
+    cameras:
+      - front_cam
+      - side_cam
+      - front_doorbell_cam
+    # Required: icon used for group
+    icon: car
+    # Required: index of this group
+    order: 0
+```