forked from Github/frigate
clean house on clips
This commit is contained in:
Blake Blackshear
@@ -5,7 +5,7 @@ title: Cameras
|
||||
|
||||
## Setting Up Camera Inputs
|
||||
|
||||
Up to 4 inputs can be configured for each camera and the role of each input can be mixed and matched based on your needs. This allows you to use a lower resolution stream for object detection, but create clips from a higher resolution stream, or vice versa.
|
||||
Up to 4 inputs can be configured for each camera and the role of each input can be mixed and matched based on your needs. This allows you to use a lower resolution stream for object detection, but create recordings from a higher resolution stream, or vice versa.
|
||||
|
||||
Each role can only be assigned to one input per camera. The options for roles are as follows:
|
||||
|
||||
@@ -30,7 +30,6 @@ cameras:
|
||||
- rtmp
|
||||
- path: rtsp://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/live
|
||||
roles:
|
||||
- clips
|
||||
- record
|
||||
detect:
|
||||
width: 1280
|
||||
@@ -136,7 +135,7 @@ objects:
|
||||
|
||||
24/7 recordings can be enabled and are stored at `/media/frigate/recordings`. The folder structure for the recordings is `YYYY-MM/DD/HH/<camera_name>/MM.SS.mp4`. These recordings are written directly from your camera stream without re-encoding and are available in Home Assistant's media browser. Each camera supports a configurable retention policy in the config.
|
||||
|
||||
Clips are also created off of these recordings. Frigate chooses the largest matching retention value between the recording retention and the event retention when determining if a recording should be removed.
|
||||
Exported clips are also created off of these recordings. Frigate chooses the largest matching retention value between the recording retention and the event retention when determining if a recording should be removed.
|
||||
|
||||
These recordings will not be playable in the web UI or in Home Assistant's media browser unless your camera sends video as h264.
|
||||
|
||||
@@ -158,16 +157,16 @@ record:
|
||||
# NOTE: If an object is being tracked for longer than this amount of time, the cache
|
||||
# will begin to expire and the resulting clip will be the last x seconds of the event unless retain_days under record is > 0.
|
||||
max_seconds: 300
|
||||
# Optional: Number of seconds before the event to include in the clips (default: shown below)
|
||||
# Optional: Number of seconds before the event to include in the event (default: shown below)
|
||||
pre_capture: 5
|
||||
# Optional: Number of seconds after the event to include in the clips (default: shown below)
|
||||
# Optional: Number of seconds after the event to include in the event (default: shown below)
|
||||
post_capture: 5
|
||||
# Optional: Objects to save clips for. (default: all tracked objects)
|
||||
# Optional: Objects to save event for. (default: all tracked objects)
|
||||
objects:
|
||||
- person
|
||||
# Optional: Restrict clips to objects that entered any of the listed zones (default: no required zones)
|
||||
# Optional: Restrict event to objects that entered any of the listed zones (default: no required zones)
|
||||
required_zones: []
|
||||
# Optional: Retention settings for clips
|
||||
# Optional: Retention settings for event
|
||||
retain:
|
||||
# Required: Default retention days (default: shown below)
|
||||
default: 10
|
||||
@@ -262,8 +261,8 @@ cameras:
|
||||
# Required: the path to the stream
|
||||
# NOTE: Environment variables that begin with 'FRIGATE_' may be referenced in {}
|
||||
- path: rtsp://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2
|
||||
# Required: list of roles for this stream. valid values are: detect,record,clips,rtmp
|
||||
# NOTICE: In addition to assigning the record, clips, and rtmp roles,
|
||||
# Required: list of roles for this stream. valid values are: detect,record,rtmp
|
||||
# NOTICE: In addition to assigning the record, and rtmp roles,
|
||||
# they must also be enabled in the camera config.
|
||||
roles:
|
||||
- detect
|
||||
@@ -328,34 +327,33 @@ cameras:
|
||||
max_area: 100000
|
||||
threshold: 0.7
|
||||
|
||||
# Optional: save clips configuration
|
||||
clips:
|
||||
# Required: enables clips for the camera (default: shown below)
|
||||
# This value can be set via MQTT and will be updated in startup based on retained value
|
||||
enabled: False
|
||||
# Optional: Number of seconds before the event to include in the clips (default: shown below)
|
||||
pre_capture: 5
|
||||
# Optional: Number of seconds after the event to include in the clips (default: shown below)
|
||||
post_capture: 5
|
||||
# Optional: Objects to save clips for. (default: all tracked objects)
|
||||
objects:
|
||||
- person
|
||||
# Optional: Restrict clips to objects that entered any of the listed zones (default: no required zones)
|
||||
required_zones: []
|
||||
# Optional: Camera override for retention settings (default: global values)
|
||||
retain:
|
||||
# Required: Default retention days (default: shown below)
|
||||
default: 10
|
||||
# Optional: Per object retention days
|
||||
objects:
|
||||
person: 15
|
||||
|
||||
# Optional: 24/7 recording configuration
|
||||
record:
|
||||
# Optional: Enable recording (default: global setting)
|
||||
enabled: False
|
||||
# Optional: Number of days to retain (default: global setting)
|
||||
retain_days: 30
|
||||
# Optional: Event recording settings
|
||||
events:
|
||||
# Required: enables event recordings for the camera (default: shown below)
|
||||
# This value can be set via MQTT and will be updated in startup based on retained value
|
||||
enabled: False
|
||||
# Optional: Number of seconds before the event to include (default: shown below)
|
||||
pre_capture: 5
|
||||
# Optional: Number of seconds after the event to include (default: shown below)
|
||||
post_capture: 5
|
||||
# Optional: Objects to save events for. (default: all tracked objects)
|
||||
objects:
|
||||
- person
|
||||
# Optional: Restrict events to objects that entered any of the listed zones (default: no required zones)
|
||||
required_zones: []
|
||||
# Optional: Camera override for retention settings (default: global values)
|
||||
retain:
|
||||
# Required: Default retention days (default: shown below)
|
||||
default: 10
|
||||
# Optional: Per object retention days
|
||||
objects:
|
||||
person: 15
|
||||
|
||||
# Optional: RTMP re-stream configuration
|
||||
rtmp:
|
||||
@@ -483,12 +481,11 @@ input_args:
|
||||
- "1"
|
||||
```
|
||||
|
||||
Note that mjpeg cameras require encoding the video into h264 for clips, recording, and rtmp roles. This will use significantly more CPU than if the cameras supported h264 feeds directly.
|
||||
Note that mjpeg cameras require encoding the video into h264 for recording, and rtmp roles. This will use significantly more CPU than if the cameras supported h264 feeds directly.
|
||||
|
||||
```yaml
|
||||
output_args:
|
||||
record: -f segment -segment_time 60 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c:v libx264 -an
|
||||
clips: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c:v libx264 -an
|
||||
rtmp: -c:v libx264 -an -f flv
|
||||
```
|
||||
|
||||
|
||||
Reference in New Issue
Block a user